Search Results for "the command line"

The Null-modem emulator (com0com) is a kernel-mode virtual serial port driver for Windows. You can create an unlimited number of virtual COM port pairs and use any pair to connect one COM port based application to another. The HUB for communications (hub4com) allows to receive data and signals from one COM or TCP port, modify and send it to a number of other COM or TCP ports and vice versa.

This project provides three different interfaces for programming embedded chips: a GObject based library (for developers), an executable binary (for computer geeks) and a GTK+3 front-end (for less geeky users). Actually NXP LPC and STM32 based chips are supported.

This program will read a file (or stdin) containing a list of AT commands. Each command will be send to the modem, and all the response for the command will be output to file (or stdout). Example, to hang up any ongoing call: $ echo ATH | atinout - /dev/ttyACM0 - ATH OK $

Serial ports are a classic way for computers and peripheral devices to communicate. Originally modems, printers and laboratory equiptment had serial ports. The serial ports were hardware chips with known addresses. Modern computers and devices often use USB to emulate serial communications. This works well, except the device has a serial address (e.g. ttyUSB0) and a USB address. tty2usb is a utility that probe system information to display the link between USB and serial addresses.

Operating System for embeded device based on small µController (Microchip, Atmel, …) This OS enable the device to be connected and controlled by a PC trought RS232 protocol (COM, TTY or USB port) with standard Terminal or Shell integration.

jpnevulator - just another serial sniffer

yet another PalmOS serial browser, primarily for GPS receivers. he consists of several distinct applications (like ZboxZ), so he is rather slow, but flexible. nauta can be used as a serial logger for multiple simultaneous channels.

ttytest is a simply testcom-like console, async, miltithreaded tool for serial lines checking in loopback/stub/terminal modes

uGNU/RTOS (literally "micro G'Noo RTOS") is an Open Source serial Real Time OS for microcontrollers (PIC, ATMEL).

Ponticulus (a virtual COM-port over TCP/IP redirector) allows synchronous connecting and disconnecting to a remote serial port (e.g. on an embedded device). It was initially based on com2tcp, part of the com0com project. (http://com0com.sourceforge.net/)

se290 is a tool for uploading files into Sony Ericsson(tm) phones.

gives remote control of a PC running MS-DOS (which e.g. does not have a monitor display attached to it). The screen image (currently text mode only) is taken from the graphics card and transferred to other computer via serial link and displayed there

MuCTools is a group of command line utilities connect with Philips'P89C668 (8051 type) and other Philips microcontroller bootloaders, completing the 8051 development chain with free software for linux. muctools0.9 works with limited features. See README

A collection of tools to tokenize PBASIC source code and send it to a BASIC Stamp microcontroller.

The MtxOrbCtl program allows you to control a Matrix Orbital Serial LCD screen from the command line. It is designed to be used in conjunction with shell scripting to show the status of boots, etc.