Search Results for "arduino-homekit-esp32"

PICSimLab is a realtime emulator of development boards with MPLABX/avr-gdb debugger integration. PICSimLab supports microcontrollers from picsim, simavr, uCsim, qemu-stm32, qemu-esp32, and gpsim. PICSimLab has integration with MPLABX/Arduino IDE for programming the microcontroller's boards. As the purpose of PICSimLab is to emulate real hardware it does not have any source code editing support. For code editing and debugging the same tools used for a real board should be used with PICSimLab, such as MPLABX, Arduino IDE, or VSCode with PlatformIO. ...

...Code or portions of code may not be copied or used without written permission from the author. Other Focuser Projects myFP2ESP32 WiFi - https://sourceforge.net/projects/myfocuserpro2-esp32/ [ESP32 Only] myFP2ESP8266 WiFi - https://sourceforge.net/projects/myfp2esp8266-focus-controller/ myFP2N - Nextion touch screen display - https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/myFocuserPro2N%20NEXTION%20TFT%20DISPLAY/ myFP2M - Ready made Controllers https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/myFocuserPro2M/ Please look in the Files-Documents folder for more information. ...

myFocuserPro is an ASCOM and Moonlite compatible stepper motor telescope focus controller (DIY) based on Arduino Nano/Uno. A popular DIY ASCOM focuser with more than 121,000+ downloads. (c) Copyright Robert Brown 2014-2024. All Rights reserved. Permission is granted for personal and Academic use only. Spreadsheet to calculate what stepper motor to use. https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/Documentation/Nema-Stepper-Motors.xlsx/download

A simple to use serial communication software for communicating with other serial, MCU and Arduino. The SoftIB Serial Communicator communicates with other Serial devices that use a simple asynchronous communication using only the RX and TX signals without any control signals. The application was developed based on the communication with microcontrollers, but it can be used in all other cases.

This project has been moved to http://pros.cs.purdue.edu/ PROS is a lightweight and fast alternative operating system for the VEX Cortex Microcontroller. It features multitasking, low-level control, and Wiring compatible functions to harness the full power of the Cortex. With a real-time kernel based on FreeRTOS and a development environment built on Eclipse CDT, PROS uses proven software to increase the reliability and usability of the VEX development system across all three major...

...We would also like to experiment with a "Delta" version which could use either bare RF or WiFi to exchange state data between machines. A "hive mind" if you like. For the new-generation version, we propose targeting two hardware platforms: 1. Arduino, since it's cheap and easy to use, while remaining close to the bare metal 2. A purpose-built AVR card, or easily ported to cards obtainable from sources such as futurlec.com, etc. RaspberryPi is also an option later