CSV Comparator is a tool for comparing files which contain CSV-Data.
CSV Comparator is a tool for comparing files which contain CSV-Data. It was created for performance engineers to be able to have a easy way to compare data from two testruns and be able to automate the comparing process of various files with scripts. There is a command line tool as well as a user interface. In case you need to compare .xml-Files you can convert them to .csv-Files with my other project CSV Transformer. The advantages by using CSV as input and output are the following: - Many applications allow an export of its data to CSV or Excel(were it could be saved to CSV) - It is possible to pre- and postprocess the data, e.g removing version numbers before comparing - It is easy to create CSV data from logfiles and other resources by using unix tools like sed or awk - CSV can be loaded into other applications, especially Excel, were it can be formatted by macros for analyzing.
Serial Bootloader for Microchip, Atmel, NXP, TI, 8051 microcontrolers
What is it? It's a Bootloader for Microchip, Atmel, NXP, TI and 8051 devices. A Bootloader is a firmware running in the microcontroler device which allows the user to send it's own firmware without the need of a programmer. This Bootloader consists of: - firmwares for many devices (this firmware need to be send to the device's flash memory with a programmer, only once) - a PC software which communicates with the bootloader firmware in the device and send the user's program in its memory Where does it come from? This Bootloader is based on "Tiny PIC Bootloader" made by Claudiu Chiculita. A special THANK to him!!! What can it do? It can program: - Microchip PIC10/12/16/18/24/32/dsPIC30/33 - Atmel ATtiny, ATmega - TI MPS430 - NXP ARM Cortex-M0+ - Silicon Labs C8051 And this: - with light modifications to the Bootloader firmware for new devices - without modifying your source code or using a special linker script - via GUI or command line prog - with automatic Reset
Reads & plots waveform files that use the Tektronix '.ISF' format.
This application reads in and plots scope waveform files that use the Tektronix '.ISF' format. The '.ISF' binary format file is created when channel waveform data is saved out of an oscilloscope. Either drag&drop the '.ISF' files into the grid OR use the 'File Open' menu selection. Once all the ISF files are in the grid, enter the percent (starting from the beginning) to plot into the '% to plot' column in the grid. Then press the 'Plot Data' button to render the waveforms.
FahrenheitToCelsius is a free, open source temperature converter.
FahrenheitToCelsius allows you to convert temperature, easily and quickly on Windows PC's without installing any software, purchasing any "apps" or receiving any crap-ware. It's simple, easy to use and to the point, most importantly though it's free and open source.