Recirculation infusion mash system library for Arduino
This library implement RIMS controls for home brewers. For definition of a RIMS, see https://tinyurl.com/j3lyuyc For me, an Arduino micro controller + a LCD Keypad shield was cheaper and a lot more customizable than a commercial PID controller. So, with this library, a commercial PID controller is unnecessary. Automatic PID tuning toolkit is also included. Temperature can be read with a thermistor, a resistance temperature detector (RTD) or any custom temperature probe. Heater is controlled with pulse-width modulation (PWM) of a solid-state relay (SSR).
A simple armv7h sdk
This is my sdk for usage with slackware on A20 devices like bananapi, cubietruck and olimex-som. For more info see https://github.com/tjohann/a20_sdk .
AVR-related utility code
This repository contains AVR-related utility code that I've written as alternatives to the Arduino libraries, including a Makefile framework, a tiny non-preemptive priority-based task scheduler a Serial driver that works with the standard C stdio APIs to be used, and a system clock.
free alternative firmware for the DLink DNS-320/320L/321/323/325/327L
Alt-F provides a free alternative firmware for the DLINK DNS-320/320L/321/323/325/327L. Alt-F has Samba and NFS; supports ext2/3/4, VFAT, NTFS and ISO9660 filesystems; RAID 0, 1, 5 (with external USB disk) and JBOD; supports 2/3/4TB disks; rsync, ftp, sftp, ftps, ssh, lpd, DNS and DHCP servers, DDNS, fan and leds control, clean power up and down... and more. Alt-F also has a set of comprehensive administering web pages, you don't need to use the command line to configure it. Besides the built-in software, Alt-F also supports additional packages on disk, including ffp and Entware-ng packages, that you can install, update and uninstall using the administering web pages Alt-F is being developed and tested on a DNS-323-rev-A1/B1, a DNS325-rev-A1, a DNS-320L-rev-A1 and on a DNS-327L-rev-A1 hardware boards. Other models and boards are said to work. Support Forum: http://groups.google.com/group/alt-f Homepage: http://sites.google.com/site/altfirmware
a linux based readonly image as appliance
Visit also: https://github.com/Anthilla/AnthillaOS For more updated Informations. Usable as test/dev exercise for appliances An x86 64bit gentoo image customized for readonly usage as appliances, fully functional and complete of more than 1000 pkg based on a gentoo+systemd distro. Hypervisor (kvm or xen) Storage (ZFS and Gluster) Container (Docker) Networking (iproute2, nftable, OpenVSwitch, Bird) Antd (http://www.anthilla.com/en/software/antd/ ) web based management all open source components from other projects are released under respective licenses, all parts, files,subprojects developed as part or this project are released under the BSD 3 clause license.
Dew Controller Feature Rich
3-channel fully automated Dew Controller (DIY project) based on Arduino Nano. For $48 or less. (c) Copyright Robert Brown 2014-2018. All Rights Reserved. YOU MAY NOT SELL CONTROLLERS OR PCB's BASED ON THIS PROJECT to anyone without express written permission granted from the author. Schematics, Code, Firmware, Ideas, Applications, Layout are protected by International Copyright Law. Permission is NOT granted to any person to redistribute, market, manufacture or sell the myDewController products, ideas, PCB's, circuits, builds, variations and units described or discussed herein or on this site. Permission is granted for personal and Academic use only. THIS MEANS THAT YOU CANNOT RE-DESIGN AND MAKE AVAILABLE KITS OR PCB BASED ON THIS PROJECT AND OFFER THOSE KITS FOR SALE TO OTHERS. THAT IS A BREACH OF COPYRIGHT. Code or portions of code may not be copied or used without appropriate credit given to author.
mySQM powered by Arduino Nano
A sky quality meter based on TLS237 and Arduino Nano. (c) Copyright Robert Brown 2014-2018. All Rights Reserved. YOU MAY NOT SELL CONTROLLERS OR PCB's BASED ON THIS PROJECT to anyone without express written permission granted from the author. Schematics, Code, Firmware, Ideas, Applications, Layout are protected by International Copyright Law. Permission is NOT granted to any person to redistribute, market, manufacture or sell the mySQM products, ideas, PCB's, circuits, builds, variations and units described or discussed herein or on this site. Permission is granted for personal and Academic use only. THIS MEANS THAT YOU CANNOT RE-DESIGN AND MAKE AVAILABLE KITS OR PCB BASED ON THIS PROJECT AND OFFER THOSE KITS FOR SALE TO OTHERS. THAT IS A BREACH OF COPYRIGHT. Code or portions of code may not be copied or used without appropriate credit given to author.
