To be a practical Arduino simulator
ArduSim provides API level simulation of an Arduino. Arduino sketches can be run and debugged on PC with no modification. ArduGate is a sub-project of ArduSim. The agent sketch is shared.
A system for programming LPC, STM32 and possible others devices.
This project provides three different interfaces for programming embedded chips: a GObject based library (for developers), an executable binary (for computer geeks) and a GTK+3 front-end (for less geeky users). Actually NXP LPC and STM32 based chips are supported.
Program NXP P89V51RD2 from your favorite Unix system
P89 Serial Programmer (p89pgm) is a simple command-line based serial In-System Programmer for Philips (NXP) P89V51RD2 microcontroller. This programmer is designed to be minimal, and has no external software dependency. Supported input formats are Intel HEX and raw binary file. This programmer is designed for GNU/Linux and Unix-like platforms; but it also runs on Microsoft Windows as well, thanks to Cygwin porting library.
A panel heavily based on the GTK+2 stack
A bleeding edge GTK+2 panel that does not reinvent the wheel: the primary target is to provide a panel that reuses whatever available (if not overkilling) in the obvious way. All the dependencies apart GTK+ are (and hopefully will be) optionals.
a linux based readonly image as appliance
Visit also: https://github.com/Anthilla/AnthillaOS For more updated Informations. Usable as test/dev exercise for appliances An x86 64bit gentoo image customized for readonly usage as appliances, fully functional and complete of more than 1000 pkg based on a gentoo+systemd distro. Hypervisor (kvm or xen) Storage (ZFS and Gluster) Container (Docker) Networking (iproute2, nftable, OpenVSwitch, Bird) Antd (http://www.anthilla.com/en/software/antd/ ) web based management all open source components from other projects are released under respective licenses, all parts, files,subprojects developed as part or this project are released under the BSD 3 clause license.
This is a simple command line tool to customize CP2103 USB to UART bridge controllers in home-grown hardware. VID, PID, product name string, serial number string, and release version of the device can be changed next to GPIO port modes.
A simple armv7h sdk
This is my sdk for usage with slackware on A20 devices like bananapi, cubietruck and olimex-som. For more info see https://github.com/tjohann/a20_sdk .
FAMOUSO is an event-based publish/subscribe middleware written in C++ for systems ranging from 8Bit micro-controllers up to 32Bit PC/Workstations.
A minimistic Linux window manager with css style config
Our take on a basic window manager for Linux which adheres to the philosophy of "do one thing and do it well." As a result, this window manager only manages windows and does not provide any supervision at all. Instead it relies on another program, such as wbar or web.de, to actually provide that functionality. And in order to keep administration to a minimum, there is only one config file that can be manipulated to change the appearance of the window chrome using css styled syntax.
Debug Facility for Real-Time issues
For C (and CPP obviously): Include a fast and tiny RAM-tracing feature for Real-Time (RT) debugging purposes. >> ONLY FOR DEBUGGING << Very much faster than printf-debugging, which may result in unforseen results in an RT environement.
Helixis is a framework that allows the creation of application software for all types of equipment (PC, Pocket PC, Smartphone, mobile phone, etc..). It is scalable and is ideal for video games and embedded applications in general.
Monitor and control your home and several energy sources
The motivation of this project is to monitor and control several energy-sources like wind generators or solar panels. It will develop to a full and low-cost smarthome-solution, but for now we started to capture the weather as a basis to calculate the efficiency of the energy-sources. The client-server architecture consists of several clients (ie. the weather-station, a station to measure the power consumption, the charge controller, rgb-controller for the lights, shutter controller, etc.) and the server, which is connected to a remote database and will be visualized/controlled on desktop computers, tablets and/or smartphones. The project is based on the current version of the qt classlibrary (v5.4) and qtcreator as the ide!
Streams data from 3D cameras over a network.
