Search Results for "wire"

...The library can be loaded using the Arduino IDE's Library Manager. Direct Memory Access (DMA) can be used with the ESP32, RP2040, and STM32 processors to improve rendering performance. "Four wire" SPI and 8 bit parallel interfaces are supported. Due to the lack of GPIO pins, the 8-bit parallel interface is NOT supported on the ESP8266. 8 bit parallel interface TFTs (e.g. UNO format mcufriend shields) can use with the STM32 Nucleo 64/144 range or the UNO format ESP32. ILI9341 and ST7796 SPI-based displays are recommended as starting points for experimenting with this library. ...

Avoid by-guess-and-by-golly use of turns-to-inductance calculators to determine number of turns to yield the inductance you need. Using the inversion of Wheeler's formula for inductance of single-layer coils, calculates the number of turns required to produce a specified inductance. Specify desired inductance, coil radius, and winding pitch.

Wire Factory Simulator (WFS) is a free software to simulate the control of a factory, mainly controlled by IEC 61499 applications. You can build your own factory and controller. The controller can be implemented on any programming language. WFS was originally built to simulate the action of an IEC 614999 application. So, the devices in the factory are easily connected to IEC 61499 applications.

Please note that OWFS source code, and all Issue/Tickets/merge requests have now been moved to https://github.com/owfs/owfs/. Developer mailing lists will still be kept at Sourceforge. ---- OWFS -- 1-Wire file system. Use the Dallas 1-Wire and iButton chips with standard filesystem commands. Create temperature loggers. Monitor everything. OWHTTPD -- same system, only used as a light weight web server. OWFS is also ported to embedded routers, Mac OSX and Windows. Basically you can use these inexpensive little sensors and other chips with very simple wiring to sense and control the physical environment. ...

A robotic DIY styrofoam cutter consisting of one rotational and two translational axes. It cuts a variety of shapes out of styrofoam-like materials using a hot wire. This project documents the necessary hardware and software parts. Don't miss the follow-up project at http://raumschaum.org Its goal is to further develop hardware and software into an user friendly application.

An educational tool for designing and simulating digital logic circuits, featuring a simple-to-learn interface, hierarchical circuits, wire bundles, and a large component library. As a Java application, it can run on many platforms.

The goal of this project is to develop a hot wire foam cutter that relies on a simple embedded controller to provide real time functionality.

Magneticle is a 3D OpenGL physical simulation that applies the Biot-Savart law to charged particles operating inside a magnetic field produced by a current-carrying wire modeled as an arbitrary space curve.

OW.NET -- 1-Wire API port from Java (and J#) to C#. Use the Dallas 1-Wire and iButton chips with standard C# using a serial adapter (also CF.net) or the TMEX drivers on the Windows platform. No J# distribution installation required.

High level 1-Wire API hiding the network protocol details from the API user

A Java-based system for the collection and display of data from a Dallas Semiconductor 1-wire personal weather station, as well as common additional 1-wire sensors.

The 1-Wire Net PD Kit is an open source library designed for the portability of 1-wire applications to various target platforms. This API provides all of the 1-Wire Net services to communicate with Dallas Semiconductor's 1-Wire devices including iButtons.