Search Results for "device"

ChibiOS/RT is a free and efficient RTOS designed for deeply embedded applications. It offers a comprehensive set of kernel primitives and supports many architectures: ARM7, Cortex-M0, Cortex-M3, Cortex-M4, PowerPC e200z, STM8, AVR, MSP430, ColdFire, H8S, x86.

...MINIMON features all commands usually expected from a debugger/monitor: Memory dump and edit, Register dump and edit, Execute code from monitor, Direct Assembler and Disassembler (all documented opcodes of the NMOS 6502), Transfer/Compare/Fill/Hunt in memory blocks, Use of breakpoints with the BRK instruction, Load/Save/Verify with any storage device. The cartridge hardware expands upon the firmware features by supplying a de-multiplexer for the $9800..$9FFF I/Ox area (where the firmware is located per default) and a versatile reset button (with autostart inhibit for secondary cartridges). Size: only 2048 Bytes. Start with SYS 38912 Read 'instructions.12.txt' for further info.

A simple to use serial communication software for communicating with other serial, MCU and Arduino. The SoftIB Serial Communicator communicates with other Serial devices that use a simple asynchronous communication using only the RX and TX signals without any control signals. The application was developed based on the communication with microcontrollers, but it can be used in all other cases.

...XMHF advocates a "rich" single-guest execution model where the hypervisor framework supports only a single-guest and allows the guest direct access to all performance-critical system devices and device interrupts. XMHF currently runs on recent multicore x86 hardware virtualized platforms with support for dynamic root of trust and nested (2-dimensional) paging. The framework is capable of running unmodified legacy multiprocessor capable OSes such as Windows and Linux. Documentation available at: http://xmhf.sourceforge.net/doc

THE SOURCES HAS BEEN MOVED TO GITHUB https://github.com/josefpavlik/picoforth PicoForth is Forth compiler for PIC12 and PIC16 families. It is written in gForth and requires gpUtils. Produces hex file ready to be programmed into the device.

This project covers the development of 3rd-party tools for the "Wilson S1MP3 Player", some chinese device manufactured by Actions, with very low customer support. Generally you will find here development tools to access and alter the device firmware.

This project contains test software and tutorials for Analog Devices' Blackfin DSP device drivers and system services. See the wiki (in the menu bar above) for more info.

This is the development site for frame buffer video drivers and video subsystem for Linux.

the goal of this project is to build a stack for Lonworks Protocol and device working on this protocol