Search Results for "c for windows 8" - Page 2

This library, then DLL, designed for use with weighing terminal CI-5010A on the RS-422/485 or RS-232 via a physical or virtual COM port over USB in OS NT/2000/2003/XP/Vista/7/8 and reads and decodes the data of the operation, gross weight, net weight, unit number, value and sign weight, units and features indicators. Restoring communications using virtual serial port automatically. ORDER use and limitations: 1. You can optionally set the COM port in the procedure 'reinit

Cereal Communicator is a free software designed for implementing serial communication through RS-232 interface. With this sofware, you can send and receive binary, hexadecimal and ASCII data. Requirements: .NET Framework 2.0. Works only on Windows.

A simple API, written in C, for accessing the Serial ports in a consistent way across Multiple desktop and embedded platforms. This has allowed programs for embedded devices to be mainly developed on the desktop, where test and debug is much easier. It can also be used to write serial port programs that are portable across different desktop platforms.

Este projeto visa controlar através da porta serial um dispositivo. compatível com hardware da Robotica Simples, porem pode ser modificado para qualquer outro produto serial. O Hardware atendido é a placa controladora de 8 reles.

A project to embed Lua on different hardware platforms. Currently ARM variants are targeted, but it should be possible to port it to any platform that is supported by the gcc+newlib combo. Platform access libraries will also be provided.

A long due for the embedded device developers replacement for Minicom with a rich set of features such as GUI based on Qt, built-in TFTP server and scripting capabilities based on QtScript, multiple profiles support, Unicode and international charsets, hex dump and so on.

smartCOM is a graphical serial device terminal, it's an alternative to minicom. It is aimed mainly at hardware developers who need a gui test tools to talk to their custom hardware. The GUI is written using the wxWidgets library, and using the tinyxml to save or load config. http://gnssinfo.com/2012/11/21/wiki-smartcom/

This service listens for incoming TELNET network connections. When a connection on the network port is received, the corresponding serial port is opened and the data between the two ports is redirected. When the network connection is closed, the serial port is closed and the service begins listening for another network connection.

This application is a ASCII-based data scope. When used with a 'spy' cable such as the CBL-Full-1A product from www.commfront.com this progrmam shows the ASCII chars on both sides of a comm link. There are three main tabs on the user interface. The 'Vertical' tab displays the comm link conversation in a vertically-scrolling half-duplex mode. Each 'side' of the conversation is detected by the user-configured 'start msg' and 'end msg' byte sequence. The 'Horizontal' tab shows...

BASIC interpreter for the 16bit PIC microcontroller 24FJ64GA002. The interpreter runs on the chip only, no compiler/tokenizer is needed. Communication with PC is done by USB-to-serial converter cable.

The N8VB vCOM Virtual Serial Port Driver creates pairs of virtual serial ports on your Windows 2000 or XP system that are "virtually" connected together like a null modem cable. It behaves like a Virtual Null Modem Cable.

FUNterm is a serial port terminal program for Windows. It offers basic serial connection. Because FUNterm is written using basic Win32 calls, with no high-level libraries, it works under Linux using Wine. The serial driver can be used separately.

BikiSoft contains the windows software and atmel firmware for the BikiRom Mega-board product line. The bikirom boards are used to re-tune 1990-2002 Nissan SR20 based ECUs and ER34 ECUs. The hardware is available seperately.

Firmware for a VT-2xx Terminal Clone

This project aims a proving an Hardware as a VSCP node (M2M) to store information remotely on the CAN network.

Immersion Cooker Mk II: A food-oriented, feature-rich water-bath controller for slow cooking sous vide. Cook just about anything to perfection with open source hardware and software.

Allows you to redirect all communication data from RS232 compliant serial port device into a text file for further analysis. RS232 Data Logger redirects data from any available serial port/ports and works under Virtual Machine.

FCUtilsLibrary provides a collection of functions to communicate and control Danfoss frequency converters. One of the main targets is, to create an “easy to use” library which is independent from the operation system and the physical network.

UAVPSet is a program to adjust and configure your parameters for your OpenSourceQuadroCopter.

KHexTerm is a simple serial port terminal, useful for testing of peripheral still using RS-232 interfaces. KHexTerm provides a easy to use GUI written in C++ using Qt 4.x and supports hex and text input/output modes.

This is a serial-to-ethernet and/or ethernet-to-serial gateway project. Such a software could reveal useful in many cases.

A server application, a TELNET server, which mainly works as an interface for users to connect to the server serial port or another TELNET server. Any new ideas may be added in along the implementation.

.Net library for the Crystalfontz displays CFA631, CFA633 and CFA635. Also, provides classes to scroll text, display a progressbar, and link a com port to a more logical name with the WMI.

System tray caller id applet for Windows based on .NET framework. Turns on caller ID function of the modem, and when any output occurs (a call comes in), a small log window appears showing all text, verbatim.

This project is dll which can help user to communicate with serial port.