Free Video Projector/Monitor Calibration Software
Video Projector/Monitor Calibration Software orginally developed as ColorHCFR. This code base is based off version 2.1 and will aim for a more open development process. The opensource version integrates an ArgyllCMS interface for continued meter support and development. If you feel the program has been of value to you since I started working on it about 3 years ago please consider a contribution via the link below. Thanks! -zoyd https://www.paypal.me/zoyd
Oscilloscope application for Arduino & .NET. Includes full source code. Version 2 features sampling rate x10.
Serial Bootloader for Microchip, Atmel, NXP, TI, 8051 microcontrolers
What is it? It's a Bootloader for Microchip, Atmel, NXP, TI and 8051 devices. A Bootloader is a firmware running in the microcontroler device which allows the user to send it's own firmware without the need of a programmer. This Bootloader consists of: - firmwares for many devices (this firmware need to be send to the device's flash memory with a programmer, only once) - a PC software which communicates with the bootloader firmware in the device and send the user's program in its memory Where does it come from? This Bootloader is based on "Tiny PIC Bootloader" made by Claudiu Chiculita. A special THANK to him!!! What can it do? It can program: - Microchip PIC10/12/16/18/24/32/dsPIC30/33 - Atmel ATtiny, ATmega - TI MPS430 - NXP ARM Cortex-M0+ - Silicon Labs C8051 And this: - with light modifications to the Bootloader firmware for new devices - without modifying your source code or using a special linker script - via GUI or command line prog - with automatic Reset
Microcontroller based PC Oscilloscope
PPMScope is a do-it-yourself oscilloscope with an open source design. The intent is that the project can be constructed by an electronics hobbiest using the instructions included. The design is a compromise between features and cost. The bandwidth is lower than a commercial scope, so it's use is limited to signals of 500 kHz and below. It's sample buffer is also smaller than a commercial scope, however sufficient for most oscilloscope functions. This is a version based on the PIC16F877A microcontroller running with a 20MHz clock. The maximum sampling rate is 1 MHz with a 5 Mhz equivalent sampling mode. Currently, the computer interface supports USB, serial, and parallel ports. Good luck on the construction and I hope you enjoy your oscilloscope. I am happy to answer any questions or provide technical support for this design.
PyRPL turns your Red Pitaya into a powerful analog feedback device.
The Red Pitaya is a commercial, affordable FPGA board with fast analog inputs and outputs. This makes it useful for quantum optics experiments, in particular as a digital feedback controller for analog systems. Based on the open source software provided by the board manufacturer, PyRPL (Python RedPitaya Lockbox) implements many devices that are needed for optics experiments with the Red Pitaya. PyRPL implements various digital signal processing (DSP) modules (see features below). It allows to arbitrarily interconnect the available DSP modules and retrieve signal values on timescales below 1 ms. The graphical user interface (GUI) provides a realtime display of the various measurement instruments and allows the easy configuration of DSP signal chains and feedback controllers. At the highest abstraction level, arbitrary feedback sequences can be defined to fulfill tasks as complex as approaching and locking a resonance of a high-finesse Fabry-Perot cavity (tested up to finesse=100,000).
Tool for Wide Area Measurement System
iPDC is a free Phasor Data Concentrator that collects data from PMUs, and PDC/iPDC that are IEEEC37.118 Synchrophasors std compliant. iPDC do the time sequencing and combining of the received data as per IEEEC37.118 and send to other iPDCs, and applications on request. iPDC is able to archive the received data in the MySQL database on local/remote machine. PMU Simulator is also IEEEC37.118 std compliant. Software is built to be working on Linux platform.
The project offers support for NTC thermistor calculations. The Steinhart-Hart equation is a mathematical model for these thermistors. Software to calculate the coefficients based on temp-resistance tables and functions allowing conversion are provided.
Toolchain for quantification of fluorescence intensity and morphological parameters in single cells using microscope based cytometry.
The sigrok project aims at creating a portable, cross-platform, Free/Libre/Open-Source signal analysis software suite that supports various device types, such as logic analyzers, MSOs, oscilloscopes, multimeters, LCR meters, sound level meters, thermometers, anemometers, light meters, dataloggers, function generators, power supplies, GPIB interfaces, and more.
This project shows how to make a device that, through the PC USB interface, allows data acquisition from the peripherals of a microcontroller and managing devices TWI or I2C. It can be used on Linux and Windows without any additional driver.
