Open Source Serial Software - Page 3

The MtxOrbCtl program allows you to control a Matrix Orbital Serial LCD screen from the command line. It is designed to be used in conjunction with shell scripting to show the status of boots, etc.

The N8VB vCOM Virtual Serial Port Driver creates pairs of virtual serial ports on your Windows 2000 or XP system that are "virtually" connected together like a null modem cable. It behaves like a Virtual Null Modem Cable.

Provides access to a GPS device, fully written in perl

The RS232 Automatic Sender V1.0.2 sends a preconfigured message on the RS232 serial port. Any char can be sent and delays can be inserted between chars if needed. The program automatically sends the message when started and it will automatically close when done. The program was created to send messages to a Sharp LCD TV that could receive commands over the RS232 port.

A simple API, written in C, for accessing the Serial ports in a consistent way across Multiple desktop and embedded platforms. This has allowed programs for embedded devices to be mainly developed on the desktop, where test and debug is much easier. It can also be used to write serial port programs that are portable across different desktop platforms.

Secom is an object-oriented library of portable, reusable components for communicating over serial devices. With secom you can develop an application that will compile and execute on Posix and Windows, with little to no changes to the source code.

Serial Port Communication Software -- It sends command and receive data from the device connected on serial COM port.

Serial Port to TCP/IP Connection Mapper. Maps sockets to serial ports.

This is studying project in CUFE intended to develop a temperature and security system based on a microcontroller with a serial communication with PC The Embedded software is developed on AVR Atmega16 microcontroller while the PC user interface is programmed with C# .Net 4.5 Project Description: https://goo.gl/KK9Aqc

yet another PalmOS serial browser, primarily for GPS receivers. he consists of several distinct applications (like ZboxZ), so he is rather slow, but flexible. nauta can be used as a serial logger for multiple simultaneous channels.

A long due for the embedded device developers replacement for Minicom with a rich set of features such as GUI based on Qt, built-in TFTP server and scripting capabilities based on QtScript, multiple profiles support, Unicode and international charsets, hex dump and so on.

RxtxConsole is an API and GUI software, developed by Doidx with JSerialCom as the kernel. It can be used for multi- UART/RS232 interface operation. The platform supports Windows/MAC/Linux. Note: Developed with Java17 Follow these steps step by step to apply RxtxConsole, 1. LIST, to obtain all Serial ports currently available on the system. 2. CONNECT, Select a Serial port for connection and place it in the connection pool for use 3. CONNECTED, check that the Serial ports are connected. Sometimes, the Serial ports that you try to connect may have been used by other applications. 4. USE, select a connected serial port for which the command is transmitted only. 5. Start p2p communication with each other, ex: SCPI... 6. If you want to make other Settings on the system, you can USE SYS to change

This serial client in JAVA allows sending, reading and writing of SMS via a serial COM port. The tool uses the PDU SMS format. IRDA drivers are included. The functionality can be implemented into applications for remote alerting or SMS authentification.

SerialPortNet is an open source serial port communication library for Microsoft .NET. It's written in c#, implements complete .NET 2.0 specifications, and is designed to allow for multiple OSes and add-on 3rd party Serial to Network adapters.

GPS-aided car kinematics calculator. Computes forward and lateral accelerations of the vehicle, time to reach some speed and some distance. It will work on PocketPC.

Serial terminal in assembly x86 language that works without operational systems, suport ANSI and can be used on a laptop or notebook to easily and quickly configure routers, switches and other devices that uses serial comm ports

This is a set of Cocoa wrapper classes to access serial ports in Mac OS X.

The aim of the APterm project was to develop a terminal program running on TI-89 (possibly TI-92+ and V200 too). Some work was done, but due to TI's choice of cable it is not practically possible to make a terminal application. What the project has pro

Manages a pool of modems. Boots off a single disk. Allows protocols other than ppp.

Apache Avro™ is a data serialization system. Simple integration with dynamic languages. Code generation is not required to read or write data files nor to use or implement RPC protocols. Code generation is an optional optimization, is only worth implementing for statically typed languages. Avro relies on schemas. When Avro data is read, the schema used when writing it is always present. This permits each datum to be written with no per-value overheads, making serialization both fast and small. This also facilitates use with dynamic, scripting languages, since data, together with its schema, is fully self-describing. When Avro data is stored in a file, its schema is stored with it, so that files may be processed later by any program. If the program reading the data expects a different schema this can be easily resolved, since both schemas are present.

Arm mini real-time OS, cooperative kernel for LPC 2106, Arm TDMI-s cores.

OpenSource component library for serial communication

This project aims to produce an efficient Java library for decoding and encoding the SMS binary format as defined in 3GPP TS 23.040. This project has moved to http://attention.googlecode.com/

Send serial commands to your project from any device with a headphone jack that supports HTML5 and JavaScript. Does potentially require a few components to be added to your project. Designed for reliable results by default, but allows many adjustments. Uses 9600 8N1 by default. The baud rate is easily changed. The library is heavily commented to assist with any tweaking you want to do. For schematics of how to connect to your MCU/MPU, see http://www.robots-everywhere.com/re_wiki/pub/web/Cookbook.AudioSerial.html To add this library to your webpage, include this. <script src='https://audioserial.sourceforge.io/serial-1.0.js'></script> or <script src='http://audioserial.sourceforge.io/serial-1.0.js'></script> To see a working demo, click here. http://audioserial.sourceforge.io/serialdemo.html

Basic Stamp II Sending and Parsing Utility, As far as I know at the time of this posting, 3-3-2003 this is the only single application for linux that allows the user to complile and program the Basic Stamp II module in one command: i.e. Linstamp 0 myfile