Search Results for "above"

UPDATE: As of March 2023, the CFDTOOLS project has moved its public repository to NASA's official organization on GitHub: https://www.github.com/nasa/cfdtools While this repository will remain available, it will no longer receive updates or be monitored for issues. Please see the link above for latest releases and issue status. ---- The CFD Utility Software Library (previously known as the Aerodynamics Division Software Library at NASA Ames Research Center) contains nearly 30 libraries of generalized subroutines and close to 100 applications built upon those libraries. These utilities have accumulated during four decades or so of software development in the aerospace field. ...

...The sensors are placed in three different locations along the body tube to provide data on the temperature between the motor mount and the body tube, the temperature above the motor mount but below the flameproof recovery wadding, and finally the area where the parachute is housed, just above the wadding. This project is used in conjunction with the Arduino Primary Avionics Module (A-PAM) which can be found at https://sourceforge.net/projects/arduino-base-avionics-bay. An Instructable is available at https://www.instructables.com/Project-Icarus-a-Temperature-Sensor-Model-Rocket

...These rockets are flown in large open areas, often deserts and dry lake beds. These larger rockets also use larger propellants, typically in the High Power Rocketry (HPR) range of “H” and above impulse level. Not only do these motors require you to be certified in HPR, the motors themselves tend to be rather expensive. My goal was to develop a system that could be used by high school students. It would involve proven rocket designs that could be flown on school yards. That meant it needed to be small, fitting everything into a body tube with a diameter no more than 42mm. ...

Barracuda is a high-speed sequence aligner based on Sanger's BWA and utilizes the latest Nvidia CUDA architecture for accelerating alignments of sequence reads generated by next-generation sequencers.

PANorama is a Linux-compatible, open-source software package for panicle image acquisition, processing, and phenotyping. PANorama 2.0 contains new phenotype measurements and is available for download within the "Files" tab listed above. Installation and user instructions are located within the "Wiki" tab. How to videos are available for streaming at the link below, or for download in the "Files" tab above. Information regarding the project and funding can be found at http://ricediversity.org, and within the corresponding publications and how-to videos: How to videos: http://vimeo.com/cornellricelab PANorama1.0 (Crowell et al. 2014): http://www.plantphysiol.org/content/165/2/479.short PANorama2.0 (Crowell et al. 2016): (http://goo.gl/vQux5Z)

...Instructions to compile the source code: You need to download a SVN client and then from command line: svn export http://svn.code.sf.net/p/gpumat/code/trunk ./GPUmat the above command creates a folder ./GPUmat with the source code. Then go to the 'doc' folder, open the GPUmat_Developer_Guide.pdf and check the chapter "Source code compilation"

...The 1-Sphere forward solution for the MEG and the 4-Sphere forward solution for the EEG is implemented in CUDA C and an accelerated solution is obtained using the NVIDIA GPU when the solution is calculated for a large number of dipoles (on the order of 15000 and above) and sensor locations. Speedup by a factor of 22 and 32 is obtained for the EEG and MEG solution respectively when compared to the fastest CPU implementation available in the public domain. The complete source code and pre-compiled binaries are also made available via an open source license (GPL Version 3). A CUDA enabled NVIDIA graphics card is required to use the software.

The "Ce USB Kit" consists of a C API, a LabView API, and a set of utilties to support the commercial CESYS USB2FPGA board on the linux platform. It is a user-space solution written in C. Kernel 2.4 or above (usbfs).

DongFeng is a mips simulator which simulates MIPS I ISA and above.

PariGUIde is a GUI for Pari-GP, a math.-programm, that is generally oriented above number theory and driven by very efficient algorithms. The mission of pariGUIde is to simplify the use of Pari-GP, and promote the the joy in mathematical experimenting.