Linux and Windows utillity for Agilent U1230, U1240 and U1270 DMM
Command line utility for Agilent U1230, U1240 ans U1270 series digital multimeters (DMM). Both Linux and Windows are supported. So far only tested on U1252A, but the utillity do probably work with all the the following multimeters: Agilent U1231A, U1232A, U1233A, U1241A, U1242A, U1241B, U1242B, U1251A, U1252A, U1253A, U1251B, U1252B, U1253B, U1271A, U1272A, U1273A.
A memory device programmer (Flash / EPROM / E2PROM) board and software, connected to PC by USB port. Placa e software para gravação de memórias (Flash / EPROM / E2PROM), conectada ao PC através de porta USB.
Open Source Implementations for 3D-Surface Characterisation Algorithms according to ISO 25178 (Geometric Product Specification) in verifiable pseudocode (MATLAB). Implementation of an XML-based file exchange format according to upcoming ISO 25178-72.
Libraries, documentation, examples & drivers for Eagle Technology South Africa's Data Acquisition products. These include ISA, PCI, PCI Express, USB, Serial & Ethernet. Supported languages will be C/C++, JAVA, Perl, Python.
This desktop application provides graphical control of K8055, a USB Experiment Interface Board by Velleman (http://www.velleman.eu/). It will be mostly platform-independend at a later time. The current (beta) version is for windows 2000/XP/Vista/7 on 32Bit. It is incompatible with all other Operating Systems and with 64Bit architecture. I stopped developing this application. Feel free to reuse the code or contact me on Questions.
Distributed Network emulation tool for high rate packet
I need your help: In order to make this framework easier and more useful, I need your contribution. The idea behind this framework is to develop a GUI like GNS3 and make this framework more stable. So if you are interested and have C/C++ programming skills, please contact me at firstname.lastname@example.org This framework allows to emulate a network by managing ethernet packets coming from two kind of interfaces: UDP and virtual network card. This tool is similare to dynamips (GNS3) but it can manager a higher packet rate. It can help to study DDoS attacks based on Botnet using the Lightweigth C++ Virtual Machine (LwCVM) in order to emulate Bots. This project is based on the following projects and libraries: LightweighIP of the TCP/IP stack pthread libpcap for communication with virtual machines dynamips Linux MicroCore
OM Open-source multimeter is a hobby project of mine which is intended to do a multimeter's job and measure volt,ampere,ohm,capacitance and ... . the features would be high precision,plotting,computer connectivity,and of course being open source.
Refactored BLT Components (RBC), includes data vectors and graph widgets for developing line and bar graph applications in Tcl/Tk.
a package with useful scripts for X-ray diffraction physicists
xrayutilities is a python package used to analyze x-ray diffraction data. It can support with performing diffraction experiments and used for common steps in the data analysis. It can read experimental data from several data formats (spec, edf, xrdml, ...); convert them to reciprocal space for arbitrary goniometer geometries and different detector systems (point, linear as well as area detectors); for further processing the data can be gridded (transformed to a regular grid). More detailed description as well as documentation can be found at webpage http://xrayutilities.sourceforge.io/. Downloads for windows can be found on http://pypi.python.org/pypi/xrayutilities Development is performed on github: https://github.com/dkriegner/xrayutilities
Open source data logger focused on the wind industry. Hardware platform based on the TI MSP430, firmware written in C using mspgcc. Sponsored by the Wind Energy Center at the University of Massachusetts, Mechanical and Industrial Engineering.
The data elaborator is a new project to manage scientific data
This program can make histograms, table and graphics of datas, study the error propagation during a measure, it is usefull if you have to do study errors propagations. The output are latex files, so it is easy for you just put them into your relations.
The libbuspirate is a C library to talk with the bus pirate hardware (http://dangerousprototypes.com/docs/Bus_Pirate) in raw, binary scripting mode. The libbuspirate allows to quickly write a short C program to test interfacing with your favorite hardware. The library has mainly be used to interface through SPI with RF transceivers such as CC2500, MRF24J40, Ethernet controller such as ENC28J60, EEPROMs such as 24C02, 24FC1025, LCD display (PCD8544 / Nokia5110), LED display (HT1632), ... Example source code to talk with this hardware is provided.
ACCORD is a C library for composition of scanning electron or helium-ion microscope images with correction of drift. It produces significantly more accurate images than the traditional imaging techniques and also provides drift trajectories.
Circuit Analyzer is a usb oscilloscope and signal generator. It is based on a dsPIC, and it is intended to be low cost.
Electronics schematics, PCB images, firmware and documentation to create and deploy a network of ecology related sensors.