AudiculaPi - the tiny media server for your Raspberry Pi
AudiculaPi - the tiny media / home automation server for your Raspberry Pi 1-2B+ based on OpenWrt/ Chaos Calmer (without RPI3 support) * Minimalistic system, installed and running on a just 256MB sized SD card * AudiculaPi provides a detailed Web Browser GUI with multi language support Already preinstalled: * Homeautomation with Domoticz (http://www.domoticz.com) Tested with HW: RFXtrx433E USB 433.92MHz Transceiver by RFXCom and Z-Wave Plus USB Stick ZME_UZB1 by Z-Wave.me * MPD, Musi Player Daemon - Internet Radio / MP3 /OGG / FLAC etc. player (with LCD support based on PyDPF) * pianod * SAMBA * SSH/SFTP Server * MiniDLNA * Shairport * Avahi * OpenVPN * WebCAM Video Streaming with mjpeg-streamer * NTP client / server * WLAN client and / or access point * ... countless other gadgets, use web based packet manager powered by OpenWrt repository !
Home and industrial automation with Power Line Comunication
In this project i want to create a simple layer, this layer help the people to create a home or industrial automation with Power Line Communication. I use the chip ST7580, in particular i use the evaluetion kit: EVALKITST7580-1 for my test
This is a Dynamic C port of the BACnet stack at http://sourceforge.net/projects/bacnet. This BACnet library provides a BACnet application layer, network layer and MAC layer communications services for systems based on the Rabbit family of processor.
Router distribution based on FreeBSD with FFRouting and Bird
BSD Router Project (BSDRP) is a open source router distribution based on FreeBSD, supporting all majors routing protocols (RIP, OSPF, BGP, ISIS, PIM, etc..) and multi-tenant capabilities that fit on a 1GB Flash disk.
Turns the BeagleBone Black into a Nintendo-based retrogaming console.
The Beagle Entertainment System (BES) project is a complete filesystem image that turns the ARM-based BeagleBone Black single board computer into an embedded appliance capable of playing software for the SNES, NES, GBA, and Gameboy Color platforms. A full system image, ready to be written to a microSD card and used as-is, is available for download. Just connect your BES-enabled BeagleBone Black to your network and you can use BES's Node.js web interface to add or remove ROMs, configure gamepads, and edit ROM descriptions for the front-end GUI. There's no need to hand edit configuration files or manually copy ROM files onto the microSD card! BES source: https://github.com/hendersa/bes BES web interface: https://github.com/hendersa/bes-config-node BES kernel device tree: https://github.com/hendersa/bes-dtb-rebuilder
Tiny Linux distribution for embedded and virtual network appliances
A tiny embedded Linux distribution forked from LEDE (https://www.lede-project.org) which in turn is forked from OpenWrt (http://openwrt.org). This project is aimed at routers with at least 8-16 MB flash and 128+ MB RAM. Exploration is being made for OpenEmbedded/Yocto for larger devices in a new project. In the interim the follow targets are also supported: 2) Minimalist virtualization/container hosts (only on x86/ARM at the moment for hypervisor, any for container). 3) Minimalist virtual machine guests (x86/ARM only at the moment). Note that distro is cross-compiled and not yet self-hosting. This project is mainly a staging for things we're testing before upstreaming.
ChibiOS/RT is a free and efficient RTOS designed for deeply embedded applications. It offers a comprehensive set of kernel primitives and supports many architectures: ARM7, Cortex-M0, Cortex-M3, Cortex-M4, PowerPC e200z, STM8, AVR, MSP430, ColdFire, H8S, x86.
