Search Results for "wire"
Sort By:
Showing 28 open source projects for "wire"
View related business solutions-
Try Google Cloud Risk-Free With $300 in CreditUse your credit across every product. Compute, storage, AI, analytics. When it runs out, 20+ products stay free. You only pay when you choose to.
-
Forever Free Full-Stack Observability | Grafana CloudBuilt on open standards like Prometheus and OpenTelemetry, Grafana Cloud includes Kubernetes Monitoring, Application Observability, Incident Response, plus the AI-powered Grafana Assistant. Get started with our generous free tier today.
-
1
TFT_eSPI
Arduino and PlatformIO IDE compatible TFT library
...The library can be loaded using the Arduino IDE's Library Manager. Direct Memory Access (DMA) can be used with the ESP32, RP2040, and STM32 processors to improve rendering performance. "Four wire" SPI and 8 bit parallel interfaces are supported. Due to the lack of GPIO pins, the 8-bit parallel interface is NOT supported on the ESP8266. 8 bit parallel interface TFTs (e.g. UNO format mcufriend shields) can use with the STM32 Nucleo 64/144 range or the UNO format ESP32. ILI9341 and ST7796 SPI-based displays are recommended as starting points for experimenting with this library. ... -
2
Turns-n-Layers is a command line transformer and induction coil design aid that calculates the amount of wire needed, both length (feet) and weight (lbs). Also, the finished dimensions of the coil and the resistance are also returned.
-
3
bctl
1-wire based boiler/DHW/distribution heating system controller
...The design is based on the 1-wire family of sensors and data I/O components. The software package is written in C++ and utilizes the owcapi and owlib facilities of the open-source owfs package for all 1-wire transactions. The software architecture is based on the QP hierarchical state machine framework developed by Quantum Leaps, and utilizes their QM modeling tool for state machine template generation. -
4
ePnR
ePnR is an IC block standard cell placement & routing tool
...Standard cells are described in a simple text based library (compliant with eLogSim). Placement follows initially the cell call order in the SPICE like circuit input netlist. However, a placement optimization, aiming at minimum weighted accumulated wire length, by simulated annealing is available. Routing consists of channel routing as first step. If un-routed connections are left, Maze routing can (optionally) be applied. ePnR does not guarantee completely finished routing. However, un-routed connections will be left with rubberband connections and marked start and end points for subsequent manual routing using a third party layout editor. ePnR outputs in CIF 2.0 and GDS stream format readable by e.g. the free KLayout editor. -
Earn up to 16% annual interest with Nexo.Generate interest, access liquidity without selling, and execute trades seamlessly. All in one platform. Geographic restrictions, eligibility, and terms apply.
-
5
W1RETAP
one-wire data logger for weather stations
** Migration Notice ** This project is now hosted at https://codeberg.org/stronnag/w1retap.git. Files here are of historic interest only. w1retap is an application to log data from Dallas 'one wire' sensors to relational databases or files. It is developed on Linux, but should be portable to other POSIX systems. -
6
The libbuspirate is a C library to talk with the bus pirate hardware (http://dangerousprototypes.com/docs/Bus_Pirate) in raw, binary scripting mode. The libbuspirate allows to quickly write a short C program to test interfacing with your favorite hardware. The library has mainly be used to interface through SPI with RF transceivers such as CC2500, MRF24J40, Ethernet controller such as ENC28J60, EEPROMs such as 24C02, 24FC1025, LCD display (PCD8544 / Nokia5110), LED display (HT1632), ......
-
7
Inductor Turns Calculator
Calculate number of turns needed to produce a coil with given L
Avoid by-guess-and-by-golly use of turns-to-inductance calculators to determine number of turns to yield the inductance you need. Using the inversion of Wheeler's formula for inductance of single-layer coils, calculates the number of turns required to produce a specified inductance. Specify desired inductance, coil radius, and winding pitch. -
8
WireFactory Simulator
Small factory simulator for control logic test purpose
Wire Factory Simulator (WFS) is a free software to simulate the control of a factory, mainly controlled by IEC 61499 applications. You can build your own factory and controller. The controller can be implemented on any programming language. WFS was originally built to simulate the action of an IEC 614999 application. So, the devices in the factory are easily connected to IEC 61499 applications. -
9
owfs and owhttpd
Project moved to https://github.com/owfs/owfs/
Please note that OWFS source code, and all Issue/Tickets/merge requests have now been moved to https://github.com/owfs/owfs/. Developer mailing lists will still be kept at Sourceforge. ---- OWFS -- 1-Wire file system. Use the Dallas 1-Wire and iButton chips with standard filesystem commands. Create temperature loggers. Monitor everything. OWHTTPD -- same system, only used as a light weight web server. OWFS is also ported to embedded routers, Mac OSX and Windows. Basically you can use these inexpensive little sensors and other chips with very simple wiring to sense and control the physical environment. ... -
AI-powered service management for IT and enterprise teamsGive your IT, operations, and business teams the ability to deliver exceptional services—without the complexity. Maximize operational efficiency with refreshingly simple, AI-powered Freshservice.
