Search Results for "c source code" - Page 2

This application is a ASCII-based data scope. When used with a 'spy' cable such as the CBL-Full-1A product from www.commfront.com this progrmam shows the ASCII chars on both sides of a comm link. There are three main tabs on the user interface. The 'Vertical' tab displays the comm link conversation in a vertically-scrolling half-duplex mode. Each 'side' of the conversation is detected by the user-configured 'start msg' and 'end msg' byte sequence. The 'Horizontal' tab shows...

The N8VB vCOM Virtual Serial Port Driver creates pairs of virtual serial ports on your Windows 2000 or XP system that are "virtually" connected together like a null modem cable. It behaves like a Virtual Null Modem Cable.

FUNterm is a serial port terminal program for Windows. It offers basic serial connection. Because FUNterm is written using basic Win32 calls, with no high-level libraries, it works under Linux using Wine. The serial driver can be used separately.

BikiSoft contains the windows software and atmel firmware for the BikiRom Mega-board product line. The bikirom boards are used to re-tune 1990-2002 Nissan SR20 based ECUs and ER34 ECUs. The hardware is available seperately.

Firmware for a VT-2xx Terminal Clone

This project aims a proving an Hardware as a VSCP node (M2M) to store information remotely on the CAN network.

Immersion Cooker Mk II: A food-oriented, feature-rich water-bath controller for slow cooking sous vide. Cook just about anything to perfection with open source hardware and software.

Allows you to redirect all communication data from RS232 compliant serial port device into a text file for further analysis. RS232 Data Logger redirects data from any available serial port/ports and works under Virtual Machine.

FCUtilsLibrary provides a collection of functions to communicate and control Danfoss frequency converters. One of the main targets is, to create an “easy to use” library which is independent from the operation system and the physical network.

UAVPSet is a program to adjust and configure your parameters for your OpenSourceQuadroCopter.

KHexTerm is a simple serial port terminal, useful for testing of peripheral still using RS-232 interfaces. KHexTerm provides a easy to use GUI written in C++ using Qt 4.x and supports hex and text input/output modes.

This is a serial-to-ethernet and/or ethernet-to-serial gateway project. Such a software could reveal useful in many cases.

A server application, a TELNET server, which mainly works as an interface for users to connect to the server serial port or another TELNET server. Any new ideas may be added in along the implementation.

.Net library for the Crystalfontz displays CFA631, CFA633 and CFA635. Also, provides classes to scroll text, display a progressbar, and link a com port to a more logical name with the WMI.

This project is dll which can help user to communicate with serial port.

Termie is a simple RS232 terminal.

uGNU/RTOS (literally "micro G'Noo RTOS") is an Open Source serial Real Time OS for microcontrollers (PIC, ATMEL).

Serial Port to TCP/IP Connection Mapper. Maps sockets to serial ports.

HW(VHDL) and SW of logic analyzer and On-Chip-Verification(OCV) for Value Change Dump(VCD) file format that exported to seemd SystemC ,ModelSIM, and many other EDA tools. Very easy and Simple.

Ponticulus (a virtual COM-port over TCP/IP redirector) allows synchronous connecting and disconnecting to a remote serial port (e.g. on an embedded device). It was initially based on com2tcp, part of the com0com project. (http://com0com.sourceforge.net/)

The goal of zAutomation project is to design/implement hardware, firmware and software for remote control and monitoring of physical objects, by using the ZigBee technology and internet. The field of application is robotics and domotics.

GUMA is a GPRS-Gateway written in C#. It contains a terminal for serial communication, phonecall-screen, SMS-Screen to send SMS from GPRS USB-Modem to GPRS phone. Param: Port, Baud, Parity, Data-/Stopbits, Write-/Readtimeout, Pin.

Keep It Simple Bus is a PC+MCU based Robotics Framework that utilizes serial port to interface to multiple DC/Servo/Stepper motors through PIC12F683 ising binary protocol. Main goal is to do it as cheap as possible with minimal number of components, fast

Development of code to control the LCD display, keypad , communications and other aspects of the CFA-633 hardware from Crystalfontz. ( Based on PSoC processors from Cypress )

This program builds up a Modem server, which supports Hiroyoshi Kurohara's NPCOMM-Suite.