Free Video Projector/Monitor Calibration Software
Video Projector/Monitor Calibration Software orginally developed as ColorHCFR. This code base is based off version 2.1 and will aim for a more open development process. The opensource version integrates an ArgyllCMS interface for continued meter support and development. If you feel the program has been of value to you since I started working on it about 3 years ago please consider a contribution via the link below. Thanks! -zoyd https://www.paypal.me/zoyd
OpenHantek is a free software for Hantek (Voltcraft/Darkwire/Protek/Acetech) USB DSOs based on HantekDSO. The UI is written in C++/Qt 4 and uses OpenGL to draw the graphs. It was tested with the DSO-2090, test results with other models are welcome.
PLC-Logger and Analyzer
Use PLC-logger to store and analyze data from almost every PLC-system. The following PLC-Systems are accessible: - Every PLC-System running a Modbus-TCP / Modbus-UDP Server - Siemens S7 via IBH NetLink - Siemens S7 with Ethernet-Interface - Codesys-based PLC-Systems - via OPC-Servers V0.61: - Bugfixes V0.60: - Some Bugfixes - Some data evaluation V0.59: - Modbus TCP Server Simulator supports Modbus UDP - Possibility to set bookmarks V0.57: - Modbus UDP supported - Edit configuration from connection-manager - Configuration keeps selected after starting or stopping V0.56 HF1: - Bugfix executing EasyModbusTCP Server Simulator V0.56: - Integration of EasyModbusTCP Server Simulator in "Tools"-Menue - Improvements in Modbus-Connection Wizard - Modbus Addresses shifted by (-1) to meet Modbus specification
Open Factory 3D is a free factory design application that helps you to place your machines and factory equipment on a factory 2D plan, with a 3D preview.
itom - an Open Source Measurement, Automation and Evaluation Software
itom is an open source software suite for operating measurement systems, laboratory automation and data evaluation. One main application of itom is the development and operation of sensor and measurement system for instance in a laboratory environment. Therefore, the software has to be able to communicate with a wide range of different hardware systems, such as cameras or actuators and should provide a diversified and as complete as possible set of evaluation and data processing methods. Additionally, the rapid prototyping of modern measurement and inspection setups requires a system, where parameters or components can easily be changed at runtime, necessitating the availability of an embedded scripting language. Finally, when operating a measurement system, it is also desirable to extend the graphical user interface by system adapted dialogs and windows.
Measurement and Automation
"MeaProcess - Realtime" is a measurement and automation framework.
FCUtilsLibrary provides a collection of functions to communicate and control Danfoss frequency converters. One of the main targets is, to create an “easy to use” library which is independent from the operation system and the physical network.
Log and evaluate data from your smartphone and OBD
iTLogger is the result of a software project at TU Ilmenau in 2012. Its aim was to create an app and corresponding desktop programm, so that people could track their journey on forest roads and later evaluate the data on their desktop. With the logged data you can evaluate the quality of forest roads. Available on Google Play: https://play.google.com/store/apps/details?id=de.tui.itlogger
calculating aspect ratio
Small tool for calculating the aspect ratio of a certain resolution
BMI Wizard calculates the body mass index (BMI)
BMI Wizard calculates the body mass index (BMI) from weight and size and vice versa.
Process data logging service
The Data Logging Service (DLS) is a data logging system for EtherLab, that is capable of collecting, compressing and storing high-frequency realtime data. The goal is, to allow the user unlimited and performant access to the stored data. A signal overview over a year is retrieved as fast as a tiny signal fluctuation, that happened in a fraction of a second.
Wurde im Zuge einer Vorlesungsveranstalltung erstellt und wird je nach Zeit weitergeführt. Grund für das "veröffentlichen" war dass das Arbeitsteam eine einfache Möglichkeit zur Synchronisierung findet.
thermocouple voltages to temperatures converter
Heat Wizard converts thermocouple voltages to temperatures and back.
Data logging and visualization in 2D and 3D for STMs.
This is a project we - ten students, 16 to 18 years old, and one teacher - are currently working on in the so called "Physik-Projektkurs" at school in which we build and program our own scanning tunneling microscope. This software is designed for DAQ systems by BMCM (we use the USB-AD16F), but it should not be too difficult to adapt it to foreign systems.It currently supports resolutions up to 1024x1024, visualization in 2D and 3D using colors from predefined gradients, export to PNG, CSV, OBJ and more! Requires at least .Net Framework 4.0, DirectX 9, optional: BMCM driver for your DAQ system
Monitor, Log, and Control Press Systems
PressMAN(TM) Press Monitoring System is a data acquisition system for monitoring press variables such as internal mat temperature and gas pressure, platen position and hydraulic pressure. Various models of PressMAN(TM) systems have been installed in mills worldwide. Features AITF's PressMAN(TM) systems include specially designed temperature and pressure probes for measuring internal mat temperature and gas pressure during pressing. PressMAN(TM) is a useful tool for developing and optimizing pressing schedules, adjusting closing parameters to improve heat transfer to the core and minimize air entrapment; adjusting decompression to reduce blows or decrease the decompression time. PressMAN(TM) provides the information needed to adjust parameters in real-time to ensure the best product quality with optimal use of fibre and adhesives. Set-up and training is provided at cost in your mill.
A scientific data plotting program.
QSciPlot is a gnuplot frontend that helps you recording scientific data and plotting it. It is intended to offer similar functionality to IGOR Pro, qtiplot, etc.
For starters a DirectX (Direct3D-Panel) A suite to display simple x/y/measurements, which has to be fast, because those analogue position encoders never "rest" at the same position and we want to see our table-position in realtime (mswin-realtime)
openmsr is a collection of tools around Instrumentation,Control and Automation ( ICA ). It runs under the following OS: Windows, Linux and Mac OSX. Ther are tools like digital simulation, object recognition, SoftPLC. Tools Messen,Steuern und Regeln