Market leading real time kernel for 35+ microcontroller architectures
FreeRTOS is a market leading RTOS kernel from Amazon Web Services that supports more than 35 architectures and was downloaded once every 3 minutes during 2016. With millions of deployments in all imaginable market sectors (from toys to aircraft), the FreeRTOS kernel is trusted because it is professionally developed, strictly quality controlled, robust, supported, free to use in commercial products without a requirement to expose proprietary source code, and has no IP infringement risk. Amazon Web Services provides a highly reliable, scalable, low-cost cloud infrastructure platform that powers hundreds of thousands of businesses in 190 countries around the world. In 2015 AWS added specific Internet of Things (IoT) capabilities, and now offers Amazon FreeRTOS to help users securely connect their MCU devices to the cloud. Learn more at http://aws.amazon.com/freertos. ARM Cortex (Cortex-M0, Cortex-M0+, Cortex-M3, Cortex-M4, Cortex-M7, Cortex-A9, Cortex-A5), Renesas, TI, etc.
ChibiOS/RT is a free and efficient RTOS designed for deeply embedded applications. It offers a comprehensive set of kernel primitives and supports many architectures: ARM7, Cortex-M0, Cortex-M3, Cortex-M4, PowerPC e200z, STM8, AVR, MSP430, ColdFire, H8S, x86.
Raspberry PI minimal linux distribution
Moebius Linux is a Raspberry PI armhf distribution built from scratch and targeted to have a small footprint. 20Mb of RAM (with ssh) and a 128Mb SD are minimum requirements. Size, speed and optimizations are main goals for this distro, take a look at it and contribute if you like it
Open Source SW/HW Project for Embedded Ethernet Applications. Works with AVR ATmega256/128/103, AVR32, SAM7X, SAM7S(E), SAM9, AT91X40, GameBoy Advance, Cortex M3 / M4 (STM32, NXP LPC, LM3S), Freescale Coldfire, RTL8019AS, LAN91C111, CS8900 and DM9000E chips. Offers a tiny TCP/IP stack including HTTP, FTP and DHCP.
Alternative firmware and software with open source for platforms based on the SoC Realtek RTL8186. Альтернативная прошивка и ПО с открытым кодом для платформ на базе SoC Realtek RTL8186.
Open IoT & Smart Spaces framework
Freedomotic is an open source, flexible, secure Internet of Things (IoT) development framework, useful to build and manage modern smart spaces. It is targeted to private individuals (home automation) as well as business users (smart retail environments, ambient aware marketing, monitoring and analytics, etc). Freedomotic can interact with well known standard building automation protocols as well as with "do it yourself" solutions. It treats the web, social networks and branded frontends as first class components of the system. [GITHUB REPOSITORY] https://github.com/freedomotic/freedomotic [USERS' MANUAL] http://freedomotic-user-manual.readthedocs.io/ [DEVELOPERS' MANUAL] http://freedomotic-developer-manual.readthedocs.io/ [INTERNATIONAL COMMUNITY] https://groups.google.com/forum/#!forum/freedom-domotics [ITALIAN COMMUNITY] https://groups.google.com/forum/#!forum/freedomotic-it [REPORT AN ISSUE] https://github.com/freedomotic/freedomotic/issues
Bootloader for STM32, XMC, HCS12 and other microcontroller targets.
OpenBLT is mostly used as an STM32 bootloader, due to the popularity of STM32 microcontrollers. However, the bootloader’s architecture is such that it can work with any microcontroller and use any type of communication interface to perform firmware updates.
Guide on porting Contiki to new hardware platforms + extensive Contiki OS port for the Semtech LoRaMote platform (STM32L1). The STM32L1XX Standard Peripherals Library and LoRaMac project were used to implement the microcontroller's components, radio transceiver and sensors. Tested with Contiki 2.6 and Contiki 3. https://github.com/contiki-os/contiki https://github.com/Lora-net/LoRaMac-node http://www.st.com/content/st_com/en/products/embedded-software/mcus-embedded-software/stm32-embedded-software/stm32-standard-peripheral-libraries/stsw-stm32077.html
a linux based readonly image as appliance
Visit also: https://github.com/Anthilla/AnthillaOS For more updated Informations. Usable as test/dev exercise for appliances An x86 64bit gentoo image customized for readonly usage as appliances, fully functional and complete of more than 1000 pkg based on a gentoo+systemd distro. Hypervisor (kvm or xen) Storage (ZFS and Gluster) Container (Docker) Networking (iproute2, nftable, OpenVSwitch, Bird) Antd (http://www.anthilla.com/en/software/antd/ ) web based management all open source components from other projects are released under respective licenses, all parts, files,subprojects developed as part or this project are released under the BSD 3 clause license.
DruidBSD is a FreeBSD micro-distribution that supports CD/DVD, USB, and HD booting into a Live BSD Distribution.
Simple USB flash memory programmer.
