Search Results for "flash memory"

...A Bootloader is a firmware running in the microcontroler device which allows the user to send it's own firmware without the need of a programmer. This Bootloader consists of: - firmwares for many devices (this firmware need to be send to the device's flash memory with a programmer, only once) - a PC software which communicates with the bootloader firmware in the device and send the user's program in its memory Where does it come from? This Bootloader is based on "Tiny PIC Bootloader" made by Claudiu Chiculita. A special THANK to him!!! What can it do? It can program: - Microchip PIC10/12/16/18/24/32/dsPIC30/33 - Atmel ATtiny, ATmega - TI MPS430 - NXP ARM Cortex-M0+ - Silicon Labs C8051 And this: - with light modifications to the Bootloader firmware for new devices - without modifying your source code or using a special linker script - via GUI or command line prog - with automatic Reset

Fresh Memory is an application that helps to learn large amounts of any material with Spaced Repetition method. The most important subject is learning foreign words, but Fresh Memory can be also used to learn anything else. The learning data is stored as flash cards and dictionaries. The flash cards may have several fields, and the user controls what combination of fields to learn.

Library for programming flash memory of STM8S105 using STM32F100. You may use this abandoned project as an inspiration.

It is a software to program ISP based 8051 controllers(89SXX) on Linux. The software decodes the hex file entered from the command line and send it to controller's flash memory using PC's parallel port.The hardware connections are very minimal.

...A 5-way cable is required to connect the microcontroller to the port; wiring information is given in the included manual page. Remember that a clock source is required in order to program the device, and that EA must be tied to Vcc when programming the internal flash memory. Note that since prog89S52 uses ioperm() and friends to access the underlying port hardware, you may need to run it as root. Both binary and source may be freely distributed and modified, but both are provided without any form of express or implied warranty.

QuickFlash is a C++-based analysis library for data files generated by the Flash hydrodynamics code. It provides high-performance access to large datasets in low memory situations and other restrictive environments.