Serial Bootloader for Microchip, Atmel, NXP, TI, 8051 microcontrolers
What is it? It's a Bootloader for Microchip, Atmel, NXP, TI and 8051 devices. A Bootloader is a firmware running in the microcontroler device which allows the user to send it's own firmware without the need of a programmer. This Bootloader consists of: - firmwares for many devices (this firmware need to be send to the device's flash memory with a programmer, only once) - a PC software which communicates with the bootloader firmware in the device and send the user's program in its memory Where does it come from? This Bootloader is based on "Tiny PIC Bootloader" made by Claudiu Chiculita. A special THANK to him!!! What can it do? It can program: - Microchip PIC10/12/16/18/24/32/dsPIC30/33 - Atmel ATtiny, ATmega - TI MPS430 - NXP ARM Cortex-M0+ - Silicon Labs C8051 And this: - with light modifications to the Bootloader firmware for new devices - without modifying your source code or using a special linker script - via GUI or command line prog - with automatic Reset
Reads & plots waveform files that use the Tektronix '.ISF' format.
This application reads in and plots scope waveform files that use the Tektronix '.ISF' format. The '.ISF' binary format file is created when channel waveform data is saved out of an oscilloscope. Either drag&drop the '.ISF' files into the grid OR use the 'File Open' menu selection. Once all the ISF files are in the grid, enter the percent (starting from the beginning) to plot into the '% to plot' column in the grid. Then press the 'Plot Data' button to render the waveforms.
Data logging and visualization in 2D and 3D for STMs.
This is a project we - ten students, 16 to 18 years old, and one teacher - are currently working on in the so called "Physik-Projektkurs" at school in which we build and program our own scanning tunneling microscope. This software is designed for DAQ systems by BMCM (we use the USB-AD16F), but it should not be too difficult to adapt it to foreign systems.It currently supports resolutions up to 1024x1024, visualization in 2D and 3D using colors from predefined gradients, export to PNG, CSV, OBJ and more! Requires at least .Net Framework 4.0, DirectX 9, optional: BMCM driver for your DAQ system