Search Results for "computer based test"

myFocuserPro is an ASCOM and Moonlite compatible stepper motor telescope focus controller (DIY) based on Arduino Nano/Uno. A popular DIY ASCOM focuser with more than 121,000+ downloads. (c) Copyright Robert Brown 2014-2024. All Rights reserved. Permission is granted for personal and Academic use only. Spreadsheet to calculate what stepper motor to use. https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/Documentation/Nema-Stepper-Motors.xlsx/download

What is it? It's a Bootloader for Microchip, Atmel, NXP, TI and 8051 devices. A Bootloader is a firmware running in the microcontroler device which allows the user to send it's own firmware without the need of a programmer. This Bootloader consists of: - firmwares for many devices (this firmware need to be send to the device's flash memory with a programmer, only once) - a PC software which communicates with the bootloader firmware in the device and send the user's program in its...

A simple to use serial communication software for communicating with other serial, MCU and Arduino. The SoftIB Serial Communicator communicates with other Serial devices that use a simple asynchronous communication using only the RX and TX signals without any control signals. The application was developed based on the communication with microcontrollers, but it can be used in all other cases.

...The bandwidth is lower than a commercial scope, so it's use is limited to signals of 500 kHz and below. It's sample buffer is also smaller than a commercial scope, however sufficient for most oscilloscope functions. This is a version based on the PIC16F877A microcontroller running with a 20MHz clock. The maximum sampling rate is 1 MHz with a 5 Mhz equivalent sampling mode. Currently, the computer interface supports USB, serial, and parallel ports. Good luck on the construction and I hope you enjoy your oscilloscope. I am happy to answer any questions or provide technical support for this design.

! This website is discontinued ! The new, improved MiniChameleon is maintained as of January 2014 on github: https://github.com/emsec/ChameleonMini ATXmega based emulator for contactless smartcards, designed and maintained by Embedded Security Group at the Ruhr-University in Bochum.

libNT is a Number Theory Library which is based on a BigInteger Class. It will contain several algorithms for solving Number Theory Problems. Written in the IDE Code::Blocks

OCR c++ library of computer optical recognition methods. In library: contour recognition; contour vectorisation; matrix letters feature recognition; web based GUI; assembler core on SS3 instruction; xml support; detect page rotation and segmentation;

Cnc's IP Data Volume Report: Logs IP to IP contact, number of packets, bytes, time of contact, Ethernet too! View via local web interface. Very simple for those who want to view who your computer is contacting the most!

This project aims to develop a prototype system that explores how we should re-invision computer system design based on changes in how people get the software that they run, as well as advances in static analysis of software.

SECU86 is Standard Engine Control Unit x86. The project goal is to develop a standard computer and OS (opensource) that would work on any car. It'll be based on the x86 processor and will try to replace the poor standard ECU that comes with any car.

FTP BNC. File Transfer Protocol Bouncer. Allows Any one to setup a Bouncer to a ftp server. Uses, mask the real identity of a ftp server, provide link over lans running NAT or etc. Proxy and FXP modes. Commands, or commands and data in proxy, data in FXP

Fast-Fourier-Transform-based number theory code to test Mersenne numbers for primality using the Lucas-Lehmer test and the Crandall-Fagin irrational-base discrete weighted transform (IBDWT) algorithm (Math. Computation 62 (205), pp.305-324, January 1994)

The open bicycle computer (oBiCo) is an outdoor computer to be mounted on your bike. We are providing an open source based plattform to ether use Linux based software or go with a small GPL'ed C++ OS (Booting in just 2 seconds)