Free Video Projector/Monitor Calibration Software
Video Projector/Monitor Calibration Software orginally developed as ColorHCFR. This code base is based off version 2.1 and will aim for a more open development process. The opensource version integrates an ArgyllCMS interface for continued meter support and development. If you feel the program has been of value to you since I started working on it about 3 years ago please consider a contribution via the link below. Thanks! -zoyd https://www.paypal.me/zoyd
A cross platform Python frequency scanning GUI for rtl-sdr
A cross platform Python frequency scanning GUI for USB TV dongles, using the OsmoSDR rtl-sdr library. In other words a cheap, simple Spectrum Analyser. More information can be found at: http://eartoearoak.com/software/rtlsdr-scanner An installer and standalone versions for Windows are located here: https://github.com/EarToEarOak/RTLSDR-Scanner/releases Sources are available on GitHub: https://github.com/EarToEarOak/RTLSDR-Scanner ** The up to date installer is no longer maintained on this site and can now be found at https://github.com/EarToEarOak/RTLSDR-Scanner/releases **
TANGO is a device oriented control system for Linux and Windows. It provides a framework in C++, Java and Python for implementing distributed control objects. TANGO has a full set of tools and hundreds of device servers.
IEC 60870-5-104 protocol tester.
This software implements the IEC60870-5-104 protocol (client side) for substation data acquisition and control via tcp/ip network using the QT UI Framework. It can be compiled on Linux and Windows platforms. It's possible to poll and view data from the substation system (RTU/concentrator) and also send commands.
PLC-Logger and Analyzer
Use PLC-logger to store and analyze data from almost every PLC-system. The following PLC-Systems are accessible: - Every PLC-System running a Modbus-TCP / Modbus-UDP Server - Siemens S7 via IBH NetLink - Siemens S7 with Ethernet-Interface - Codesys-based PLC-Systems - via OPC-Servers V0.61: - Bugfixes V0.60: - Some Bugfixes - Some data evaluation V0.59: - Modbus TCP Server Simulator supports Modbus UDP - Possibility to set bookmarks V0.57: - Modbus UDP supported - Edit configuration from connection-manager - Configuration keeps selected after starting or stopping V0.56 HF1: - Bugfix executing EasyModbusTCP Server Simulator V0.56: - Integration of EasyModbusTCP Server Simulator in "Tools"-Menue - Improvements in Modbus-Connection Wizard - Modbus Addresses shifted by (-1) to meet Modbus specification
CvMob is an Open Source tool to automatic visual analysis of human movement. The software calculates the optical flow to generate data about trajectory, velocity and acceleration using low-quality videos. For more informations, please visit our website: http://www.cvmob.ufba.br/
Oscilloscope application for Arduino & .NET. Includes full source code. Version 2 features sampling rate x10.
Serial Bootloader for Microchip, Atmel, NXP, TI, 8051 microcontrolers
What is it? It's a Bootloader for Microchip, Atmel, NXP, TI and 8051 devices. A Bootloader is a firmware running in the microcontroler device which allows the user to send it's own firmware without the need of a programmer. This Bootloader consists of: - firmwares for many devices (this firmware need to be send to the device's flash memory with a programmer, only once) - a PC software which communicates with the bootloader firmware in the device and send the user's program in its memory Where does it come from? This Bootloader is based on "Tiny PIC Bootloader" made by Claudiu Chiculita. A special THANK to him!!! What can it do? It can program: - Microchip PIC10/12/16/18/24/32/dsPIC30/33 - Atmel ATtiny, ATmega - TI MPS430 - NXP ARM Cortex-M0+ - Silicon Labs C8051 And this: - with light modifications to the Bootloader firmware for new devices - without modifying your source code or using a special linker script - via GUI or command line prog - with automatic Reset
Processes, decodes, displays, records and replays EUROCONTROL ASTERIX
ASTERIX DARR (Display Analyse Record Replay)processes, decodes, displays, records and replays (tracks/plots) EUROCONTROL ASTERIX messages. It is a a full plot/tracker display providing filters, different map overlays, indication of the “track in coast” state, moving labels, and assigning CLF (Cleared Flight Level). Every display parametar (color, font, size etc..) is configurable. Additionally supports: 1.ASTERIX stream Recording (up to 11 different data streams) 2.Replay of ASTERIX “replay” Recordings in the original or up to 10 X faster speed 3.Opening of ASTERIX “raw” recordings in raw format to analyze and visualize data in Local or Google Earth Display 4.Export of imported/captured data in KML/KMZ format in order to analyze/visualize it in Google Earth. 5.Export of live/replayed data in real time to Google Earth 6.Forwarding of ASTERIX data streams between networks or to a different multicast address/port. 7. Support for RMCDE 6 byte header ASTERIX format
Open Factory 3D is a free factory design application that helps you to place your machines and factory equipment on a factory 2D plan, with a 3D preview.
Profiling and analysis of laser beams with ImageJ
This open-source software enables profiling and analysis of laser beams. It can be used with a variety of cameras supported by ImageJ and Micro-Manager, or images from any other source. It provides all common analysis methods like D4Sigma, knife-edge, as well as fitting of Hermite-Gauss and super-Gauss functions.
