Search Results for "design"

PICSimLab is a realtime emulator of development boards with MPLABX/avr-gdb debugger integration. PICSimLab supports microcontrollers from picsim, simavr, uCsim, qemu-stm32, qemu-esp32, and gpsim. PICSimLab has integration with MPLABX/Arduino IDE for programming the microcontroller's boards. As the purpose of PICSimLab is to emulate real hardware it does not have any source code editing support. For code editing and debugging the same tools used for a real board should be used with PICSimLab,...

myFocuserPro is an ASCOM and Moonlite compatible stepper motor telescope focus controller (DIY) based on Arduino Nano/Uno. A popular DIY ASCOM focuser with more than 121,000+ downloads. (c) Copyright Robert Brown 2014-2024. All Rights reserved. Permission is granted for personal and Academic use only. Spreadsheet to calculate what stepper motor to use. https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/Documentation/Nema-Stepper-Motors.xlsx/download

...Graphics features allow composing Figures and export to postscript files which can be converted to pdf, imported into photoshop for rasterization, or used in page design software like Illustrator.

PPMScope is a do-it-yourself oscilloscope with an open source design. The intent is that the project can be constructed by an electronics hobbiest using the instructions included. The design is a compromise between features and cost. The bandwidth is lower than a commercial scope, so it's use is limited to signals of 500 kHz and below. It's sample buffer is also smaller than a commercial scope, however sufficient for most oscilloscope functions.

QNICE is a simple 16 bit processor intended to teach the basics of hardware design as well as operating system design. A TTL implementation is planned, a FPGA implementation is available here: http://qnice-fpga.com. Currently there exists a C based simulator and an assembler.

LabMonkey is a collection of designs for embedded devices which can be networked together to provide a range of automation, data logging and signal processing functions. A key design objective is to use as little dedicated hardware as possible for communication between nodes in the network, and to be able to adapt the network topology in real-time so as to minimize the occurrence of collisions between packets. To achieve this, a protocol has been designed specifically for the task, and implemented in assembler for AVR microcontrollers. ...

EDA / PCB software to envelope and manufacture printed circuit boards

The läufer project was established in the summer of 1998 by students of engineering design of Darmstadt University of Technology and by students of industrial design of Darmstadt University of Applied Sciences. The development and realization of a pred

Digital Signal Processing Block Diagram Compiler - user extendable to all DSP's, but presently supports only the TI C2000 family. Rich support for fixed point arithmetic, both saturated and unsaturated. Block diagram entry is via TinyCAD (included).

The ixo.de USB JTAG pod and firmware allows to access JTAG-capable chips via USB and a protocol like Altera USB-Blaster.

OpenVGA is an free and open FPGA-based implementation of a VGA compatible graphics adapter, and utilising low-cost hardware. The project includes the PCB schematic and artwork, Verilog HDL, firmware assembly code, and driver source code.

This project aims to develop a prototype system that explores how we should re-invision computer system design based on changes in how people get the software that they run, as well as advances in static analysis of software.

a firmware for AVR910 programmer. started from ver3.8 (http://www.mikrocontroller-projekte.de/Mikrocontroller/AVR-Prog/AVR-Programmer.html) upgraded for speed and reliability. provided generic masterSPI interface please mail me on AlexRainPE196@hotbox.ru

The autocar project seeks to develop an autonomous ground vehicle. The project scope includes the design of the vehicle hardware and embeeded software, additional server side/PC software will be needed as well.

OpenWebServo is an Open Source Hardware and Software project. Its main goal is to develop a web-controlled servo system. The project includes web application, firmware and hardware design.

QUASI is stand-alone AVR RISC processor simulator with debugging features, EDA-like GUI and plugin interface.

SECU86 is Standard Engine Control Unit x86. The project goal is to develop a standard computer and OS (opensource) that would work on any car. It'll be based on the x86 processor and will try to replace the poor standard ECU that comes with any car.

vcomp is a verilog compiler for x86 linux targets - it was a commercial product which is now in the process of being GPL'd

This is meant to be a powerful, but easy to use math software. It's by the user and for the users.

Inspired by the success of the BMA EFIS, and the autopilot project, this project aims to build a basic EFIS for experimental aircraft. Initial develpment will focus on the design of the AHRS, which will serve as the platform for the EFIS in the future.

PicOload is a programmer and a bootloader that allow to program a PIC 16f87X / 16f87XA using a RS232 serial line whithout leaving the chip from his support and without disturbing the rest of the device

PPort is a simple yet handy automation program and its documented counterpart for interfacing a PC with external devices. With this bundle, one can control any household appliance or electronic device with minimal hassle and practically no changes

MEDDAC is the seeding point for designing a new approach to Operating System design itself. It is an Open Source project with roots in mainframe design and development the author began in 1979. Monitor Editor Disassembler Decompiler Assembler Compiler

The Simple Software Radio peripheral project is dedicated to developing and supporting open source software defined radio software and hardware. The project places an emphasis on thorough documentation and elegant modular design.

GPICD - The GNU PIC Programmer and In-Circuit Debugger. GPICD is an open-source Programmer and In-Circuit debugger for the Microchip (TM) PIC (TM) family of microcontrollers. It is an ideal complement for the gputils development tool set.