Search Results for "eeprom"

This Arduino library is a native Apple HomeKit accessory implementation for the ESP8266 Arduino core and works without any additional bridges. This project is mainly based on an esp-home kit for ESP-OPEN-RTOS. I ported the RTOS-based implementation of the esp-home kit to the pure Arduino environment, aimed at easy and fast building projects using Arduino IDE (or Eclipse with sloeber, PlatformIO). Enjoy the "one-key" build, "one-key" upload, and work to link various other Arduino libraries...

This is a Linux command line tool to do raw I2C accesses to a bus, IF SUPPORTED BY THE ADAPTER, to probe the bus, read or write some data, detect glitches, do a bench, program an EEPROM with the required blocksize, test the I2C bus driver, ... Raw I2C mode enables data frames that are not supported by SMBus and related tools (such as i2cget, i2cset, i2cdump)

Firmware for small µController board with 4x PT1000 temperature channels which control the temperature in one room via two fan units. PIC18F4455 based hardware. Can be used to control temperature in the basement or guest house, within a computer case, etc.

C source code of firmware for a hardware hack for "Ninja Pan and Tilt" using "Teensy USB Development Board". It is cross-platform (Win, MAC, Linux) over USB, reports status and can record/playback movements to eeprom. Networked using "telnetninja".

PalmPIC is a Microchip PIC programmer running on PalmOS compatible devices. You can read, write and verify PIC16 series FLASH ROM and EEPROM memory. Complete hardware/software portable solution.

In-System-Programmer for ATMEL AT89S8252 Microcontroller. This program for the LINUX platform is able to read and write the Flash and EEPROM Memories of an ATMEL AT89S8252 microcontroller connected to the parallel port of a PC.