Search Results for "parallel port automation"

rfMaxima is an RF toolbox for the wxMaxima computer algebra system.

This is a Dynamic C port of the BACnet stack at http://sourceforge.net/projects/bacnet. This BACnet library provides a BACnet application layer, network layer and MAC layer communications services for systems based on the Rabbit 4000, 5000 and 6000 processors. The rich feature set of the BACnet stack provides an ideal platform for developing Rabbit based control devices which can use the many BACnet tools out there to reduce the development time and effort.

The ASCO project aims to bring circuit optimization capabilities to existing SPICE simulators using a high-performance parallel differential evolution (DE) optimization algorithm. It supports Eldo, HSPICE, LTspice, Spectre, and Qucs.

Virtual instrumentation software, currently designed for modifying automobile engines. Intended as a modular framework to communicate with devices on an IO port (serial, parallel etc.) and allow a visual representation of the instrument.

"mprfgen" is a multi-port memory generator that can be used for VHDL designs. It can generate either generic or Xilinx-specific (through component instantiation) multi-port memories.

Firmware for small µController board with 4x PT1000 temperature channels which control the temperature in one room via two fan units. PIC18F4455 based hardware. Can be used to control temperature in the basement or guest house, within a computer case, etc.

QModBus port to Android/Symbian using Qt4/Ministro libraries, uses libmodbus and qledmatrix

HOPSA, high oxygen pressure sputter automation, is a Python 3 project to control a step wise sample creation Process. Although written for this specific task it is easy to adopt for any experimental task which changes hardware parameters and waits for a specific condition before proceeding. The graphical interface (QT4) includes plotting (matplotlib), instrument configuration/monitoring and a program step creator. The communication with the hardware is independent of the GUI and any number...

Parallel Port Control Made Easy - parashell allows control of a PC parallel port (input and output) with simple command line arguments. The simplicity of these programs make it very easy to use in scripts. Control stepper motors, Relays, LEDs, etc...

JPlasma is a Java port of PLASMA (Parallel Linear Algebra for Scalable Multi-core Architectures)

A free software made to control the parallel port on linux systems. Programmed in C em GTK the software allows to control, monitore em automatize the old printer port, and made it useful again.

Read/write data to your parallel port from Linux using this GUI app. Control individual pins. Good for hardware interfacing.

PICPrg is a fast Linux command line (or ncurses) program, to program any Microchip PIC microcontroller using the PC parallel port interface. Any parallel port PIC programmer hardware can be used, simply edit the configuration file or use the ncurses conf

Software for parallel-port data acquisition devices built using the MAX186 analog-to-digital converter.

Input/output (IO) C library exposing a common API for real mode and permission-restricted access to parallel port under Windows, Linux and MS-DOS operative systems. It also allows pin-by-pin port access.

Java pic programmer for the pic 16F8X / 16F628 series pic chips. The programmer utilises the parallel port to interface with the pic programmers electronics. The Java programmer will initially be targeted at linux OS but, with help, hope to expand the to

Currently-under-development library of OS-independent objects to provide complex parallel port control, high-resolution timers and other similar facilities needed when using PC I/O ports to control external digital electronics.

Control up to 8 electrical devices with gportal using your PC's parallel port. Add power to your Linux box and let it do the hard work of turning on/off the lights in your home or business. Written in C, runs with Xwindow and uses GTK+ 2.0.

Programmer for Atmels 8051 devices, parallel Flash and E2PROM memories and etc.

PEP is a modelling and verification framework for parallel systems, providing a large number of different modelling languages and verification techniques (e.g. SDL, Petri nets and model checking)

A nice tool for low-level managing of the parallel port and for experimenting with it. It uses GTK+ 2 for the GUI and runs on Linux and Windows (with mingw32).

Simple GTK2 application allowing users to manually toggle devices attached to a parallel port device on or off (through the D0->D8 data lines), or run an automatic sequence based on a simple language contained in this program. Good for driving relays, etc

Eppnics: Electronic parallel port network interfaced control system. Eppnics allows you to control electronic circuits connected to a parallel port via a TCP/IP connection.

In-System-Programmer for ATMEL AT89S8252 Microcontroller. This program for the LINUX platform is able to read and write the Flash and EEPROM Memories of an ATMEL AT89S8252 microcontroller connected to the parallel port of a PC.

OCW is a scripting language and interpreter for controlling complex operations of valves and pumps in microfluidic devices. The interpreter program uses parallel ports to interface with any automation project. The program runs on Linux and Windows.