Search Results for "programing control panel"

The DarkLight Cover/Calibrator (DLC) is a DIY project to build a motorized telescope cover, flat panel, or a combination flip-flat system. Its modular design supports various setups: a 12V light panel without a servo for a wall-mounted calibration panel, a servo-only cover for sky flats, or both integrated into a flip-flat mechanism. The DLC also includes optional dew heating to reduce extra equipment and cabling. With available drivers, it works with ASCOM or INDI. We’re excited to...

QXRD is software for the acquisition and analysis of X-ray data taken with 2 dimensional detectors. The software can drive a Perkin Elmer XRD series flat panel detector and can be remote-controlled via a socket interface, or directly from SPEC

...It also includes a 'Counts Estimated' panel to estimate count rates per channel over time. Users can view, configure, and control the device directly from the application, as well as save both raw data and graphical results for later analysis. Tempico Software is ideal for researchers working with photon timing and lifetime studies.

#ESP.Meteo: Solar Wi-Fi weather station on ESP12 + ionistor + solar panel Current Functionality: *Forecasting the probability of frosts (according to the methods of Professor Brounov) *Forecast of the height of the lower edge of the cloud (VNGO by Selezneva) *Calculation of the height of the sensor according to the barometric formula (altimeter, for other projects) *Measurement of street temperature *Measurement of outdoor humidity *Measurement of street pressure *Calculation of the dew point *Monitoring of voltage on ionistors (charge-discharge control) *Monitoring the opening of the box flap with potatoes *Monitoring the system time-out every 5 minutes (operating time ~ 480 ms) *Monitoring the temperature on the balcony (the ability to connect up to 16 sensors DS18B20: 2 groups of 8 sensors per two APIKEY) *Sending data to the Thingspeak cloud *Sending data to Twitter

...The timer/regulator board communicates with the main board via a serial communication cable. The timer/regulator board can be commanded by the main board to power the system down for a precise interval in order to conserve battery power. A Web-based control panel SW is included.

A web-based system to register the advertisement panels on the roads. Cross-platform application written in PHP. Uses a GIS component based on mapserver to visualize the panel locations.