Guide on porting Contiki to new hardware platforms + extensive Contiki OS port for the Semtech LoRaMote platform (STM32L1). The STM32L1XX Standard Peripherals Library and LoRaMac project were used to implement the microcontroller's components, radio transceiver and sensors. Tested with Contiki 2.6 and Contiki 3. https://github.com/contiki-os/contiki https://github.com/Lora-net/LoRaMac-node http://www.st.com/content/st_com/en/products/embedded-software/mcus-embedded-software/stm32-embedded-software/stm32-standard-peripheral-libraries/stsw-stm32077.html
Cryptic Allusion Dreamcast-related development: KallistiOS, Ghetto Pong, etc.
DMX Library and usage examples for Arduino
This Library includes a DMX Master, DMX Slave and various examples on how to use its implementation. This projects has been started to support the use of our Shielded DMX / RDM Shield for Arduino. The library is made available under the GNU Lesser General Public License If you would like to make contributions to the source code feel free to contact the project admin
Debian for WDTV Live (running WDLXTV) - Inc. Build Essentials
Back in 2010, b-rad released Debian Squeeze (MIPSEL) for a WDLXTV hacked WDTV: http://forum.wdlxtv.com/viewtopic.php?f=43&t=494&start=0 I've placed a copy on SourceForge with the script to chroot the image on a hacked WDTV Live (WDLXTV). Since then, Squeeze is no longer supported, so Debian moved the source repo's. The original "/etc/apt/sources.list" file needs to be changed: deb http://archive.debian.org/debian-archive/debian/ squeeze main contrib non-free deb-src http://archive.debian.org/debian-archive/debian/ squeeze main contrib non-free You can then install Squeeze packages: eg: apt-get update apt-get install debian-archive-keyring apt-get install build-essential Which gives you a basic GCC environment. I applied the above on the original squeeze image, which may make it easier to get a working system, or, just make your own: The original Debian image is also here: http://files.wdlxtv.de/debian-squeeze.img.tgz
Modular CNC software for Arduino controller
The goal of the project is the realization of a modular firmware that allows to control a CNC machine with different utensils. For instance, a CNC with a drill, with few changes can become a plotter with a pen or cutting machine to cut cardboard or stickers. In order to do that, we want project a CNC router with a mechanism that allows a fast utensil change and a controlling firmware which can use different utensils changing some configuration parameters.
Python Library for accessing UEFI BIOS internal function by protocol
EfiPy is a Python Module on UEFI shell which can access UEFI BIOS kernel interface - System Table - Runtime Services - Boot Services pAnalyzer package - Tracing UEFI protocol calling flow Output protocol flow to screen or file with XML format CorePy (assembly package) - Simple Assembly code in Python environment. EfiPy Shell package- Simple uefi shell program coded with EfiPy library to prove EfiPy workable EfiPy leverage these open source packages - ctypes, CorePy. Samples https://sourceforge.net/u/efipy/svn/HEAD/tree/Trunk/ EfiPy Author: https://www.facebook.com/wu.max.39
Biblioteca para sistema embarcados nas arquiteturas 8051, PIC, MSP430 e ARM. A arquitetura de cada microcontrador esta dividida em quatro camadas, para um melhor entendimento do codigo e visando futuras manutencoes.
Allows executing code on MIPS32 EmbeddedLinux devices (WLAN routers)
This tool is used to develop small applications that can run on MIPS-based embedded Linux devices - mainly WLAN routers. It is possible to debug these applications using GDB with the GDB backend provided by this tool.
Open Source SW/HW Project for Embedded Ethernet Applications. Works with AVR ATmega256/128/103, AVR32, SAM7X, SAM7S(E), SAM9, AT91X40, GameBoy Advance, Cortex M3 / M4 (STM32, NXP LPC, LM3S), Freescale Coldfire, RTL8019AS, LAN91C111, CS8900 and DM9000E chips. Offers a tiny TCP/IP stack including HTTP, FTP and DHCP.
FlashForth is a standalone Forth system for the Microchip PIC 18, 24, 30, 33 and the Atmel Atmega series of microcontrollers. A Forth system with interpreter, compiler, assembler and multitasker is provided.
This Project combines several small Projects on AVR Base. Each Project has its own SVR archieve.