Search Results for "usdt flash program"

...A Bootloader is a firmware running in the microcontroler device which allows the user to send it's own firmware without the need of a programmer. This Bootloader consists of: - firmwares for many devices (this firmware need to be send to the device's flash memory with a programmer, only once) - a PC software which communicates with the bootloader firmware in the device and send the user's program in its memory Where does it come from? This Bootloader is based on "Tiny PIC Bootloader" made by Claudiu Chiculita. A special THANK to him!!! What can it do? It can program: - Microchip PIC10/12/16/18/24/32/dsPIC30/33 - Atmel ATtiny, ATmega - TI MPS430 - NXP ARM Cortex-M0+ - Silicon Labs C8051 And this: - with light modifications to the Bootloader firmware for new devices - without modifying your source code or using a special linker script - via GUI or command line prog - with automatic Reset

This program is designed to measure thermophysical properties of materials (thermal diffusivity and specific heat) by the laser flash method. A huge thanks to ULVAC RICO Inc.(Japan), whose equipment is still in operation and for which this program is implemented. The measurements are performed by a multifunctional analog input board PCI-1710UL (ADVANTECH, Taiwan), which is used as a variable-frequency signal recorder (in range 40 Hz – 40 KHz).

Beryllium¹º is a program designed to facilitate the creation of group safety data sheets (GSDSs) for hazardous substances and processes. The created GSDSs fulfill the conditions of EG Nr. 1272/2008 (Globally Harmonized System of Classification and Labelling of Chemicals, GHS) and §20 Gefahrenstoffverordnung (German regulation and version of European Union Directive 67/548/EEC: Safety advice concerning dangerous substances and preparations).

This program estimates the lightning flashover rates of overhead electric power transmission and distribution lines, according to IEEE Stds. 1243 and 1410. New BSD License and IEEE Copyright. Now includes line arrester evaluation using the OpenEtran simulator, licensed under GPL. This feature was developed with support from EPRI and Dominion Virginia Power.

It is a software to program ISP based 8051 controllers(89SXX) on Linux. The software decodes the hex file entered from the command line and send it to controller's flash memory using PC's parallel port.The hardware connections are very minimal.

prog89S52 is a utility for Linux on the PC, allowing programming of Atmel's AT89S52 microcontroller via the parallel printer port. Atmel's 89S are programmable via an SPI port and therefore require absolutely no additional components in order to program them in-system. This program requires a standard "Centronics" type PC parallel port (a bidirectional, EPP or ECP port is not required). A 5-way cable is required to connect the microcontroller to the port; wiring information is given in the included manual page. Remember that a clock source is required in order to program the device, and that EA must be tied to Vcc when programming the internal flash memory. ...

During the period from 1990 through 2002, EPRI funded the development of a Lightning Protection Design Workstation (LPDW), which was used by many utilities to assess the lightning performance of distribution lines. Since about 2002, this program has not been available. EPRI decided to release the simulation kernel of LPDW under an open-source license (GPL v3), so it may be incorporated into IEEE Flash and other projects. OpenETran can presently simulate multi-conductor power lines, insulators, surge arresters, non-linear grounds, and lightning strokes. It efficiently calculates energy and charge duty on surge arresters, and iterates to find the critical lightning current causing flashover on one or more phases. ...

This software supports programming of Atmel microcontrollers 89Sxx ('51), ATtiny, ATmega and 90Sxx (AVR). It can erase built-in Flash and EEPROM memories as well as read and program them. ISP Programmer also supports serial Atmel DataFlash memories.

ATMEL ATMega1280 based powerful, multifunctional, reliable, expandable and extremely flexible hardware platform for home and industrial processes automation, robotic toys, security systems, education and enjoyment.

Earnest is a A PHP-MYSQL AI EXPERT SYSTEM for creating powerful expert system easily. Its simple PHP API can also be called from JAVA, browsers or other software to perform GIS and other comparisons. Also has ability to create XML results.

Tiny Flash ActionScript Speed math program to train rapid multiplication and addition. Good for any age who wants to improve arithmetic and general maths skills. Quick mathematics is useful.

In-System-Programmer for ATMEL AT89S8252 Microcontroller. This program for the LINUX platform is able to read and write the Flash and EEPROM Memories of an ATMEL AT89S8252 microcontroller connected to the parallel port of a PC.

This program is a simulator/debugger for Atmel AVR flash microcontrollers, built with Motif (incompatible with Less Tiff). It has language independent interface. This version can almost fully simulates AT90S and ATmega series.

TinyOs test program for write/read of different size data records to/from flash.