Search Results for "serial port tester" - Page 2

Serial terminal program for engineering. Ideal for development, reverse engineering, debugging, datalogging and capture, and automatic test. The website is a comprehensive manual for Realterm. It has an comprehensive ActiveX/COM automation support so it can be used a serial component by other programs. An extensive commandline interface supports batch files and simple automatic test programming. Commands can be sent to running instances, and commands can be stored and run in files...

Multiplatform Serial Port Module for Python (Win32, Jython, Linux, BSD and more)

This project is an enhanced version of ser2net, a proxy that allows telnet/tcp connections to be made to serial ports on a machine.

Serial ports are a classic way for computers and peripheral devices to communicate. Originally modems, printers and laboratory equiptment had serial ports. The serial ports were hardware chips with known addresses. Modern computers and devices often use USB to emulate serial communications. This works well, except the device has a serial address (e.g. ttyUSB0) and a USB address. tty2usb is a utility that probe system information to display the link between USB and serial addresses.

This library, then DLL, designed for use with weighing terminal CI-5010A on the RS-422/485 or RS-232 via a physical or virtual COM port over USB in OS NT/2000/2003/XP/Vista/7/8 and reads and decodes the data of the operation, gross weight, net weight, unit number, value and sign weight, units and features indicators. Restoring communications using virtual serial port automatically. ORDER use and limitations: 1. You can optionally set the COM port in the procedure 'reinit()' with constantly...

Xpacket - the porpular Packet-Radio Terminal Plan is a Port to Linux. Actually there are the Sources from 1.81b8 . We need all Help!

A simple API, written in C, for accessing the Serial ports in a consistent way across Multiple desktop and embedded platforms. This has allowed programs for embedded devices to be mainly developed on the desktop, where test and debug is much easier. It can also be used to write serial port programs that are portable across different desktop platforms.

cyclades-serial-client is an RFC 2217 compliant client that works with servers such as Cyclades Terminal Servers and sercd. It creates a virtual serial port which connects to the server over a network.

A project to embed Lua on different hardware platforms. Currently ARM variants are targeted, but it should be possible to port it to any platform that is supported by the gcc+newlib combo. Platform access libraries will also be provided.

A serial port terminal emulator for the GNOME desktop.

A long due for the embedded device developers replacement for Minicom with a rich set of features such as GUI based on Qt, built-in TFTP server and scripting capabilities based on QtScript, multiple profiles support, Unicode and international charsets, hex dump and so on.

This service listens for incoming TELNET network connections. When a connection on the network port is received, the corresponding serial port is opened and the data between the two ports is redirected. When the network connection is closed, the serial port is closed and the service begins listening for another network connection.

... at a time, as they are received on each side of the link so the relative timing relationships can be monitored. Printable ASCII chars are shown. Non-printable are shown with a '0x' prefix. The two sides of this link referred to as 'Port 1' and 'Port 2'. Each side must communicate at the same baud rate. Each side can have its' own start message and end message character configurations. A log tab where state and error messages can be reviewed.

The N8VB vCOM Virtual Serial Port Driver creates pairs of virtual serial ports on your Windows 2000 or XP system that are "virtually" connected together like a null modem cable. It behaves like a Virtual Null Modem Cable.

The RS232 Automatic Sender V1.0.2 sends a preconfigured message on the RS232 serial port. Any char can be sent and delays can be inserted between chars if needed. The program automatically sends the message when started and it will automatically close when done. The program was created to send messages to a Sharp LCD TV that could receive commands over the RS232 port.

Java Serial Port Terminal allows you to open asynchronous serial COM ports on your computer. For all you Java fans out there, this is an example of how to access a serial port. Produced by BreezeElectronics.Net. Help link is added to Version 1.00

Operating System for embeded device based on small µController (Microchip, Atmel, …) This OS enable the device to be connected and controlled by a PC trought RS232 protocol (COM, TTY or USB port) with standard Terminal or Shell integration.

Java serial COM port terminal designed for use with the BreezeElectronics.Net USB Project Interface Kit.

FUNterm is a serial port terminal program for Windows. It offers basic serial connection. Because FUNterm is written using basic Win32 calls, with no high-level libraries, it works under Linux using Wine. The serial driver can be used separately.

Allows you to redirect all communication data from RS232 compliant serial port device into a text file for further analysis. RS232 Data Logger redirects data from any available serial port/ports and works under Virtual Machine.

BirdTerm - Bold Inventions Terminal -- A Java-based Serial Port Terminal program like TeraTerm. It implements ANSI sequences for setting text color and cursor position. It uses SWT/JFace and the RXTX Communication API.

A perl program/script for capturing and displaying the serial port data from a 22-812 RadioShack multimeter, might work for others.

my projects during my internship in oceanography centre, project 1: connection usb with OBS. project 2: treat the signal from serial port

KHexTerm is a simple serial port terminal, useful for testing of peripheral still using RS-232 interfaces. KHexTerm provides a easy to use GUI written in C++ using Qt 4.x and supports hex and text input/output modes.

A server application, a TELNET server, which mainly works as an interface for users to connect to the server serial port or another TELNET server. Any new ideas may be added in along the implementation.