This is an application that streams data from the Microsoft Kinect or cameras like it over a network. The program is Intended to be used in robotics applications where the controller cannot use such cameras directly due to hardware/software limitations--such as lacking usb ports or appropriate drivers--or in situations where the camera is not in close proximity to the device that needs to access it. Given that the controller can accept data from over the network, another embedded controller that is able to use these kinds of cameras can be loaded with this software to send the image and depth data from the kinect over the network to the other controller. Currently, KinectStreamer can only use the libfreenect library as its driver. Support for the OpenNI driver should be rolling out soon. As well as a C++ client to the KinectStreamer server. Designed by Frans Elliott.
Appliance Distribution, Supports USB/Compact Flash devices, Provides a read-only-root filesystem, No need to fsck OS partitions, Appliance State held in dedicated CFG partition, Active/Standby partition design, Simple update/test/rollback
BASIC interpreter for the 16bit PIC microcontroller 24FJ64GA002. The interpreter runs on the chip only, no compiler/tokenizer is needed. Communication with PC is done by USB-to-serial converter cable.
The definitive DASH7 firmware project
OpenTag is a full-featured communications stack for DASH7 Mode 2 (ISO 18000-7.4). It is intended to run on embedded HW, especially RF SoCs, but it can be ported to almost anything. OpenTag's main feat is its large featureset, but small footprint. Also see the official OpenTag website: http://www.indigresso.com/wiki/doku.php
A realtime-schedule generator for educational purposes
RT Schedule is a realtime-schedule generator to create and present simple and idealised RT schedules from task lists. The purpose is to compute the basic properties of a task set and create a schedule using the rate monotonic (RM), earliest deadline first (EDF) and least laxity first (LLF) algorithms. The program uses simple, idealised systems, since students must be able to schedule them manually. RT Schedule computes the data and generates clear graphs for lecture notes and exams.
Scheduler for reconfigurable hardware
SC-REX stands for "SCheduler for REconfigurable devices on linuX". It is a scheduler for heterogeneous multicore platforms where some cores can be dynamically reconfigured at run-time (e.g., VLIWs processors that can change issue width).
Set recovery mode IP and flash firmware to ASUS WL-500gP router
SUSFinder is a utility to assign IP address and flash firmware to ASUS WL-500G Premium router booted in recovery mode on local network, in the case that you didn't know router's IP address settings beforehand. This utility do essentially the same thing as ASUS Firmware Restoration Utility, except that it relies on the external 'atftp' program to do the TFTP firmware flashing part. Currently, SUSFinder is written in ANSI C with POSIX API, thus should be portable to most Unix-like platform (including Cygwin).
X-RT: A portable multiprocessor real-time scheduling framework
This project contains the material discussed in my PhD dissertation, entitled "Hardware/Software Design of Dynamic Real-Time Schedulers for Embedded Multiprocessor Systems." The source code is available in the SVN repository: https://sourceforge.net/p/xrt/code/6/tree/trunk/ and consists in two folders: 1) /X-RT : A portable multiprocessor scheduling framework supporting scheduling periodic real-time tasks according to the G-EDF (Global Earliest Deadline First) scheduling platform. Current version supports major POSIX systems (Linux, QNX). 2) Hardware_GEDF_Scheduler: is a hardware implementation in VHDL (targeting FPGAs) of the G-EDF multiprocessor scheduling policy.
Visualization of ZigbeeNET API Data Packets in LINUX Implemented a My-SQL database based visualization interface in Linux for ZigbeeNET API Applications
A free/libre/open-source firmware library (previously known as libopenstm32) for various ARM Cortex-M3 microcontrollers, including ST STM32, Toshiba TX03, Atmel SAM3U, NXP LPC1000 and others. Sourcecode and bugtracker can be found at http://github.com/libopencm3
serial logging tool with time stamps and hotkey and automation support
a flexible serial logging tool, runs on GNU/Linux, which can be useful for timing analysis and logging capture of embedded system development.