Portable, complete and BSD-licenced IEEE 1588 (PTP) implementation
The PTP daemon (PTPd) implements the Precision Time protocol (PTP) as defined by the IEEE 1588 standard. PTP was developed to provide very precise time coordination of LAN connected computers. PTPd boasts an advanced set of features and is highly configurable.
Profiling and analysis of laser beams with ImageJ
This open-source software enables profiling and analysis of laser beams. It can be used with a variety of cameras supported by ImageJ and Micro-Manager, or images from any other source. It provides all common analysis methods like D4Sigma, knife-edge, as well as fitting of Hermite-Gauss and super-Gauss functions.
Java Disk Benchmark Utility
Simple Java utility to help bench mark disk IO. Benchmark is done by creating and reading data files to a user directory that can be configured. Suggestions would be very appreciated. https://gitlab.com/jamesmarkchan/jDiskMark/ Note: When doing a combined read and write operation the disk cache is not cleared automatically so the app must be restarted to avoid the cache from affecting read IO performance.
pyOBD-II (a.k.a. "pyobd2") is a Python library for communicating with OBD-II vehicles. Its goal is to make writing programs for vehicle diagnostics and monitoring vehicle data as easy as possible. Relies on pySerial to communicate with ELM scanners.
itom - an Open Source Measurement, Automation and Evaluation Software
itom is an open source software suite for operating measurement systems, laboratory automation and data evaluation. One main application of itom is the development and operation of sensor and measurement system for instance in a laboratory environment. Therefore, the software has to be able to communicate with a wide range of different hardware systems, such as cameras or actuators and should provide a diversified and as complete as possible set of evaluation and data processing methods. Additionally, the rapid prototyping of modern measurement and inspection setups requires a system, where parameters or components can easily be changed at runtime, necessitating the availability of an embedded scripting language. Finally, when operating a measurement system, it is also desirable to extend the graphical user interface by system adapted dialogs and windows.
Data aquasition software for Thurlby DSA524
DSAquire allows you to download and plot trace data from a Thurlby DSA524 digital storage adaptor (it's a 25 year old instrument, but better late than never, eh?). The data is downloaded via an RS232 serial link using a null modem cable. You can export the plot as an image or export the data in real-world units as a csv file. This software runs under Linux and also under Windows XP and later using Cygwin. Pre-compiled binaries are supplied, as are full sources under the GPL. The interface of provided via FLTK. Also hosted here are the service and operators' manuals for this instrument, as well as dumps of the firmware from the EPROM. Many thanks to those who have preserved these for posterity (the 2.79 and 2.86 firmware dumps where generated by me - the rest has been collected from around the 'net).
Tcl binding to VISA API
Tcl binding to VISA (Virtual Instrument Software Architecture) API. It is linked to Tcl as a standard extension following Tcl Extension Architecture (TEA) conventions. See VISA specs. on IVI Foundation page: http://www.ivifoundation.org/specifications/default.aspx TEA specs. can be found here: http://www.tcl.tk/doc/tea/
A Crossplatform OpenGl Gui for a Accelerometer (via USART/Atmega).
Open Source Implementations for 3D-Surface Characterisation Algorithms according to ISO 25178 (Geometric Product Specification) in verifiable pseudocode (MATLAB). Implementation of an XML-based file exchange format according to upcoming ISO 25178-72.
instrument control, data acquisition display and analysis
Experix is a command-line driven environment for laboratory data acquisition and device control and graphical presentation and analysis of data. Written in C for GNU-Linux . Tested on PC and Raspberry Pi. The core is written very generally in order to support applications by means of script files. Device interfaces: PCMCIA daq (2 devices tested) via kernel module with interrupt handler and memory-mapped data; USB daq (1 device tested) using libusbx; running an equipment servicing program via pipes. Interfaces accessible via commands and scripts: file i/o modelled on stdio and stdlib; usb control and bulk transfers; socket operations; webcam; graphics via framebuffer. Applications (not all available yet for download) include: cell poker (like an atomic force microscope); tissue mechanical tester; fluorescence photobleaching; alternating laser excitation fluorescence; fluorescence intensity distribution analysis; iverilog simulation analysis.
