Search Results for "test hardware"
Sort By:
Showing 29 open source projects for "test hardware"
View related business solutions-
Go From AI Idea to AI App FastAccess Gemini 3 and 200+ models. Build chatbots, agents, or custom models with built-in monitoring and scaling.
-
Earn up to 16% annual interest with Nexo.Generate interest, borrow against your crypto, and trade a range of cryptocurrencies — all in one platform. Geographic restrictions, eligibility, and terms apply.
-
1
NVIDIA Isaac Sim
NVIDIA Isaac Sim is an open-source application on NVIDIA Omniverse
NVIDIA Isaac Sim is a high-fidelity robotics simulation platform built on NVIDIA Omniverse to develop, test, and validate AI-driven robots in physically accurate virtual environments. It supports a wide array of robotics formats (URDF, MJCF, CAD), includes GPU-accelerated physics, and features immersive RTX rendering and multisensory simulation. Realistic physics via GPU-accelerated engines and RTX ray tracing. Multi-sensor simulation (RGB-D cameras, Lidar, Radar, IMU, contact sensors).... -
2
StarFishDAQ
A general purpose data acquisition system and development platform.
The StarFishDAQ (or SFDQ for short) is a platform for developing MCU based hardware without having to start from scratch. It consists of hardware, firmware and software components. The SFDQ allows those projects that would otherwise use an off-the-shelf DAQ, PLC or MCU SBC to start with a stack of hardware, firmware and software. This allows more control, customization, and future applicability without sinking a ton of effort. The SFDQ can be used simply and quickly, as-is in... -
3
GNS3
An advanced network simulator to design and configure virtual networks
Build, Design and Test your network in a risk-free virtual environment and access the largest networking community to help. Whether you are studying for your first networking exam or building out a state-wide telecommunications network, GNS3 offers an easy way to design and build networks of any size without the need for hardware. -
4
GeigerLog
Python program for Geiger counters and Environmental Sensors
GeigerLog is a combination of data logger, presenter, and analyzer, and is now released in version 2.1! Based on Python (Version 3), it runs on Linux, Windows, Macs, Raspberry Pi, and other. GeigerLog is WiFi-enabled for servers and clients; it can be monitored by SmartPhone. Initially developed for Geiger counters, it is now a more universal tool, which equally well handles data like temperature, air-pressure, humidity, CO2. Continues to support Geiger counters like GQ Electronic's... -
Our Free Plans just got better! | Auth0You asked, we delivered! Auth0 is excited to expand our Free and Paid plans to include more options so you can focus on building, deploying, and scaling applications without having to worry about your security. Auth0 now, thank yourself later.
-
5
GNSS-SDR
An open source software-defined GNSS receiver
An open source software-defined Global Navigation Satellite Systems (GNSS) receiver written in C++ and based on the GNU Radio framework. -
6
This program aquires data from the oscilloscope LeCroy9400A, Advantest TR4131 and from the PM3311 (own propriatary bus). Dieses Programm liest Daten der Oszilloskope LeCroy9400A, Advantest TR4131 und PM3311 (eigene proprietäre Schnittstelle) aus.
-
7
UMHDL
Integrated Development Environment (IDE) for learning HDL
UMHDL is an educational Integrated Development Environment (IDE) intended for learning digital designing with programmable logic devices using Hardware Description Languages (HDL) through simulation. It is an open-source application created at the Miguel Hernández University (UMH). The aim for the UMHDL development was to have a graphical application that allows learning the VHDL language without licensing restrictions (using some existing open-source tools) and requiring few resources. So,... -
8
AirSim
A simulator for drones, cars and more, built on Unreal Engine
AirSim is an open-source, cross platform simulator for drones, cars and more vehicles, built on Unreal Engine with an experimental Unity release in the works. It supports software-in-the-loop simulation with popular flight controllers such as PX4 & ArduPilot and hardware-in-loop with PX4 for physically and visually realistic simulations. It is developed as an Unreal plugin that can simply be dropped into any Unreal environment. AirSim's development is oriented towards the goal of creating a... -
9
VDT - Visual Disk Test : performs I/O tests on files, partitions, and/or disks with visual feedback/follow-up, offering flexible test area selection by size, location, percent, or combinations thereof, plus test duration control by time or size.
-
Stop Cyber Threats with VM-Series Next-Gen Firewall on AzureGain integrated visibility across all traffic in a single pass. Deploy Palo Alto Networks VM-Series to determine application identity and content while automating security policy updates via rich APIs.
