Search Results for "hardware"

serialconsole (sc) is a minimal terminal program allowing to use one machine to access the serial console of another machine.

This project provides three different interfaces for programming embedded chips: a GObject based library (for developers), an executable binary (for computer geeks) and a GTK+3 front-end (for less geeky users). Actually NXP LPC and STM32 based chips are supported.

A cross platform GUI configuration tool for Ciseco XRF radio devices accessed over serial or USB. This product is produced independently from Ciseco, and carries no guarantee from Ciseco about quality, suitability or anything else. The supplier of this product assumes all responsibility for it.

Serial ports are a classic way for computers and peripheral devices to communicate. Originally modems, printers and laboratory equiptment had serial ports. The serial ports were hardware chips with known addresses. Modern computers and devices often use USB to emulate serial communications. This works well, except the device has a serial address (e.g. ttyUSB0) and a USB address. tty2usb is a utility that probe system information to display the link between USB and serial addresses.

Este projeto visa controlar através da porta serial um dispositivo. compatível com hardware da Robotica Simples, porem pode ser modificado para qualquer outro produto serial. O Hardware atendido é a placa controladora de 8 reles.

A project to embed Lua on different hardware platforms. Currently ARM variants are targeted, but it should be possible to port it to any platform that is supported by the gcc+newlib combo. Platform access libraries will also be provided.

smartCOM is a graphical serial device terminal, it's an alternative to minicom. It is aimed mainly at hardware developers who need a gui test tools to talk to their custom hardware. The GUI is written using the wxWidgets library, and using the tinyxml to save or load config. http://gnssinfo.com/2012/11/21/wiki-smartcom/

Cutecom is a graphical serial device terminal, IOW an alternative to minicom. It is aimed mainly at hardware developers who need a terminal to talk to their custom hardware. It is written using the Qt library and was inspired by the terminal Bray++.

Simple and dumb tool to access serial ports. Mainly intended for use to access serial consoles of various hardware.

HW(VHDL) and SW of logic analyzer and On-Chip-Verification(OCV) for Value Change Dump(VCD) file format that exported to seemd SystemC ,ModelSIM, and many other EDA tools. Very easy and Simple.

The goal of zAutomation project is to design/implement hardware, firmware and software for remote control and monitoring of physical objects, by using the ZigBee technology and internet. The field of application is robotics and domotics.

se290 is a tool for uploading files into Sony Ericsson(tm) phones.

A collection of tools to tokenize PBASIC source code and send it to a BASIC Stamp microcontroller.

A portable library to access braille displays.

DRAKE is a true homebrew game console that consists of specially crafted hardware, system software and games.

SerialPortNet is an open source serial port communication library for Microsoft .NET. It's written in c#, implements complete .NET 2.0 specifications, and is designed to allow for multiple OSes and add-on 3rd party Serial to Network adapters.

Mprog is a tool designed for programming microcontroller. At the moment it supports only Atmel AVR microcontroller It support read / write programm flash / eeprom. To file firmat are supported: binary & Intel hex.

The MtxOrbCtl program allows you to control a Matrix Orbital Serial LCD screen from the command line. It is designed to be used in conjunction with shell scripting to show the status of boots, etc.

There are different files supplied. One program for webcam controlling inline with the orginal idé. And different help classes if you would like to do something yourself. Also a general package of classes to communicate with the RS232 port.

Columbo Simple Serial Library is an easy to use, event driven serial port communication library for Linux.

ILM is a utility for the ISDN Line Monitor, an ISDN line monitoring hardware sold by many dealers in central europe. (e.g. Conrad and EgTel). It provides functions to: - retrieve all recorded information - erase all recorded information - config

Ssnooper is a program to created to aid in the debugging of serial line (RS232) connections. With ssnooper, a computer with two free serial ports can be connected between two serial devices to intercept and log all communications.

Miniboard Utility. Uploader and Monitor program for Mini Board and Motorola's MC68HC811E2 microcontroller.

This project contains the Linux serial driver for 8250/16550 (and compatible) UARTs. It is packaged in a stand-alone form that can be used with older and newer kernel versions. It also serves as a focal point for further serial driver development.

setserial is a program designed to set and/or report the configuration information associated with a serial port.