A Windows tool for writing images to USB sticks or SD/CF cards
This program is designed to write a raw disk image to a removable device or backup a removable device to a raw image file. It is very useful for embedded development, namely Arm development projects (Android, Ubuntu on Arm, etc). Anyone is free to branch and modify this program. Patches are always welcome. This release is for Windows 7/8.1/10. It will should also work on Windows Server 2008/2012/2016 (although not tested by the developmers). For Windows XP/Vista, please use v0.9 (in the files archive). Warning: Issues have been reported when using to write to USB Floppy drives (and occasionally other USB devices, although very rare). While this has been fixed in v1.0, it is highly recommended that before an image is written to a device, the user should do a Read to a temporary file first. If this fails, please report the failure along with your system information. Known issues: Currently, the program will crash if you are using a Ramdisk. This is being debugged.
Debugging and programming interfaces for Freescale microcontroller
USBDM BDM Interface for Freescale Microcontrollers USBDM consists of two components: Hardware interfaces for various target devices This includes interfaces ranging from very simple hardware to more complete and capable hardware. Software to support these interfaces This includes: Plugins to work with Freescale's Codewarrior software under Windows Plugins to extend the usabilty of Eclipse with USBDM and Codesourcery & ARM toolchains. This includes GDB sprites providing a complete open source development toolchain. A set of stand-alone programmer applications. These support programming of RS08, HCS08, HCS12, Coldfire and Kinetis devices. Where applicable, the software is available for Windows and Linux. Keywords: BDM, OpenSDA, Peripheral Register View, Freescale, Debugger, Programmer, ARM Cortex-M, USBDM, OSBDM, TBDML, Eclipse plugin, SVD Viewer, Register View, Kinetis, Coldfire,HCS08,HCS12,GDB,Kinetis Design Studio, Eclipse
AudiculaPi - the tiny media server for your Raspberry Pi
AudiculaPi - the tiny media / home automation server for your Raspberry Pi 1-2B+ based on OpenWrt/ Chaos Calmer (without RPI3 support) * Minimalistic system, installed and running on a just 256MB sized SD card * AudiculaPi provides a detailed Web Browser GUI with multi language support Already preinstalled: * Homeautomation with Domoticz (http://www.domoticz.com) Tested with HW: RFXtrx433E USB 433.92MHz Transceiver by RFXCom and Z-Wave Plus USB Stick ZME_UZB1 by Z-Wave.me * MPD, Musi Player Daemon - Internet Radio / MP3 /OGG / FLAC etc. player (with LCD support based on PyDPF) * pianod * SAMBA * SSH/SFTP Server * MiniDLNA * Shairport * Avahi * OpenVPN * WebCAM Video Streaming with mjpeg-streamer * NTP client / server * WLAN client and / or access point * ... countless other gadgets, use web based packet manager powered by OpenWrt repository !
Scientific/engineering firmware repurposing HP business calculators!
This project has created scientific firmware for the HP-20b and HP-30b business calculators. The WP 34S turns either of these calculators into a powerful keystroke programmable scientific device. According to our customers, it's the most powerful and fastest RPN scientific pocket calculator ever built. The WP 34S is alive and stable since 2011. We have succeeded in satisfying the most picky users - read about their experiences on http://www.hpmuseum.org/forum/forum-8.html. Find the Owner's Manual v3.2 at https://www.createspace.com/4106229 In 2014, we've updated the WP 34S to version 3.3. Our customers confirm its documentation is excellent and comprehensive (see feedback); an updated printed edition is available from https://www.createspace.com/6329314 since June 2016. We have also produced the WP 31S which is derived from the WP 34S source code. This is an entry-level scientific calculator. Its printed manual is available from https://www.createspace.com/4773370
Open source flash program for STM32 using the ST serial bootloader
Open source cross platform flash program for the STM32 ARM microcontrollers using the built-in ST serial bootloader over UART or I2C
Raspberry PI minimal linux distribution
Moebius Linux is a Raspberry PI armhf distribution built from scratch and targeted to have a small footprint. 20Mb of RAM (with ssh) and a 128Mb SD are minimum requirements. Size, speed and optimizations are main goals for this distro, take a look at it and contribute if you like it
Open Source SW/HW Project for Embedded Ethernet Applications. Works with AVR ATmega256/128/103, AVR32, SAM7X, SAM7S(E), SAM9, AT91X40, GameBoy Advance, Cortex M3 / M4 (STM32, NXP LPC, LM3S), Freescale Coldfire, RTL8019AS, LAN91C111, CS8900 and DM9000E chips. Offers a tiny TCP/IP stack including HTTP, FTP and DHCP.
