Search Results for "MCT Version Control"

The Null-modem emulator (com0com) is a kernel-mode virtual serial port driver for Windows. You can create an unlimited number of virtual COM port pairs and use any pair to connect one COM port based application to another. The HUB for communications (hub4com) allows to receive data and signals from one COM or TCP port, modify and send it to a number of other COM or TCP ports and vice versa.

Designed for data-logging applications (weather, hydroponics, greenhouses, aquariums, home automation, power consumpion, solar or wind generators etc.), this solution can be useful also in alarms and burglar. Now you can develop MySQL and web enabled Arduino applications only working on Arduino and PHP. To keep ligth the Arduino Sketch, you can port all not realtime logic to PHP side. At the end your application will works on XQ+Arduino UNO even 24/7 with only 20 Watt AC power, and can...

Sredird is a serial port redirector that is compliant with the RFC 2217 "Telnet Com Port Control Option" protocol. This protocol lets you share a serial port through the network. RFC 2217 was orginally implemented in Cisco Terminal Servers in IOS version 11.x.

Operating System for embeded device based on small µController (Microchip, Atmel, …) This OS enable the device to be connected and controlled by a PC trought RS232 protocol (COM, TTY or USB port) with standard Terminal or Shell integration.

The goal of zAutomation project is to design/implement hardware, firmware and software for remote control and monitoring of physical objects, by using the ZigBee technology and internet. The field of application is robotics and domotics.

gives remote control of a PC running MS-DOS (which e.g. does not have a monitor display attached to it). The screen image (currently text mode only) is taken from the graphics card and transferred to other computer via serial link and displayed there

SCADA(Supervisory Control and Data Acquisition)system based on Scilab,include Serial,OPC,Modbus,Mysql,TCP/IP interface, and PID simulation, FUZZY control and ect...

tcp2com creates a bridge between a TCP socket and a serial port (COM). The program runs as a service under Windows NT. With tcp2com, you can telnet into any device you may have plugged into your COM port.

The MtxOrbCtl program allows you to control a Matrix Orbital Serial LCD screen from the command line. It is designed to be used in conjunction with shell scripting to show the status of boots, etc.

Serial Debugger, moninter and control the behavior of the serial ports.

The milowidget is a coffee roaster profile/control project, using a Arduino contol board and implementing PID.