Search Results for "sec"

...The web interface files are present in the data directory but UI has its own repository ESP3D-WEBUI. Use GPIO2 to the ground to reset all settings in a hard way, 2-6 sec after boot / not before!! Set GPIO2 to ground before boot change boot mode and go to special boot that do not reach FW. Currently, boot takes 10 sec - giving 8 seconds to connect GPIO2 to GND and do a hard recovery for settings. Complete configuration by web browser (Station or Access point) or by Serial/telnet commands.

This library has complementary features to the "cmath" library. Here we present functions for trigonometric calculations (cot, sec, csc, acot, asec, acsc) and hyperbolic (coth, sech, csch, acoth, asech, acsch) and exponential (nthrt) calculations and more. The results are presented in radians. For results in degrees multiply 180/M_PI by radians or use function torad. For degrees multiply M_PI/180 or use todeg. For more libraries, go to: https://sourceforge.net/u/augustomanzano/profile. ...

...It is intended to work with Celestron Nexstar mounts like NexStar GPS, NexStar GPS-SA, NexStar iSeries, NexStar SE Series, NexStar GT, Advanced-VX, Advanced-GT and CGE mounts. Communication to the hand control is 9600 bits/sec, no parity and one stop bit via the RS-232 port on the base of the hand control. To build it libnexstar version 0.11 or newer is needed, which can be found here: https://sourceforge.net/projects/libnexstar/ Mac OSX binary is available here: http://sourceforge.net/projects/openpectool/files/prebuilt/openpectool-0.0.1.dmg/download