Administration Remote Desktop Service - TSAdmin
Remote Desktop Service - User Profile Disks - TSAdmin Administration des terminaux légers dans un environnement RDS. Galinette cendrée est un outil destiné aux administrateurs d’architecture RDS Terminal Server. Sa fonction première est de gérer les sessions RDP/TSE des utilisateurs via une interface simple. Il permet de remplacer « TSAdmin » ou le « Gestionnaire de service de bureaux à distance ». - Gestion des sessions RDP pour un serveur Broker (Bureau à distance et Remote App) - Gestion profils VHD et VHDX pour un partage UPD. - Prise de contrôle via le mode Shadow Session - Prise de contrôle via un logiciel tiers installé sur le terminal (VNC…) - Intégration avec Active Directory - Interrogation LDAP des utilisateurs AD - Interrogation WMI du terminal - Gestion des processus pour un utilisateur - Envoyer des messages pour un serveur ou un utilisateur Galinette Password : Module de décryptage de mot de passe Thunderbird et Firefox
Multiplatform USB DFU host utility
dfu-util is a host side implementation of the DFU 1.0 and DFU 1.1 specifications of the USB forum. DFU is intended to download and upload firmware to/from devices connected over USB.
Dew Controller Feature Rich
3-channel fully automated Dew Controller (DIY project) based on Arduino Nano. For $48 or less. (c) Copyright Robert Brown 2014-2018. All Rights Reserved. YOU MAY NOT SELL CONTROLLERS OR PCB's BASED ON THIS PROJECT to anyone without express written permission granted from the author. Schematics, Code, Firmware, Ideas, Applications, Layout are protected by International Copyright Law. Permission is NOT granted to any person to redistribute, market, manufacture or sell the myDewController products, ideas, PCB's, circuits, builds, variations and units described or discussed herein or on this site. Permission is granted for personal and Academic use only. THIS MEANS THAT YOU CANNOT RE-DESIGN AND MAKE AVAILABLE KITS OR PCB BASED ON THIS PROJECT AND OFFER THOSE KITS FOR SALE TO OTHERS. THAT IS A BREACH OF COPYRIGHT. Code or portions of code may not be copied or used without appropriate credit given to author.
FlashForth is a standalone Forth system for the Microchip PIC 18, 24, 30, 33 and the Atmel Atmega series of microcontrollers. A Forth system with interpreter, compiler, assembler and multitasker is provided.
Router distribution based on FreeBSD with FFRouting and Bird
BSD Router Project (BSDRP) is a open source router distribution based on FreeBSD, supporting all majors routing protocols (RIP, OSPF, BGP, ISIS, PIM, etc..) and multi-tenant capabilities that fit on a 1GB Flash disk.
W-Bus communication library
This is a small library that allows comunicating with a Webasto (tm) W-Bus capable car heating system. Runs on Personal Computers or for embedded devices (slim design). Easily portable. Includes a Heater manager, heater controller program and more. The GIT repository (CVS is deprecated) also includes a control unit application to control W-Bus capable devices, a W-Bus compatible heater unit firmware application and a heater simulator for testing purposes. Also, a serial port loop back driver for linux is included to simulate OBD II K-Line adapters.
Bootloader for STM32, XMC, HCS12 and other microcontroller targets.
OpenBLT is mostly used as an STM32 bootloader, due to the popularity of STM32 microcontrollers. However, the bootloader’s architecture is such that it can work with any microcontroller and use any type of communication interface to perform firmware updates.
freeRTOS for Arduino Uno, Goldilocks 1284p & Mega 2560
AVR ATmega port of freeRTOS A port of freeRTOS which can be flexibly flexibly configured use almost any available Timer on AVR ATmega devices and will operate with almost any classic Arduino device from Arduino, SeeedStudio, Sparkfun, Freetronics or Pololu. Going forward this repository will be updated less often and only with major releases. Please check at Github for the latest commits. https://github.com/feilipu/avrfreertos The Goldilocks Analogue story is told here. http://feilipu.me/?s=Goldilocks+Analogue The Goldilocks 1284p story is here. http://feilipu.me/2013/03/08/goldilocks-1284p-arduino-uno-clone/ If this repository is too complicated to get started, a minimum AVR freeRTOS configured using the Watchdog Timer and Heap 3 is also also available. https://github.com/feilipu/miniAVRfreeRTOS For the Arduino platform there is a freeRTOS Library available in the Arduino IDE Library manager. https://github.com/feilipu/Arduino_FreeRTOS_Library
Cryptic Allusion Dreamcast-related development: KallistiOS, Ghetto Pong, etc.