-
10
WeatherMonitoringStation
WeatherMonitoringStation monitors environmental data
WeatherMonitoringStation is BeagleBone/Embedded Linux based software written in C++ intended to read, monitor, share and display environmental data such as temperature, humidity, wind speed etc. At this stage of development, temperature is measured using a DS18B20 sensor and sent out via standard output and/or a TCP/IP connection. Additional features will be implemented in due time. Recommended setup: * Eclipse with CDT. * GNU toolschain for ARM. * Oscilloscope. * Open collector... -
11
STANTOR
Scada for Home Automation
Stantor is a SCADA for home automation/domotic project. It drives : k8061-K8055(USB), K8000(I2C), Arduino Mega and Uno, X10, 1-Wire, electricity meters, Webcam (motion), infrared remote controls. It uses WEB browser, smartphone, xHTML, SOAP, Websocket, HTML5 Apache, mySQL, PHP, javascript and Ajax. Stantor allows control of electrical equipments like boilers, shutters, lamps, pumps, etc...connected to the 220V/110 VAC. Gathering information of various kinds such as temperature, light, switches, position sensors is provided by Stantor permanently in real time. ... -
12
Oww (One-Wire Weather) is a server and client for Dallas Semiconductor / AAG 1-wire weather station kits.
-
13
BeamFlow
A electric, magnetic, and gravity field physics presentation program
BeamFlow is a scientific presentation and demonstration program for typical introductory physics problems involving electric, magnetic, and gravity fields in three dimensions. Real-time demonstration of the magnetic field around a wire, the gravity fields around rotating binary stars, and the electric field from multiple point charges are just some of the potential applications. -
14
The wth code implements the serial communication protocol to read und store Ultimeter, 1-Wire, WMR9x8 weatherstation data to SQLITE database. I2C and WS2000 sensors supported.
-
15
StyroFoamRobot
Cuts 3D objects from polystyrene foam (EPS/XPS)
A robotic DIY styrofoam cutter consisting of one rotational and two translational axes. It cuts a variety of shapes out of styrofoam-like materials using a hot wire. This project documents the necessary hardware and software parts. Don't miss the follow-up project at http://raumschaum.org Its goal is to further develop hardware and software into an user friendly application. -
16
An educational tool for designing and simulating digital logic circuits, featuring a simple-to-learn interface, hierarchical circuits, wire bundles, and a large component library. As a Java application, it can run on many platforms.
-
17
The goal of this project is to develop a hot wire foam cutter that relies on a simple embedded controller to provide real time functionality.
-
18
A weather-station control system for the AAG WSI-603 weather station and other 1-Wire based systems. Uses the OWFS 1-wire file system as the interface to 1-Wire system
-
19
Magneticle is a 3D OpenGL physical simulation that applies the Biot-Savart law to charged particles operating inside a magnetic field produced by a current-carrying wire modeled as an arbitrary space curve.
-
20
lysis is working on a features rich home automation system that ranges from CAN-bus, 1-wire and RF up to a HTPC; both hardware and software are addressed to make the really smart home; the domotics will provide energy saving, comfort, flexibility, safety
-
21
FoamBlade provides a complete toolchain for hotwire foam-cutting. FoamBlade currently supports 4-axis hot-wire foamcutting machines that are connected to the parallel port. Generating cut-files from special built DXF-Files is also possible.
-
22
OW.NET -- 1-Wire API port from Java (and J#) to C#. Use the Dallas 1-Wire and iButton chips with standard C# using a serial adapter (also CF.net) or the TMEX drivers on the Windows platform. No J# distribution installation required.
-
23
-
24
FXPyTurns-n-Layers is a graphical transformer and induction coil design aid. The application performs the physical design of the coils for transformer and induction coils to determine: the length/weight of wire required to wind a coil with the specified
-
25
FXTurns-n-Layers is a graphical transformer and induction coil design aid. The program allows you to determine: the length (feet) and weight (lbs.) of wire needed to wind a coil. The program calculates the coil's finished dimensions and total resistance,
