Search Results for "parallel port automation"

This is a Dynamic C port of the BACnet stack at http://sourceforge.net/projects/bacnet. This BACnet library provides a BACnet application layer, network layer and MAC layer communications services for systems based on the Rabbit 4000, 5000 and 6000 processors. The rich feature set of the BACnet stack provides an ideal platform for developing Rabbit based control devices which can use the many BACnet tools out there to reduce the development time and effort.

The ASCO project aims to bring circuit optimization capabilities to existing SPICE simulators using a high-performance parallel differential evolution (DE) optimization algorithm. It supports Eldo, HSPICE, LTspice, Spectre, and Qucs.

...Supports programming vis ISP, Serial (Optiboot - all parts with >4k flash, and all parts with 4k flash for which an 8k version is available) or VUSB (Micronucleus - where appropriate) There are 272 different versions of micronucleus built (and part of the 2.0.0-dev branch now), and optiboot will dwarf that number! 0 of those have been tested. Obviously, we are leaning very heavily on automation of configuration generation for this release. Half of the tinyNeoPixel speeds have had the assembly routines modified in major ways (there's no more stupid menu for the port), but they are untested. Virtual boot relies on rewriting the vector table, such that the RESET vector points to the bootloader.

Designed for data-logging applications (weather, hydroponics, greenhouses, aquariums, home automation, power consumpion, solar or wind generators etc.), this solution can be useful also in alarms and burglar. Now you can develop MySQL and web enabled Arduino applications only working on Arduino and PHP. To keep ligth the Arduino Sketch, you can port all not realtime logic to PHP side. At the end your application will works on XQ+Arduino UNO even 24/7 with only 20 Watt AC power, and can be controlled by smartphone via WiFi or from Internet using some free dynamic IP. ...

prog89S52 is a utility for Linux on the PC, allowing programming of Atmel's AT89S52 microcontroller via the parallel printer port. Atmel's 89S are programmable via an SPI port and therefore require absolutely no additional components in order to program them in-system. This program requires a standard "Centronics" type PC parallel port (a bidirectional, EPP or ECP port is not required). A 5-way cable is required to connect the microcontroller to the port; wiring information is given in the included manual page. ...

It is a software to program ISP based 8051 controllers(89SXX) on Linux. The software decodes the hex file entered from the command line and send it to controller's flash memory using PC's parallel port.The hardware connections are very minimal.

"mprfgen" is a multi-port memory generator that can be used for VHDL designs. It can generate either generic or Xilinx-specific (through component instantiation) multi-port memories.

Firmware for small µController board with 4x PT1000 temperature channels which control the temperature in one room via two fan units. PIC18F4455 based hardware. Can be used to control temperature in the basement or guest house, within a computer case, etc.

...To ease creations of many menus with always same appearance. Simple example menus demo provided. Low-level LCD part included is for classic hardware HD44780 through the parallel port (based on code by Randy Rasa, see at http://ee.cleversoul.com/lcd-project.html)

ATMEL ATMega1280 based powerful, multifunctional, reliable, expandable and extremely flexible hardware platform for home and industrial processes automation, robotic toys, security systems, education and enjoyment.

Parallel Port Control Made Easy - parashell allows control of a PC parallel port (input and output) with simple command line arguments. The simplicity of these programs make it very easy to use in scripts. Control stepper motors, Relays, LEDs, etc...

Home Automation and Control System is a software which can control devices (using pc lpt port) at home from anywhere with any internet enabled device. This software drives a solid state relay by which we can control our home appliances.

gnuProload is a tool for programming the AT89S52 microcontroller over Linux. Actually it is a Linux port of the 'Proload' and (easy-downloader) software created by Sunrom Technologies which can be used to program AT89S52 microcontrollers.

FoamBlade provides a complete toolchain for hotwire foam-cutting. FoamBlade currently supports 4-axis hot-wire foamcutting machines that are connected to the parallel port. Generating cut-files from special built DXF-Files is also possible.

The goal is an Ascom driver for parallel port connected, telescope controlling stepper motors.

Read/write data to your parallel port from Linux using this GUI app. Control individual pins. Good for hardware interfacing.

The parallel port PWM and/or encoder kernel space Linux driver allows open/closed loop control of motors using the parallel port.

PICPrg is a fast Linux command line (or ncurses) program, to program any Microchip PIC microcontroller using the PC parallel port interface. Any parallel port PIC programmer hardware can be used, simply edit the configuration file or use the ncurses conf

Input/output (IO) C library exposing a common API for real mode and permission-restricted access to parallel port under Windows, Linux and MS-DOS operative systems. It also allows pin-by-pin port access.

An open-source Windowslibrary for low-level parallel port access. Does not require installation of any drivers. Emulates API of most commonly used solutions.

Currently-under-development library of OS-independent objects to provide complex parallel port control, high-resolution timers and other similar facilities needed when using PC I/O ports to control external digital electronics.

Control up to 8 electrical devices with gportal using your PC's parallel port. Add power to your Linux box and let it do the hard work of turning on/off the lights in your home or business. Written in C, runs with Xwindow and uses GTK+ 2.0.

Programmer for Atmels 8051 devices, parallel Flash and E2PROM memories and etc.

PEP is a modelling and verification framework for parallel systems, providing a large number of different modelling languages and verification techniques (e.g. SDL, Petri nets and model checking)

A nice tool for low-level managing of the parallel port and for experimenting with it. It uses GTK+ 2 for the GUI and runs on Linux and Windows (with mingw32).