"µOS++" (micro OS plus plus) is an open source, royalty-free, real-time operating system intended for embedded systems built around ARM Cortex M or AVR devices. It is based on a preemptive scheduler written in C++ (more info in the Wiki).
Alternative firmware and software with open source for platforms based on the SoC Realtek RTL8186. Альтернативная прошивка и ПО с открытым кодом для платформ на базе SoC Realtek RTL8186.
RTOS for Secure Systems
Pharos is a Real-Time Operating System designed for Secure Systems with the following characteristics: -Security: With space partitions and enhanced time partitioning. Each partition protected with hardware MMU/MPU and operating in user mode. -Quality: Low cyclomatic, high comments, low nesting level, MISRA. -Mixed Criticality: Partition independence and isolation. Native support for sporadic, periodic and aperiodic threads under a fixed-priority preemptive scheduler, including execution time protection (threads are not allowed to run for more time than they are configured to). -Determinism: Hard real-time determinism, most calls areO(1) and very few cases are O(Log(N)) - they are well indentified in the user manual. Pharos takes ARINC and moves it one step further, improving responsiveness and isolation. Supports ARM R5, M4, 926EJ-S. We are a group of enthusiastic software developers that also implements client custom software. Contact: email@example.com
State machine framework for reactive embedded systems
RKH is a generic, flexible, modular, highly portable, ANSI-C compliant, and open-source development tool for implementing hierarchical state machines based on modern state machine concepts. This modern techniques are used to give an abstract description of the dynamic behavior of a system in a substantial manner. The RKH not implements neither entire UML specs. nor entire Statechart specs. Instead, the RKH intention is to support just enough basic concepts of that powerful tools to facilitate the reactive-system modeling holding a solid, and efficient implementation. Broadly speaking, the RKH implementation has been designed from the ground up to be used in 8-bits platforms but can be easily adapted to 16 or 32-bits platforms.
amforth is an extendible interpreter on microcontrollers
amforth is an extendable command interpreter running on AVR ATmega and TI MSP430 microcontrollers. Turnkey actions for fully autonomous operations are possible as well. The command language is close to the Forth 2012 standard.
Use Your favorite input method to play on PlayStation 4 and Xbox One
The goal of this project is to provide compact embedded systems with Game Input MultipleXer preinstalled. Currently supported platforms: Orangepi Zero, Raspberry Pi 0-3, x86. GIMX is an open source solution that allows using alternative input methods on most of modern gaming consoles like PlayStation 4, Xbox One, PlayStation 3, Xbox 360. Beside the software it requires to assemble DIY adapter from off the shelf parts to emulate original controllers and translate the input from serial port. Little or even no soldering required. With minimal knowledge one can build an advanced standalone alternative to comercial input mulitplexers for approximately 30$ at home. Complied GIMX binares can be found here: https://gimx.fr/wiki/index.php?title=Installation Project source code is availabe in Matlo's GitHub: https://github.com/matlo/GIMX
ext2/3/4 library for microcontrollers
The main goal of the lwext4 project is to provide ext2/3/4 filesystem for microcontrollers. It may be an interesting alternative for traditional MCU filesystem libraries (mostly based on FAT32). Lwext4 may be used with SD/MMC card, USB flash drive or other block based memory device. However it is not good for flash memory–based storage devices. Code is also available on github: https://github.com/gkostka/lwext4 Feel free to contact me: firstname.lastname@example.org
opkg for cmu mazda infotainment
This is only repository binary file. If you interest, visit the website https://gitlab.com/mzdonline/cmu-opkg. For developer to activate package management system on CMU. Developer can easy to build own package .Look at Makefile and opkg/*
A GUI system for embedded systems.
A small GUI system for monochrome LCDs suitable for embedded systems with very limited system resources (like 8 bit microcontrollers). Comes with a graphical editor for creating a menu. Runs on Linux and Windows ( cygwin is recommend for using all features).