Search Results for "serial interface to arduino"

NEW V3 version with RTC and buzzer (require V3+ ECG Logger Viewer application) The ECG Logger project is a Wearable Cardio Monitor for Long-Term (up to 24h) ECG Data Acquisition and Analysis (aka Holter) with an ECG live (real-time) mode. This project provides a very low-cost open-source "Hardware and Software" for a Cardiac Rhythmic Holter. The hardware has been made very simple and is based on an Arduino Nano micro-controller with boards for SD card mass-storage, instrumentation...

The C-GM Counter is a low cost (<50$) DIY Hardware & Firmware for building a Connected Geiger-Müller counter device to record beta-gamma radiation levels. The counter is the hardware part of the overall A-GM project aimed for providing a long-term continuous measurement of the radioactivity level. see also A-GM Manager at https://www.instructables.com/id/DIY-Radioactivity-Counter-IoT-and-Eco-system/ ** IMPORTANT ** : From v1.4, Arduino Nano require Optiboot bootloader to work, other...

...The aim of this project is to provide an replacement of the original xplgraph.scr library, exposing roughly the same API, enabling graphics in DXForth running under CP/M. This library is written using DXForth's inline assembly (with all of its cryptic syntax) and uses CP/M's GSX interface. Using this interface enables graphical output to either local screen or remote devices connected through a serial port (like Tektronix 4010 text-and-graphics terminal emulator running on PC). Limitations: - No colors, no shades of gray. Color 0 is blank, others are mapped to solid pixels. - No READPIX function. - PALETTE, SETPAL and SOUNDX are dummy.

Project was moved to https://github.com/canopennode ---- CANopenNode is an open source software stack used for serial communication of multiple devices over the CAN/CANopen Network. It works on different microcontrollers, is reliable, simple and powerful and is suitable for industrial or home automation. CANopen is the internationally standardized (EN 50325-4) (CiA DS-301) CAN-based higher-layer protocol for embedded control system.

...Mobile number and message can be imported from Microsoft Excel Worksheet (xlsx) and Text (txt) files to send sms using any GSM modem or phone connected with pc through usb or serial interface.

Miniature platform based on the Arduino platform with the KS0108 screen, and peripherals.

A small program for an Arduino compatible micro controller that controls the flight of a model (water-) rocket. It does control the preparation of the recovery system, has automatic launch detection, an apogee detection system, parachute deployment, and safety timers. All this is managed with the most simple one button and one LED user interface.

OW.NET -- 1-Wire API port from Java (and J#) to C#. Use the Dallas 1-Wire and iButton chips with standard C# using a serial adapter (also CF.net) or the TMEX drivers on the Windows platform. No J# distribution installation required.

ButterflyOS is a very simple operation system for the Atmel AVR Butterfly board. It's based on the AvrX multitasking scheduler, created by Larry Barello. A byte-code program for ButterflyOS, can be sent and managed through the serial interface.