Search Results for "qt eda"
Sort By:
Showing 47 open source projects for "qt eda"
View related business solutions-
ConnectWise PSA (formerly Manage) allows you to stop working in separate systems, and helps you build a more profitable business. No more duplicate data entries, inefficient employees, manual invoices, and the inability to accurately track client service issues. Get a behind the scenes look into the award-winning PSA that automates processes for each area of business: sales, help desk, support, finance, and HR.
-
Whether natural disaster, cyberattack, or plain-old human error, data can disappear in the blink of an eye. ConnectWise BCDR (formerly Recover) delivers reliable and secure backup and disaster recovery backed by powerful automation and a 24/7 NOC to get your clients back to work in minutes, not days.
-
1
Quite Universal Circuit Simulator
A circuit simulator with graphical user interface (GUI)
Qucs is a circuit simulator with graphical user interface. The software aims to support all kinds of circuit simulation types, e.g. DC, AC, S-parameter, Transient, Noise and Harmonic Balance analysis. Pure digital simulations are also supported. -
2
SimulIDE
Real Time Electronic Circuit Simulator.
Real Time Electronic Circuit Simulator. Include PIC, AVR and Arduino simulation. Code Editor & Debugger for Arduino, GcBasic, PIC asm, AVR asm. Downloads: https://simulide.com/p/downloads/ WebSite: https://simulide.com Forum: https://simulide.com/p/forum/ Patreon: https://www.patreon.com/simulide AVR simulation provided by simavr: https://github.com/buserror/simavr PIC simulation provided by GpSim: http://gpsim.sourceforge.net/ -
3
VeroRoute
Qt based Veroboard, Perfboard, and PCB layout and routing application
Cross-platform software for producing Veroboard (stripboard), Perfboard, and 1-layer or 2-layer PCB layouts. Automatically prevents short-circuits and checks for open-circuits. Pre-compiled versions available for MS Windows and 64-bit Linux Mint 20.3 (should also run on other 64-bit Linux systems that are based on Debian and support Qt version >= 5.12.8). Android APK available (tested on Android 7 and Android 10) and requires device resolution of at least 1280x800. -
4
CircuiTikZ Generator
This software is a tool for designing electronic circuits using LaTeX.
This software is a tool for designing electronic circuits using LaTeX. With an intuitive graphical interface, you can create complex circuits quickly and easily, while the LaTeX code generator translates your designs into code compatible with the LaTeX circuitikz library. -
We design our technology to make workforce management easier. APS offers core HR, payroll, benefits administration, attendance, recruiting, employee onboarding, and more.
-
5
Kactus2
Kactus2 is a graphical EDA tool based on the IP-XACT standard.
Kactus2 is a toolset for IP-XACT based SoC design and provides packaging, integration and configuration of HW and SW components, plus register design and HDL import and generation. The source code is hosted at https://github.com/kactus2/kactus2dev. An example IP library is available at https://github.com/kactus2/ipxactexamplelib Video tutorials are available at https://www.youtube.com/user/Kactus2Tutorial Issue tracker is available at... -
6
eavref
A tool for low-power CMOS voltage reference designs
EAVREF is a computer-aided tool for robustly designing ultra-low-power CMOS voltage references. The tool is compatible with the powerful Ngspice simulator, enabling open-source microelectronics design flow with SkyWater 130nm Technology. -
7
A portable loudspeaker design system supporting measurement, modeling, simulation and optimization of boxes, filters and systems.
-
8
FreeCAD-PCB
Import your PCB boards to FreeCAD
[ENG] Mod FreeCAD-PCB allow you to import PCB boards to FreeCAD. Scope of mod: - support for many different layers, - possible to choose colours, transparency and names for each layer, - mod allows you to import IGES models with colours, - possible to show holes/vias independent. [PL] Moduł FreeCAD-PCB pozwala na importowanie płytek PCB do programu FreeCAD. Możliwości modułu: - wsparcie dla wielu różnych warstw, - wyświetlanie otworów, przelotek niezależnie od siebie, -... -
9
PEDA is electronic design automation software for schematic and PCB design with unique tools selection stack for manual routing and unified PCB and schematic database developed in Qt5 library.
-
Track leads, jobs, and tasks from one easy to use software. You can access your information wherever you are, get everyone on the same page, and grow your business.
-
10
simutron
AVR simulator IDE
Electronic circuit simulator. Simple environment to run and debug firmware for AVR 8-bit microprocessors. Able to run arduino firmware. Internally this program uses the open source Simavr AVR Processor Simulator (https://github.com/buserror/simavr) and wraps all its functions in a GUI shell. Setups for firmware debugging scenarios can be created dynamically. Able to run 16MHz MCU with decent set of external parts in real time. In particular this can be used for development of CNC firmware... -
11
RxCalc
RxCalc is a calculator for the analysis of multi-stage receiver.
