MSGraph is a program designed for the interactive, fast, qualitative analysis of mass spectrometric (MS) data. It is a tool to provide fast and simple access to all the information contained in an LC/MS analysis run.
Mysql Veritabanı için bağlantı testti aracıdır.
Oracle MySql’ in ve MariaDb’ nin tüm versiyonlarında çalışması öngörülmektedir. Açık kaynaklı bir projedir.
This is a highly configurable and flexible testing tool capable of generating different streams of network packets based on set of parameters user provides, for performance & robustness testing on a NIDS - Network Intrusion detection System.
This project is designed to be able to take standard NMEA data available from most boats and broadcast APRS WX reports. Other telemetry like battery voltage, tank levels, etc, as well as data logging will be supported.
AFM puller control software
Nanopuller by Konrad Pawlak and Janusz Strzelecki http://dx.doi.org/10.1016/j.ultramic.2016.01.008 http://www.biofizyka.fizyka.umk.pl/ Laboratory made AFM force spectroscopy setups were present in milestone single molecule experiments and there is a growing number of groups using such equipment even though the commercial setups are nowadays widely available. The ability to tailor the setup accordingly to particular application is an advantage that makes the effort necessary for construction a worthy investment. However, one advantage of using a commercial setup – repeatability and unification, cannot be archived, as every laboratory is developing a specific data acquisition protocol and software. Our Nanopuller software (open ISC license) presented here is intended to eliminate this obstacle. We give access to a program, which with only a minimum effort can be adjusted for vast array of typical equipment.
Simple tool to display network traffice
NetworkSpeed displays live network traffice. User can select interface to display. There are 2 variations of this app : - NetSpeed (NET framework 2, WinForms) - NetworkSpeed (.NET framework 4, WPF) The WPF variant (NetworkSpeed) is still in development.
Numbat in a simulation environment for mobile WiMAX (IEEE 802.16) networks supporting mobility and IPv6. Focus of this environment is to analyze handovers and mobility related issues in a complicated WiMAX/IPv6 stack.
A set of tools/framework for numerical experiments management. Nemsys requires only minor changes in existing programs/tools/scripts. Strongly based on POSIX systems features.
More features than pktgen on Linux with a CWorthy interface. Builds on Linux kernels 2.6.28 and above. Provides packet generation for network testing. See the README.
OpenPMU is a collaborative project developing a software defined Phasor Measurement Unit for Smart Grids and electrical utilities. This project is currently hosted by Queen’s University Belfast.
Combining panoramic photographs with 3D landscape models
PanoPhoto is intended to combine panoramic photos made on the Moon and compare resulting panorams with 3D models of the Moon surface. Language is Russian. Комбинирует панорамные фотографии, сделанные (в основном) на Луне и позволяет сравнить полученную панораму с 3D-моделью лунной поверхности.
Generates synthetic medical image time series data from ground truth.
A flexible and extensible application for generating synthetic medical image time series data from known ground truth. Includes anatomy, signal generation and physiology modules. Currently the modules for dynamic contrast-enhanced MRI, diffusion weighted imaging, the variable flip angle and inversion recovery T1 mapping techniques have been implemented.
Python, Physics, PyQt, Software, Data adquisition, Spectroscopy, UV
Como técnico en informática en un Instituto de Física con el tiempo surgió la necesidad de tener que crear distintas piezas de software para ir resolviendo situaciones diarias. En este proyecto iré agregando pequeños programas en Python 2.7 que voy escribiendo para dar soluciones a algunos de los problemas que surgen día a día en el laboratorio, como ser comunicación con algunos dispositivos o rutinas para ordenar o modificar datos de forma recursiva algunos cálculos matemáticos, creación de gráficas etc. La finalidad principal del proyecto es poder poner a disposición de aquel que lo necesite mi trabajo tanto dentro del Instituto donde trabajo como fuera del mismo. Asi como tambien recibir la mayor cantidad de criticas, consejos e ideas posibles para poder mejorar mi trabajo. Podrán ver que parte de los programas están mas documentados que otros tratare de ir poniéndome al día comentando el código y escribiendo la documentación de los distintos scripts.
The PlanetLab Visualizer is intended to help users to run their experiments on PlanetLab hosts. The main advantages are the ease of use and the support for Linux and Windows OSes.
Monitor, Log, and Control Press Systems
PressMAN(TM) Press Monitoring System is a data acquisition system for monitoring press variables such as internal mat temperature and gas pressure, platen position and hydraulic pressure. Various models of PressMAN(TM) systems have been installed in mills worldwide. Features AITF's PressMAN(TM) systems include specially designed temperature and pressure probes for measuring internal mat temperature and gas pressure during pressing. PressMAN(TM) is a useful tool for developing and optimizing pressing schedules, adjusting closing parameters to improve heat transfer to the core and minimize air entrapment; adjusting decompression to reduce blows or decrease the decompression time. PressMAN(TM) provides the information needed to adjust parameters in real-time to ensure the best product quality with optimal use of fibre and adhesives. Set-up and training is provided at cost in your mill.
This is an improved version of logprotek.c. It logs and time stamps the readings from a Digital Multimeter, the Protek 6500 AC. It uses blocking I/O and covers most of the DMM modes. It works in Ubuntu 10.04 LTS.
A generic, vendor-independent open-source application to determine the performance of a pub-sub infrastructure.
Python library for fab/lab control
Allows one to program fablab (factory and/or laboratory) in the same way as we program computer. Imagine commands like: "dim screw12 as new screw" or "mold(form_piston_081212, brass)" or ''gear(3)=lasercut(steel2,"biggear.gc")". This approach will let us program highly automated and self-deploying or even self-replicating factories. I am more engineer than programmer and just beginner in python. So it looks like community help will be needed :)
A scientific data plotting program.
QSciPlot is a gnuplot frontend that helps you recording scientific data and plotting it. It is intended to offer similar functionality to IGOR Pro, qtiplot, etc.
QTLab is a ipython-based measurement environment.
Radio Active Sample Changer Any Location
RSSceSim - Reputation System Scenario Simulator
RSSceSim is a simple and easy to extend simulation tool for reputation models that can be used for testing, comparing and benchmarking reputation system metrics under specific scenarios.
RTAI-XML is a server component of the Real Time Application Interface (RTAI) project, implementing a service oriented way to design and develop Real Time (RT) control applications.