Free Video Projector/Monitor Calibration Software
Video Projector/Monitor Calibration Software orginally developed as ColorHCFR. This code base is based off version 2.1 and will aim for a more open development process. The opensource version integrates an ArgyllCMS interface for continued meter support and development. If you feel the program has been of value to you since I started working on it about 3 years ago please consider a contribution via the link below. Thanks! -zoyd https://www.paypal.me/zoyd
IEC 60870-5-104 protocol tester.
This software implements the IEC60870-5-104 protocol (client side) for substation data acquisition and control via tcp/ip network using the QT UI Framework. It can be compiled on Linux and Windows platforms. It's possible to poll and view data from the substation system (RTU/concentrator) and also send commands.
itom - an Open Source Measurement, Automation and Evaluation Software
itom is an open source software suite for operating measurement systems, laboratory automation and data evaluation. One main application of itom is the development and operation of sensor and measurement system for instance in a laboratory environment. Therefore, the software has to be able to communicate with a wide range of different hardware systems, such as cameras or actuators and should provide a diversified and as complete as possible set of evaluation and data processing methods. Additionally, the rapid prototyping of modern measurement and inspection setups requires a system, where parameters or components can easily be changed at runtime, necessitating the availability of an embedded scripting language. Finally, when operating a measurement system, it is also desirable to extend the graphical user interface by system adapted dialogs and windows. https://itom.bitbucket.io/
Profiling and analysis of laser beams with ImageJ
This open-source software enables profiling and analysis of laser beams. It can be used with a variety of cameras supported by ImageJ and Micro-Manager, or images from any other source. It provides all common analysis methods like D4Sigma, knife-edge, as well as fitting of Hermite-Gauss and super-Gauss functions.
jRCaLc is a program designed to aid you in working with resistors.
jRCaLc is a resistor calculator outfitted with various tools, meant to aid in work related to resistors.
A Crossplatform OpenGl Gui for a Accelerometer (via USART/Atmega).
pyOBD-II (a.k.a. "pyobd2") is a Python library for communicating with OBD-II vehicles. Its goal is to make writing programs for vehicle diagnostics and monitoring vehicle data as easy as possible. Relies on pySerial to communicate with ELM scanners.
Drilling Calculator, Calculate all your drilling numerical with least effort and most accuracy! (for student purpose only, not professional usage). Application developed on C#. (c) 2011, Chiradeep Gupta; University of Petroleum and Energy Studies.
Open Source Implementations for 3D-Surface Characterisation Algorithms according to ISO 25178 (Geometric Product Specification) in verifiable pseudocode (MATLAB). Implementation of an XML-based file exchange format according to upcoming ISO 25178-72.
Used to record and analyze some behavioural experiments in neuroscience (using usb webcam). it was developed in collaboration with neuropharmacology lab at Faculty of Medicine, Ain Shams University. it can use(JMF,OpenCV,JMyron & AGCamLib) for webcam
DRINKS is a set of smart web-based widgets.
Serial communication utility
COM Studio utility helps to develop and test a serial communication protocol for embedded application like USART or RS232. COM studio is a cross platform application developed on top of QSerial device using the QT library. With COM studio is possible to create a set of command frames to be sent to the COM port and decode the answers coming from the device. The serial protocol can be fully customized with a graphical user interface. This software is OPEN SOURCE and released under GPL license so you can feel FREE to use, copy, share, (but above all) to study, analyze and modify it as you like (within the terms of the license). If you like, hate or simply use this software, if you find any bug or have any request, please do not hesitate to let me know through the services offered by the site that hosts the project or through my Facebook page (http://facebook.com/koalakoker). And (if you think it's the case) do not hesitate to recommend the program to your friends.
calculating aspect ratio
Small tool for calculating the aspect ratio of a certain resolution
Simple Binary Clock
Simple Binary Clock
thermocouple voltages to temperatures converter
Heat Wizard converts thermocouple voltages to temperatures and back.
Speedway Control - Hardware supported time measurement, switching and management for Slotracing systems of any scale. Means indicating, evaluating and storing lap and/or sector times in selected or summarized running procedures.
Vlaxicon is an open-source tool for measurement instruments management. It allows remote control of various instruments such are Agilent generators and oscilloscopes, etc. It is lightweight alternative for Agilent VEE Pro software.
WindMeasuring is a handy and easy to use application designed to record data from Thies Clima ultrasonic anemometers. WindMeasuring displays information about the wind speed, direction and the virtual temperature. It features data logging of the saved data and uses COM port connections.
cdfread is a program for people wirking with mass spectrometry datasets. cdfread implements the routines to read mass spectra and mass chromatograms from data files in netCDF ("Andi-MS") format. Centroid and profile data are supported.
Linux and Windows utillity for Agilent U1230, U1240 and U1270 DMM
Command line utility for Agilent U1230, U1240 ans U1270 series digital multimeters (DMM). Both Linux and Windows are supported. So far only tested on U1252A, but the utillity do probably work with all the the following multimeters: Agilent U1231A, U1232A, U1233A, U1241A, U1242A, U1241B, U1242B, U1251A, U1252A, U1253A, U1251B, U1252B, U1253B, U1271A, U1272A, U1273A.
Rough internet speed testing tool (CLI)
This tool was intended to be run under OpenWrt (so it's small and has no dependencies) but it can be also built/run under most other *nixes and Windows. It's very easy to use, run it with -h or --help argument to see a brief howto. I hope someone finds it useful.