Search Results for "pwm"

...If the release version (i.e., the master branch) exhibits unexpected behaviour for your device and configuration, you should upgrade to the latest development version instead to see if your problem is resolved as some bugs in previous releases or development builds may already have been resolved. Single binary firmware. Support for TuyaMCU. Increase PWM channels to 16. Initial support for ESP32S3 with support for 38 configurable GPIOs.

ChibiOS/RT is a free and efficient RTOS designed for deeply embedded applications. It offers a comprehensive set of kernel primitives and supports many architectures: ARM7, Cortex-M0, Cortex-M3, Cortex-M4, PowerPC e200z, STM8, AVR, MSP430, ColdFire, H8S, x86.

The WiRe project seeks to provide android smartphones with universal Infrared (IR) television remote control functionality. The limitations/scope of this project include: 1. Android application will be restricted to a minimum Android Operating Sytem of Android 4.2.2 2. Data communications will be conducted over a Wi-Fi network 3. The embedded device will be built utilizing the Beaglebone Black as its core 4. The Final product will be capable of conducting common television controls

serialLCD is Arduino based open-source project. It contains ATmega8 with given firmware file & the arduino library. The ATmega8 can be replaced by ATmega168/328. ATmega8 uses its 8MHz internal oscillator to reduce hardware (atmega8 no-xtal bootloader is used). The arduino library uses SoftwareSerial internally to communicate ATmega8 via digital pin 6 (only for uno/duemilanove or clone with atmega8/168/328, not for mega & due). Only one wire simplex serial communication at baudrate 9600 is...

...And it will, if implemented, support more then 10 kinds of target chips, provide drivers for more than 100 pheripherial chips, provide generic software stacks(including USB, Wifi...), provide an featured FSM system(with semaphore, mutex support). Versaloon is also a USB dongle providing JTAG, SWD, SPI, IIC, GPIO, PWM, MicroWire, USART, EBI and so on.

A simple Embedded System Framework that allows rapid development of applications build for AVR family. System is based on a super-loop architecture with check and skip (no-wait) flag event driver system. Supports: UART, SysTick Timer, ADC, SPI, EEPROM, PWM. Also supports: Xilinx FPGA configuration, FPGA SSI interface, smart card reader etc. Tested partially (different modules in each case) on ATMega163/16/32/323/8. Awards CodeProject 2010, Third Prize, Hardware and Device Programming Check the Wiki Page for more details.

lib-lpc2k is an open-source hardware library in C for the LPC2000 series microprocessors from NXP. It allows access to onboard peripherals (e.g. GPIO, UARTs, I2C, ADC, timers, PWM), and also offers project templates for Eclipse and other environments.