Python GUI program to work with Geiger counters like GMC-300/320/500
GeigerLog is a Python based GUI program to work with GQ Electronic's GMC-300 / 320 and now also GMC-500 Geiger counters. Available as "scripts" to run where a proper Python environment exists, or as "bundle", which brings its own Python environment (but currently runs on Linux only). GeigerLog allows reading of Geiger counter data, logging to file, printing to screen and plotting as graph, showing Count Rate vs. Time, both in various, selectable units. The history stored on the Geiger counter's internal memory can be extracted, analyzed and graphed in the same way. The graph is live auto-updated and allows various customization. Time ranges for analysis can be set manually or per left/right mouse click. GeigerLog can control some functions of a connected counter (limited to GMC-3xx counters!). Advanced analysis of the data now permits count rate histograms with Poisson fit for quality control of data, and FFT analysis for any periodic signal hidden within the data.
Advanced mission simulation and analysis tool
The Orbit Determination Toolbox (ODTBX) is developed by the Navigation & Mission Design branch at NASA Goddard Space Flight Center as an advanced mission simulation and analysis tool used for concept exploration, proposal, early design phase, and/or rapid design center environments. ODTBX functions and utilities are combined in a flexible architecture that allows for modular development of navigation algorithms and simulations. The core ODTBX functionality is realized through a set of estimation commands that incorporate Monte Carlo data simulation, linear covariance analysis, and measurement processing at a generic level.
An aquarium management software with a Simulation Model System
SME LibreAquarium is an Aquarium management system with a Simulation Model Engine (SME) that makes a prediction of the possible measurement values for the different pollutants that affect to these aquatics systems (NO3,PO4, Fe). The simulator consults the recorded analysis to calculate a prediction of the NO3, PO4, Fe, that the these aquatic system produce. It also uses a central (fish, plant and invertebrates) database to check if the actual parameters are Ok, depending on the species that live in the Aquarium. With all the records, the Simulation Model predicts the algae risk too (low,medium,high) and the algae type(green,cyanotic.) using the Redfield coefficient. Appart from that, the program tries to bring another modest contribution to Open Source Software and the World of Aquariums. SME LibreAquarium helps to daily maintenace of the aquarium with habitants control(fishes,plants, invertebrates), expenses, statistics, alarms, etc.
A modern SCADA HMI for substations and other automation applications
QXRD is software for the acquisition and analysis of X-ray data taken with 2 dimensional detectors. The software can drive a Perkin Elmer XRD series flat panel detector and can be remote-controlled via a socket interface, or directly from SPEC
Java Disk Benchmark Utility
Simple Java utility to help bench mark disk IO. Benchmark is done by creating and reading data files to a user directory that can be configured. Suggestions would be very appreciated. https://gitlab.com/jamesmarkchan/jDiskMark/ Note: When doing a combined read and write operation the disk cache is not cleared automatically so the app must be restarted to avoid the cache from affecting read IO performance.
An easy to install and use toolbox for octave for the calculation purpose of power system along with features like Economic load dispatch, load flow analysis, transmission line parameter and swing equation etc
This program written in Python is used for capture screenshot or raw data from a UNI-T digital storage oscilloscope.
PyRPL turns your Red Pitaya into a powerful analog feedback device.
The Red Pitaya is a commercial, affordable FPGA board with fast analog inputs and outputs. This makes it useful for quantum optics experiments, in particular as a digital feedback controller for analog systems. Based on the open source software provided by the board manufacturer, PyRPL (Python RedPitaya Lockbox) implements many devices that are needed for optics experiments with the Red Pitaya. PyRPL implements various digital signal processing (DSP) modules (see features below). It allows to arbitrarily interconnect the available DSP modules and retrieve signal values on timescales below 1 ms. The graphical user interface (GUI) provides a realtime display of the various measurement instruments and allows the easy configuration of DSP signal chains and feedback controllers. At the highest abstraction level, arbitrary feedback sequences can be defined to fulfill tasks as complex as approaching and locking a resonance of a high-finesse Fabry-Perot cavity (tested up to finesse=100,000).
pyOBD-II (a.k.a. "pyobd2") is a Python library for communicating with OBD-II vehicles. Its goal is to make writing programs for vehicle diagnostics and monitoring vehicle data as easy as possible. Relies on pySerial to communicate with ELM scanners.
A simple command line utility to produce an FFT/IFFT of ASCII data
Ever had a bunch of ASCII data that you would like to have a quick look at in frequency domain, but don't want to fire up some bulky analysis software package just for that? Well, I have... So I wrote this tiny tool. It is based on fftw (www.fftw.org) and boost's program options (boost.org). cli-fft is really simple: All it does is to receive ASCII data from a file or standard in, FFT it and write out the result into a file or to standard out.
Extract PPG signal from video image of the face
The application was designed for the real time contactless photoplethysmography of the human face by means of an ordinary webcam in ambient light environment System requirements: - AMD or Intel CPU with 2 cores and 2.6 GHz clock speed (or higher); - 512 Mb of RAM (or higher); - OS Microsoft Windows 10/8/7/XP, booth 32 and 64 bit versions; - A RGB webcam (Logitech B910 is the best choice).
a package with useful scripts for X-ray diffraction physicists
xrayutilities is a python package used to analyze x-ray diffraction data. It can support with performing diffraction experiments and used for common steps in the data analysis. It can read experimental data from several data formats (spec, edf, xrdml, ...); convert them to reciprocal space for arbitrary goniometer geometries and different detector systems (point, linear as well as area detectors); for further processing the data can be gridded (transformed to a regular grid). More detailed description as well as documentation can be found at webpage http://xrayutilities.sourceforge.io/. Downloads for windows can be found on http://pypi.python.org/pypi/xrayutilities Development is performed on github: https://github.com/dkriegner/xrayutilities
Drilling Calculator, Calculate all your drilling numerical with least effort and most accuracy! (for student purpose only, not professional usage). Application developed on C#. (c) 2011, Chiradeep Gupta; University of Petroleum and Energy Studies.