FlashProg is USB base flash memory programmer which is specifically design to read and program 3.3V SPI flash memory devices.
freeRTOS for Arduino Uno, Goldilocks 1284p & Mega 2560
AVR ATmega port of freeRTOS A port of freeRTOS which can be flexibly flexibly configured use almost any available Timer on AVR ATmega devices and will operate with almost any classic Arduino device from Arduino, SeeedStudio, Sparkfun, Freetronics or Pololu. Going forward this repository will be updated less often and only with major releases. Please check at Github for the latest commits. https://github.com/feilipu/avrfreertos The Goldilocks Analogue story is told here. http://feilipu.me/?s=Goldilocks+Analogue The Goldilocks 1284p story is here. http://feilipu.me/2013/03/08/goldilocks-1284p-arduino-uno-clone/ If this repository is too complicated to get started, a minimum AVR freeRTOS configured using the Watchdog Timer and Heap 3 is also also available. https://github.com/feilipu/miniAVRfreeRTOS For the Arduino platform there is a freeRTOS Library available in the Arduino IDE Library manager. https://github.com/feilipu/Arduino_FreeRTOS_Library
scmRTOS is tiny Real-Time Preemptive Operating System intended for use with Single-Chip Microcontrollers. scmRTOS is capable to run on small uCs with as little amount of RAM as 512 bytes. The RTOS is written on C++ and supports various platforms.
Cryptic Allusion Dreamcast-related development: KallistiOS, Ghetto Pong, etc.
amforth is an extendible interpreter on microcontrollers
amforth is an extendable command interpreter running on AVR ATmega and TI MSP430 microcontrollers. Turnkey actions for fully autonomous operations are possible as well. The command language is close to the Forth 2012 standard.
Project has been move to https://github.com/ciaa/Firmware
The project is not more active, we have fix a lot of issue and perform many improvements. These are now deliverd as part of a new project: https://github.com/ciaa/Firmware ---- FreeOSEK is a scalable solution for embedded system. FreeOSEK OS is based on OSEK RTOS specification (OSEK-VDX). visit us in: http://opensek.sourceforge.net
interp is a powerful programming language, a testing platform, and a development framework. It is targeted for Linux/Unix-based systems, yet remains adaptable to less powerful embedded systems that were never intended to host a programming language.
A software for upload .hex files to ATMEGA328P and compile .asm files
State machine framework for reactive embedded systems
RKH is a generic, flexible, modular, highly portable, ANSI-C compliant, and open-source development tool for implementing hierarchical state machines based on modern state machine concepts. This modern techniques are used to give an abstract description of the dynamic behavior of a system in a substantial manner. The RKH not implements neither entire UML specs. nor entire Statechart specs. Instead, the RKH intention is to support just enough basic concepts of that powerful tools to facilitate the reactive-system modeling holding a solid, and efficient implementation. Broadly speaking, the RKH implementation has been designed from the ground up to be used in 8-bits platforms but can be easily adapted to 16 or 32-bits platforms.
Beaglebone Black C++ Library
BlackLib library is wrote for controlling Beaglebone Black's feature. It takes power from C++ language. It is created for reading analog input, generating pwm signal, using gpio pins, and communicating with other devices over uart, spi and i2c. In addition to them, it includes debugging feature. So you can check errors after call any function in the library.
MicroLua brings Lua on the Nintendo DS for easy programming
MicroLua brings the programming language Lua on the Nintendo DS for easy and fast development of beautiful homebrews! Based on brunni's µLibrary, µLua is a Lua interpreter featuring fast drawings and many important functionalities. You can exploit your Nintendo DS with the simplistic yet powerful Lua language! On your cartridge, MicroLua is a NDS executable that shows as its frontend a great graphical shell from which you can explore your cartridge and run Lua scripts written for µLua. µLua already benefits from an impressive collection of homebrews, from a complete and expandable MicroLua IDE to enjoyable games, produced by an active and helpful community.
Real-time, modular, microkernel-based operating system under development for i386. The first goal is to support 32-bit DOS protected mode applications made with DJGPP as well as native applications.
Windows XP reimplemented on Nintendo DS
WinDS is a Reimplementation of the OS Windows(R) XP(R) on the Platform Nintendo DS. Since i started coding Apps for the NDS, my goal was to write a program, called WinDS, which does (nearly) the same as the real appy by Microsoft. In contrast to other little NDS-Operating Systems, just like Woopsi etc. you can code your own Application in Lua for WinDS: just copy the Code onto the FAT-Disk and execute it from within WinDS! This is what makes WinDS so unique. The New Beta 0.95 is out, it features - 52 Classes that are already available within Lua - 25 different types of user interface classes - 8 different predefined dialogs which makes it the perfect GUI sandbox for DS. PS: More time without update means: next update will have even more improvements, as i am still developing ;)
A memory device programmer (Flash / EPROM / E2PROM) board and software, connected to PC by USB port. Placa e software para gravação de memórias (Flash / EPROM / E2PROM), conectada ao PC através de porta USB.
Recirculation infusion mash system library for Arduino
This library implement RIMS controls for home brewers. For definition of a RIMS, see https://tinyurl.com/j3lyuyc For me, an Arduino micro controller + a LCD Keypad shield was cheaper and a lot more customizable than a commercial PID controller. So, with this library, a commercial PID controller is unnecessary. Automatic PID tuning toolkit is also included. Temperature can be read with a thermistor, a resistance temperature detector (RTD) or any custom temperature probe. Heater is controlled with pulse-width modulation (PWM) of a solid-state relay (SSR).