Search Results for "abaqus"

...Various performance benchmarks show that the code generated using MFront is in most cases on par or better than other implementations, generally written in Fortran. For mechanical behaviours, MFront introduces interfaces for various finite element or FTT solvers (Cast3M, Code-Aster, ZeBuLoN, Abaqus, Europlexus, AMITEX_FFT, etc..). The authors hope that it will prove usefull for researchers and engineers, in particular in the field of solid mechanics.

TexGen is a geometric textile modelling software package to be used for obtaining engineering properties of woven textiles and textile composites. Citing TexGen We would be grateful if you could acknowledge use of TexGen where appropriate and suggest using one of the following references: L P Brown and A C Long. "Modelling the geometry of textile reinforcements for composites: TexGen", Chapter 8 in "Composite reinforcements for optimum performance (Second Edition)", ed. P Boisse,...

...CalculiX is most popular FEA open-source package (like Code-Aster and Elmer-FEM). it is comparable in features with most known commercial packages like ANSYS, NASTRAN, Abaqus, etc. Good for structural, mechanical, thermal and fluid applications (trusses, plates, frames, shells, solid bodies). It has powerful nonlinear capabilities (including tension/compression only material like concrete) and most types of analysis (modal, thermal, buckling, coupled, etc) . See home page at http://www.dhondt.de New versions can be obtauned here: http://calculixforwin.blogspot.com/2015/05/calculix-launcher.html PS Appimages for Scilab, wxMaxima and GNU Octave were added

Create Strain and Kinetic Energy Density maps out of a Natural Frequency extraction analysis (i.e. modal analysis). Works with a variety of FEA results format: NASTRAN, ABAQUS, Ansys, Medina/Permas.

Reads the .STA file from the specified folder and track the associated Abaqus job to show the progress of the Step solution.

...This project provides a simple C++ code that reads a finite element mesh, modify it and generate cohesive interface elements where needed. It can read Gmsh (http://geuz.org/gmsh/) or ABAQUS input files and write the mesh to any format such as ABAQUS and jive (http://www.dynaflow.com/en_GB/jive.html). The code was written by VP Nguyen (google scholar link: http://scholar.google.com/citations?user=jCqqCAoAAAAJ&hl=en) when he was at TU Delft and the algorithm is described in the article VP Nguyen, "An open source program to generate zero-thickness cohesive interface elements", Advances in Engineering Software, 2014(74), 27--39. ...