RxCalc is a calculator for the analysis of multi-stage receiver. The software can calculate cascaded and system parameters: gain, noise, sensitivity, input and output P1dB and IP3, noise floor, spur-free dynamic range, MDS, SNR, and others. Sources code: https://github.com/arhiv6/rxcalc Binary package: http://sourceforge.net/projects/rxcalc/ -
12
My Beaglebone Black Project
show and configure
The Beaglebone Black project presented here is a software written by Python and Qt and is intended to show the simple control of inputs and outputs (GPIO), the graphic course of input signals GPIO, the configuration and sending and receiving of data via the UART interfaces, the display of the PIN configuration of the Beaglebone Black and the graphic display of the signal course at the analog inputs. The software runs on the BBB under Debian 8.9 and on Linux computers (as a demo). It is intended... -
13
The project development has been moved on GitHub https://github.com/pcb2gcode/pcb2gcode The GUI for pcb2gcode can be found here https://github.com/pcb2gcode/pcb2gcodeGUI pcb2gcode is a command-line tool for isolation, routing and drilling of PCBs that provides full support for both single- and double-sided boards. For more information, see http://sourceforge.net/apps/mediawiki/pcb2gcode/
-
14
AvrGui jest to program, który zajmuje się kompilacją i programowaniem kontrolerów. Wykorzystuje on kompilator avr-gcc. Zastosowanie biblioteki Qt umożliwia prace programu zarówno na systemach Linux, jak i windows.
-
15
Caneda
Caneda (Circuits and Networks EDA) is an open source EDA software.
Caneda (Circuits and Networks EDA) is an open source EDA software focused on easy of use and portability. While in the short term schematic capture and simulation is the primary goal, in the long term future, PCB and layout edition will be covered. -
16
QSapecNG is a Qt-based symbolic analysis program for linear analog circuits. In fact, it consists of two indipendently parts: the SapecNG framework engine, and the application gui QSapecNG.
-
17
Qfsm
A graphical Finite State Machine (FSM) designer.
A graphical tool for designing finite state machines and exporting them to Hardware Description Languages, such as VHDL, AHDL, Verilog, or Ragel/SMC files for C, C++, Objective-C, Java, Python, PHP, Perl, Lua code generation. -
18
FSMDesigner is a C++ based implementation for a Finite State Machine (FSM) design tool with integrated Hardware Description Language (HDL) generation. FSMDesigner4 uses the Simple-Moore FSM model guaranteeing efficient fast complex control circuits.
-
19
A IC/MEMS layout editor. Features: all angle, font generator, macros, boolean operations, design rule checker, supported formats:Calma GDSII, OASIS (Open Artwork System Interchange Standard), OpenAccess, DXF, CIF (Caltech Intermediate Form), ...
-
20
CAD2Board
is a Qt program to generate SMD chip shooter code
Still struggling with Excel to setup your pick and place machine ? Cad2Board reads component mounting information from Eagle, Altium Designer and Mentor Expedition PCB designs. Component or component groups can be assigned to feeder slots by drag and drop. Any modifications for PCB population can be defined to generate PCB variants, consider rotations from unusual tape and reel packaging or to account in advance for CAD library or PCB design bugs. Generated setup data is stored in a... -
21
CAPLET
GDS visualization and parallelized capacitance extraction
Project CAPLET is a capacitance extraction toolkit that extract capacitance at field-solver accuracy. CAPLET can directly handle GDS2 layout files into capacitance matrices in both GUI and command line interfaces. The internal extraction algorithm is specialized for VLSI interconnect structures but not exclusively, as long as the structure is of Manhattan geometry and embedded in a uniform dielectric material. -
22
-
23
The sigrok project aims at creating a portable, cross-platform, Free/Libre/Open-Source signal analysis software suite that supports various device types, such as logic analyzers, MSOs, oscilloscopes, multimeters, LCR meters, sound level meters, thermometers, anemometers, light meters, dataloggers, function generators, power supplies, GPIB interfaces, and more.
-
24
This project aims to develop an opensource software with an attractive and efficient GUI which allows to design linear electronic circuits and to characterize existing ones.
-
25
QConsole is a custom Qt widget implementing a standard console to be inherited to support a specific scripting language or shell, and then embedded in any Qt application. As example, a Tcl console (QtclConsole) is provided for use in EDA applications