Search Results for "jsql-injection"

Watchy, an open-source E-Ink smartwatch. Watchy is an E-Paper watch with open-source hardware and software. It has a barebones design utilizing the PCB as the watch body, allowing it to be worn as-is, or further customized with different 3D printed cases and watch straps. It is a unique timepiece that is also a wearable development platform, allowing users to create their own experience. Ultra-low-power e-paper 1.54″ display with 200 x 200 resolution and wide viewing angle. Wi-Fi & Bluetooth...

FEMM PMSM Motor GUI — V1 A multi-functional desktop GUI that automates finite-element (FEMM) analysis of permanent-magnet synchronous motors (PMSM/IPM). Built on top of FEMM via pyfemm, this tool wraps the repetitive, error-prone steps of motor FEA — rotor rotation sweeps, current injection, dq transforms, and post-processing — into a single point-and-click interface, so you can go from a .fem model to full motor characteristics in minutes. No-load analysis Loaded analysis Inductance & parameters System-level Practical touches Author LEEBOE / 李柏毅 National Formosa University · FAMAX Co., Ltd

A user-friendly open-source project to learn about keystroke injection attacks or ‘BadUSBs’. By emulating a USB keyboard, BadUSBs can gain full access to a computer in a matter of seconds! Unlike with other BadUSBs, you don’t need to install an app, log in, compile, or copy scripts onto an SD card. You simply connect via WiFi to manage all your scripts from within the web interface. This tool is intended to be used for testing, training, and educational purposes only.

Upload, save and run keystroke injections remotely with an ESP8266 + ATmega32u4. Using a USB device that act as a keyboard to inject keystrokes is well known these days. The USB Rubber Ducky by Hak5 is THE hacker gadget for this kind of attack. It introduced a simple script language called Ducky Script, which this project uses too. The ESP8266 is a popular Wi-Fi chip used in a lot of projects. Because it's cheap, small, and has its own file system (SPIFFS), it's perfect for enabling an easy...

TracerInject is a software for computer-guided control of PHD 2000 syringe pump (Harvard Apparatus) to inject radiotracer for PET imaging. For quantitative PET, automatic control of pump is necessary to inject desired amount of radiotracer and TracerInject automatically controls syringe pump via serial port communication. It was originally programmed in MATLAB, but ported to C#. Code was written in SharpDevelop 5.1, and MS .NET Framework 3.5 is required.

MegaTunix is a cross-platform tuning application for some of the available DIY Fuel Injection controllers, including the MegaSquirt (MS1, MS1-Extra, MS2 and MS2-Extra) as well as the LibreEMS EFI system and the JimStim ECU stimulator/development tool.

Darwin 2: Java Framework for Evolutionary Computation (genetic algorithm, GA). A true framework with out-of-the-box functionality and extensibility of all classes. Interface-based pattern with dependency-injection to configure components.

...A two-settlement system consisting of a day-ahead market supported by a parallel real-time market to ensure continual balancing of supply and demand for power. 3. Management of grid congestion by means of locational marginal pricing (LMP), i.e., the pricing of power by the location and timing of its injection into, or withdrawal from, the transmission grid. 4. market power oversight and mitigation.

An application that estimates machine cycle times for the injection molding of plastic parts in a variety of resins. Useful for rough cost estimation.

EFIgy is a viewer for EFI (electronic fuel injection) log files. It uses plugins to extend its functionality. Current plugins are mostly for the Holley Commander 950.

ECUmanager is a multiplatform software tool designed for tuning, datalogging and analysis of an electronic fuel injection. Written in C++, and using Qt4 and qextserialport, ECUmanager is published under GPL.

FSEM is a set of freeFEM++ scripts and C++ code to solve the drift-diffusion (DD) semiconductor device equations by the finite element method (FEM). It was initially developed for the nonlinear study of semiconductors under high optical injection.

Homebuilt Experimental Aircraft Engine Management

The EFI332 project is a public domain development with the goal of developing a complete engine control system including fuel injection and spark control. This SourceForge based project is a companion to EFI332 to help focus the software development.

A bundle of tools for fault injection and -experiments with scope on the emulation of programming faults. Software faults are introduced in the sources of Java applications and can be toggled during runtime.