Search Results for "wireless"

SystemC Network Simulation Library (SCNSL) is an extension of SystemC to allow modelling packet-based networks such as wireless networks, ethernet, fieldbus, etc. As done by basic SystemC for signals on the bus, SCNSL provides primitives to model packet trasmission, reception, contention on the channel and wireless path loss. The use of SCNSL allows the easy and complete modelling of distributed applications of networked embedded systems such as wireless sensor networks, routers, and distributed plant controllers. ...

This project aims to provide the wireless support in OverSim to simulate the P2P protocol over Mobile AdHoc Network or Wireless Mesh Network. Our project include the INETMANET-2.0 open source library to facilitate wireless characteristics.

...Network behavior in terms of wireless channel models are provided by the PAWiS and the MiXiM framework. STEAM-Sim is an extension to the PAWiS and MiXiM framework. The underlying simulator is OMNeT++. Please see the corresponding documentation. I also ported the Contiki v2.6 operating system to STEAM-Sim, thus it is possible to run Contiki-based code in the simulation.

The project page provides the source code of custom built simulators used in our publications whose URL are given as follow: http://dx.doi.org/10.1016/j.comcom.2013.09.006 http://dx.doi.org/10.1109/PIMRC.2009.5449983 The titles of the papers are: Online XOR packet coding: Efficient single-hop wireless multicasting with low decoding delay (COMCOM VERSION). An efficient network coding based retransmission algorithm for wireless multicast (PIMRC VERSION). Help (README) files are included in the .zip files. The project will no longer be updated.

This project presents an extension to ns-2, which enables a normal user, who has basic knowledge of ns-2, to simulate localization system within a wireless network. Moreover, this project would be beneficial to researchers who want to implement new or existing localisation algorithms and anyone new to ns-2 who wish to know more about how a simulation project is built and structured. [1],[2] provide more details. References [1] A. M. Abu-Mahfouz and G. P. Hancke, GP., “ns-2 extension to simulate localization system in wireless sensor networks,” In Proceedings of the IEEE Africon 2011 conference, 13-15 September , Livingstone, Zambia, 2011, pp. 01-07...

MiXiM is a simulator for wireless and mobile networks using the OMNeT++ simulation engine.

The introduction of physical layer network coding gives rise to the concept of turning a collision of transmissions on a wireless channel useful. In the idea of physical layer network coding, two synchronized simultaneous packet transmissions are carefully encoded such that the superimposed transmission can be decoded to produce a packet which is identical to the bitwise binary sum of the two transmitted packets. This paper explores the decoding of superimposed transmission resulted by multiple synchronized simultaneous transmissions. ...

In this paper we propose a Joint Network Coding based Cooperative Retransmission (JNC- CR) scheme, where we show that ANC along with DNC can offer a much higher retransmission gain than that attainable through either ANC, DNC or Automatic Repeat reQuest (ARQ) based retransmission.

Ns is a discrete event simulator targeted at networking research. Ns provides substantial support for simulation of TCP, routing, and multicast protocols over wired and wireless (local and satellite) networks.

The OMNI library is a set of useful tools, which helps you to simulate various wireless telecommunication systems.

Shawn is a discrete event simulator for large wireless sensor networks. It does not compete with others well-known simulators by simulating individual ISO layers and the protocols within these layers. Shawn emerged from a more algorithmic approach. THE PROJECT HAS BEEN MIGRATED TO GITHUB: https://github.com/itm/shawn

AWNetS(Aibear Wireless Network Simulator)is a C++ written,fire-new discrete-event wireless network simulator which integrates network and communication simulations.It also focuses on various kinds of wireless networks including satellite and HAP.

Wireless LAN (IEEE 802.11) power management extension based on ns-2.33. This supports legacy power save functions defined with IEEE 802.11.

Simulation framework for power aware Wireless Sensor and Actor Network nodes to model all layers of the communication system, the application, the power supply and energy management, the digital processing unit and the sensor-actuator interface.

DSR-UU is an implementation of the Dynamic Source Routing protocol that runs in the Linux kernel or in the ns-2 network simulator. It was originally created at Uppsala University, hence the UU.

N-sim is a framework for studying and developing wireless sensor networks. It emulates the computation of sensor platforms, simulates the wireless communications, and allows plug-in models for source detection simulation. Intended for cluster computing.

This program reads the output traces of MITSIMLab and converts them into a format which can be read and visualized by Ns 2.