Search Results for "usb bootloader"

Pinguino is an electronics prototyping platform. It supports different 8- and 32-bit ©Microchip microcontrollers, all with built-in USB module. Pinguino comes with a USB Bootloader, a small program running inside the microcontroller which is responsible for transferring your application from your PC to the microcontroller memory and handing over the control to this program afterwards. No programmer is then needed, only a USB cable and a PC. Pinguino is also an Integrated Development Environement (IDE) which gives everyone the ability to write, compile and upload programs on a Pinguino board.

...SID is tested with - HAKKO 907 handpiece - HAKKO 908 handpiece - QUICK 907A handpiece (HAKKO klon, different characteristics of the sensor) - GORDAK handpiece (HAKKO klon, different characteristics of the sensor) - ATTEN handpiece (HAKKO klon, different characteristics of the sensor) - NONAME HAKKO klon (identical RTD characteristics) - SOLOMON SL 10 - SOLOMON HQ 10 - SOLOMON HQ 30 - WELLER PES-51 SID display's data on 16x2 LCD, it has USB port (used attm only for bootloader) and it outputs debug info on serial port of the mcu. It features fully tunable (no auto tuning so far) PID controller for the tip temperature.

Firmware for small µController board with 4x PT1000 temperature channels which control the temperature in one room via two fan units. PIC18F4455 based hardware. Can be used to control temperature in the basement or guest house, within a computer case, etc.