-
10
jfDataLogger
PLC Data Logger
jfDataLogger ============ jfDataLogger can log data from PLC controllers. Supports Hardware: - Siemens S7-300/400 PLCs - AllenBradley (CompactLogic Controllers only) - ModBus IP protocol - National Instruments DAQmx System Features: - Trigger bit at start - Save/Load data set - Save Image - log to CSV Website: http://jfdatalogger.sourceforge.net -
11
xSMBus - Java I2C/SMBus API
USB Bridge for SMBus(I2C), GPIO, and Clock, Java API
[Introduction] xSmbus-m01 is not only a Java API, but also a program that can be executed separately. The following are its function options: Need to be executed at the command prompt, java -jar /YourPath/xSmbus-m01-1.0p.jar Help - list the parameter table Verification - verify that the product is working properly Test - used for system maintenance, in advance Check - determine if there is a device on the I2C location Scan - search in the range of 00-FF, search out on the I2C bus... -
12
DIY Arduino Boards IO I2C
DIY Arduino Boards for IO using port expanders and I2C
DIY Arduino Boards PCF8674 MCP23017 74HC595 CD4021 I2C Parallel IO Piezo buzzers See the Files section for a wide range of sensors and sample code Schematics PCB Layout Sample Code -
13
CANopen for LabVIEW
LabVIEW CANopen client library
A collection of VIs for easier interface with basic CANopen client operations such as SDO download, SDO upload and PDO messages. Helper VIs for arbitrary mapping of dictionary objects to specific PDOs are also implemented. The project includes a quite crude implementation of the DSP 402 profile for handling motor drives in velocity and/or in position mode. -
14
libec-vi-repo
LabVIEW VI's for use with the CH Instruments libec SDK
The libec-vi-repo project hosts LabVIEW virtual instruments (VI's) for use with the CH Instruments libec SDK, which allows you to control CH Instruments hardware from LabVIEW. The mission of this project is to cultivate a free and open community for the extensible development of these VI's. Supported operating systems: - Windows XP and higher - (Mac) OS X 10.6 and higher - Linux (x86) The libec SDK itself is hosted separately; for more information, visit the discussion forum, or... -
15
VibroToolbox is a tool for research and education in vibrometry. Test your audio equipment, describe responses to vibratory stimulation and analyze directionality. It works with precision i/o hardware or simple sound cards, various sensors and speakers.
-
16
Perl OBD-II Logger
A Perl program for logging OBD-II PID data
The goal of the Perl OBD-II Logger project is to create a flexible and efficient application that can capture and log OBD-II Mode 0x01 PID data from an automotive scantool. It is designed with accurate and efficient PID data logging in mind, and provides NO support for reading or resetting diagnostic trouble codes. By default, the output log file contains time-stamped PID values in a simple Comma Separated Values (CSV) format that can be readily imported into popular data analysis or... -
17
Qfsm
A graphical Finite State Machine (FSM) designer.
A graphical tool for designing finite state machines and exporting them to Hardware Description Languages, such as VHDL, AHDL, Verilog, or Ragel/SMC files for C, C++, Objective-C, Java, Python, PHP, Perl, Lua code generation. -
18
Instrumented Telescope
Software for instrumenting a Dobsonian telescope
This projects hold software required for instrumenting an alt-az telescope mount. The required hardware is documented here (http://simonbox.info/index.php/astronomy). The software enables real time conversion from (measured) alt-az to ra-dec and manages a connection to Stellarium (http://www.stellarium.org/), which allows you to view where the telescope is pointing in a virtual planetarium. -
19
Soundcard Digital Voltmeter
Measures analog DC signals with the PC soundcard.
With this software and a simple external hardware, the sound card input of a PC can be used to measure stationary or slowly changing analog signals (e.g. voltages). The hardware converts the input signal into a voltage proportional frequency. The software measures the frequency via the sound card and calculates the corresponding input signal level which is displayed numerically and in a “scope-like” view. -
20
HOPSA, high oxygen pressure sputter automation, is a Python 3 project to control a step wise sample creation Process. Although written for this specific task it is easy to adopt for any experimental task which changes hardware parameters and waits for a specific condition before proceeding. The graphical interface (QT4) includes plotting (matplotlib), instrument configuration/monitoring and a program step creator. The communication with the hardware is independent of the GUI and any number...
-
21
DRINKS Toolkit
DRINKS is a set of smart web-based widgets.
DRINKS Toolkit is a collection of web-based widget, focused in the first release, to realize an online strumentation. It provides a practical and immediate interface to represent your data in the best possible way. Every widget is drawed using HTML5 Canvas API in a Javascript based environment. Drinks was born to allow users to easily realize custom dashboards without any programming knowledge, infact, you can use your instrument on a webpage simply using HTML tags, or using BarMan... -
22
LabMonkey Embedded Automation Platform
Create networks of embedded devices for data logging/automation tasks.
LabMonkey is a collection of designs for embedded devices which can be networked together to provide a range of automation, data logging and signal processing functions. A key design objective is to use as little dedicated hardware as possible for communication between nodes in the network, and to be able to adapt the network topology in real-time so as to minimize the occurrence of collisions between packets. To achieve this, a protocol has been designed specifically for the task, and... -
23
-
24
RGP: Red General de Posicionamiento (Project Number P022-06/E16 - Junta de Andalucía) -- General Network Positioning based on open software and hardware. This project is the development and test of the standard IEC-60870-5 application layer protocol
-
25
This project aims a proving an Hardware as a VSCP node (M2M) to store information remotely on the CAN network.
