IEC 60870-5-104 protocol tester.
This software implements the IEC60870-5-104 protocol (client side) for substation data acquisition and control via tcp/ip network using the QT UI Framework. It can be compiled on Linux and Windows platforms. It's possible to poll and view data from the substation system (RTU/concentrator) and also send commands.
Profiling and analysis of laser beams with ImageJ
This open-source software enables profiling and analysis of laser beams. It can be used with a variety of cameras supported by ImageJ and Micro-Manager, or images from any other source. It provides all common analysis methods like D4Sigma, knife-edge, as well as fitting of Hermite-Gauss and super-Gauss functions.
This LabView project includes a Web Service (WS) and website interface hosted by a LabView server. The WS and website allow clients to acquire measurements from instruments remotely in real time, using standard browsers (e.g. iPhone) without plugins.
DVB translator is a tool which allows analyses of transport stream packets
jRCaLc is a program designed to aid you in working with resistors.
jRCaLc is a resistor calculator outfitted with various tools, meant to aid in work related to resistors.
An easy-to-use timer to facilitate complex, multi-step protocols.
ExpTimer is developed as an easy-to-use timer to facilitate complex, multi-step experimental protocols. The advantages of ExpTimer are that it takes away the fiddling around with typical lab timers, which have to be reset after each action, and at the same time it shows you what to do next. You just enter your own protocol, press “start” and you do not have to worry about timers anymore, especially when you already have your hands full with your protocol. If something goes wrong during your experimental procedure, just press “pause” (to pause the timer) or “reset” (to start all over again). Of course, the program has a much broader area of application than experiments only.
an CSV / ASCII Data Log file converter.
DataLogChanger can be used to convert huge ASCII Data Log files (i.e. .CSV format) into a format for further use in other tools. I started to invent this tool when I wanted to use 4Gigasamples Oscilloscope log files for plotting and as PWL input in SPICE simulations. It was impossible due to the filesize and resolution. * in- and output file size is virtually unlimited * very fast (>100k lines per second processing speed) * Easy selection of source file name * Selectable destination filename suffix * Automatic header recognition * Automatic time offset recognition (e.g. SPICE only accepts poitive time values) * Selection of a single or all Columns * Selection of a time or line range to be converted * Reduction of time resolution (by skipping lines) * Separate Offset and Gain calculation for time and values
Rough internet speed testing tool (CLI)
This tool was intended to be run under OpenWrt (so it's small and has no dependencies) but it can be also built/run under most other *nixes and Windows. It's very easy to use, run it with -h or --help argument to see a brief howto. I hope someone finds it useful.
Tester le débit et le ping de votre ligne ADSL
Eco-Car is an easy and fast solution to spend less and understand how much can cost a journey!
thermocouple voltages to temperatures converter
Heat Wizard converts thermocouple voltages to temperatures and back.
Multithreaded & OO NIST Statistical Test Suite (C++ version)
This project is a Multithreaded & OO C++ version of NIST Statistical Test Suite which has been developed by Juan Soto in 1999. This is object oriented so that you can use it easily in your programs. Also you can use the power of parallelism cause it is multithreaded. Enjoy it!
Performance Test of CPU with make HD video smoother. It based on motion vectors searching and new motion-compensated frames calculation. Smooth factor by 2x and 2,5x. This task has good scalability. All cores of CPU are used.
Asterix UDP multicast recorder
This program is capable of subscribing to an UDP multicast feed containing (live) radar data in Eurocontrol Asterix format. The received UDP frames are stored in a recording file. A new (raw) Asterix recording file can be created every x minutes. The previously recorded Asterix filename contains date and timestamp. This tool can be used to do continuous 24/7 Asterix multicast recordings.
The SmileyBitmap class is responsible for producing a user controlled Bitmap of 10x10 randomly distributed happy and sad smiley faces.
WindMeasuring is a handy and easy to use application designed to record data from Thies Clima ultrasonic anemometers. WindMeasuring displays information about the wind speed, direction and the virtual temperature. It features data logging of the saved data and uses COM port connections.
Program to fetch datas from YC-7x7 dataloggers from YCT
We needed a datalogger, we found one. But the supplied VB6 program was very crappy, _really_ unusable, even on old XP machines. So I did mine, able to run under windows and linux. All the fun was to reverse the (binary) RS232 protocol. Our is a YC-727D with 2 thermocouple inputs, but the protocol is the same for 1, 2, 3 or 4 inputs models (YC-717, YC-727, YC-737, YC-747). Bytes orders needs to be checked for 3th and 4nd channels tough.
cdfread is a program for people wirking with mass spectrometry datasets. cdfread implements the routines to read mass spectra and mass chromatograms from data files in netCDF ("Andi-MS") format. Centroid and profile data are supported.
LabVIEW-Projekt zur Frequenzgangmessung
LabVIEW-Projekt zur Frequenzgangmessung, für National Instruments LabVIEW 7.1.1 Benötigte Software: - National Instruments „LabVIEW 7.1.1 für Windows“, http://www.ni.com - Microsoft GW-Basic ( z.B. Commodore GW-Basic ) für MSDOS - Hardware-Treiber, im Verzeichnis „drivers“ mitgeliefert Inhalte des Projekts - Digitalmultimeter mit Microsoft GW-Basic Programm testen - Anbindung eines Funktionsgenerators an LabVIEW - Anbindung von Digitalmultimetern an LabVIEW - Anpassung der Vorlage zu einer funktionstüchtigen Labview-Anwendung „Voltcraft_Frequenzgang.vi“ - Ausführung der Frequenzgangsanalyse - Darstellung eines Frequenzgangs mit Labview Zur Projekt-Ausführung ist die LabVIEW-Datei „Voltcraft_Frequenzgang.vi“ in LabVIEW 7.1.1 zu laden und dann auszuführen. Copyright 2005-2015 Rolf Hemmerling, Bernd Böttcher. Licensed under the Apache License, Version 2.0
This software is a zip file of a web site to easily design rc airplanes