Rough internet speed testing tool (CLI)
This tool was intended to be run under OpenWrt (so it's small and has no dependencies) but it can be also built/run under most other *nixes and Windows. It's very easy to use, run it with -h or --help argument to see a brief howto. I hope someone finds it useful.
ACCORD is a C library for composition of scanning electron or helium-ion microscope images with correction of drift. It produces significantly more accurate images than the traditional imaging techniques and also provides drift trajectories.
DRINKS is a set of smart web-based widgets.
A Gem Stone weight estimator/calculator for mounted gemstones in items of jewellery. Automatically selects from over 180 gemstones and most popular cuts for diamonds and coloured stones. GTK user interface
Injection Wizard is an application for injecting traffic into WEP protected Wi-Fi networks, like aireplay-ng, but it's much more easy to use and it can work with worse conditions.
LCDSpicer is a screen manager, for little LCD screens, writen in c++, can be used with LCDproc or others drivers. Using plugins you can show almost everything, like system information, music players, and computer health in general.
Mysql Veritabanı için bağlantı testti aracıdır.
Oracle MySql’ in ve MariaDb’ nin tüm versiyonlarında çalışması öngörülmektedir. Açık kaynaklı bir projedir.
Hantek DSO-2100 USB software for Linux
The Software for Controlling Testing Equipment - has been designed to automate data acquisition and equipment control. Written in Perl, uses the SCPI language to communicate with instruments via RS-232 (serial) or USB ports.
Speedway Control - Hardware supported time measurement, switching and management for Slotracing systems of any scale. Means indicating, evaluating and storing lap and/or sector times in selected or summarized running procedures.
TCP Experiment Automation Controlled Using Python
TEACUP automates many aspects of running TCP performance experiments in a specially-constructed physical testbed. TEACUP enables repeatable testing of different TCP algorithms over a range of emulated network path conditions, bottleneck rate limits and bottleneck queuing disciplines. TEACUP utilises a text-based configuration file to define experiments as combinations of parameters specifying desired network path and end host conditions. When multiple values are provided (e.g. for TCP congestion control algorithm), an experiment is made up of multiple tests. For each experiment and test, TEACUP collects a range of data, such as tcpdump files of traffic seen or TCP stack information (e.g. using Web10G). TEACUP also collects a variety of metadata from the end hosts and bottleneck router, such as the actual OS/kernel version(s) used. TEACUP also provides some simple tools for analysing the results of experiments, such as plotting a flow's experienced RTT over time.
The goal of this project is to develop a framework to test and measure the performance of IEEE 802.11 based devices. Currently we aims to address the issues related to protocol conformance testing for a device.
It is designed to monitor all the machines in the subnet automatically.
PK2Aux is a library and suite of command-line utilities for using the Microchip PICkit2 programmer device for purposes other than programming (such as the generic pin controls, serial UART, and logic analyzer modes provided by the Windows software).
Fortran codes for SCNURS method - Side Cut Non-Uniform Residual Stress
SCNURS - Side Cut Non-Uniform Residual Stress measurement method for plates, - is a destructive RS measurement method developed in Moscow, Russia and later in Bristol, UK. The method is specifically designed for the measurement of highly non-uniform RS fields, including discontinuities, in plates. This project collects all codes which implement forward and inverse solution to the RS problem. The codes are in modern Fortran with OpenMP. The codes are distributed under 2-clause BSD license. The code uses Lapack (http://netlib.org/lapack), Slatec (http://www.netlib.org/slatec) and CMLIB (http://gams.nist.gov/cgi-bin/serve.cgi/Package/CMLIB) libraries. All these libraries are available as packages on FreeBSD. Another project page: http://eis.bris.ac.uk/~mexas/scnursweb