Serial Bootloader for Microchip, Atmel, NXP, TI, 8051 microcontrolers
What is it? It's a Bootloader for Microchip, Atmel, NXP, TI and 8051 devices. A Bootloader is a firmware running in the microcontroler device which allows the user to send it's own firmware without the need of a programmer. This Bootloader consists of: - firmwares for many devices (this firmware need to be send to the device's flash memory with a programmer, only once) - a PC software which communicates with the bootloader firmware in the device and send the user's program in its memory Where does it come from? This Bootloader is based on "Tiny PIC Bootloader" made by Claudiu Chiculita. A special THANK to him!!! What can it do? It can program: - Microchip PIC10/12/16/18/24/32/dsPIC30/33 - Atmel ATtiny, ATmega - TI MPS430 - NXP ARM Cortex-M0+ - Silicon Labs C8051 And this: - with light modifications to the Bootloader firmware for new devices - without modifying your source code or using a special linker script - via GUI or command line prog - with automatic Reset
Moved to https://github.com/rdiankov/openrave An open-source, cross-platform, plugin-based robot planning environment for autonomous robotics. Includes services like collision detection, physics, (inverse) kinematics, sensors, robot controls, python bindings, and a network scripting environment.
An eclipse plugin for the openCONFIGURATOR configuration tool
Eclipse update site: http://sourceforge.net/projects/eclipse-plugin.openconf.p/files/update-site/ KNOWN ISSUE WITH THE UPDATE SITE DUE TO SOURCEFORGE ENCRYPTION POLICIES: If you experience problems with the SSL handshake during update please refer to http://gnuarmeclipse.github.io/blog/2017/01/29/plugins-install-issue/ Install via Eclipse marketplace: https://marketplace.eclipse.org/content/ethernet-powerlink-openconfigurator The project provides a plugin for the openCONFIGURATOR core library enabling the creation and configuration of a POWERLINK network (http://www.ethernet-powerlink.org/) in the Eclipse IDE (https://www.eclipse.org). Step-by-step video tutorials: Part 1 - Setup - https://goo.gl/l7eTrC Part 2 - RMN configuration - https://goo.gl/hHY12A Part 3 - PDO mapping - https://goo.gl/8gsRPq Part 4 - Parameter configuration - https://goo.gl/Xjuqjz Part 5 - Modular CN - https://goo.gl/PGCgCk Part 6 - Firmware Handling - https://goo.gl/yBn7ph
Simox has moved to gitlab. Please update your URLs: https://gitlab.com/Simox/simox A platform-independent robot simulation, motion and grasp planning toolbox consisting of three modules: VirtualRobot to simulate and visualize robots, Saba the sampling-based motion planning library and GraspStudio for grasp planning.
This project's aim is to build a 3D simulation environment to control a hexapod, and communicate serially to said hexapod when connected. This way new motion algorithms can be perfected without damaging your robot.
This project introduces sample programs of the URG library. Applications using URG and URG library are also introduced here. URG is Scanning Laser Range Finder of Hokuyo Automatic Co., for robots, autonomous systems and security systems.
It basicly spams whatever text.
There is 4 collons where you can write some text, and when you click spam the text you wrote will be spammed to whatever text thingy you have like skype.
Adaptive mobile robot controlled by hand movement and sound commands
Control system for skillful robot : Windows / language C# / libraries used in the project (Emgu CV, System.Speech, System.Threading, System.IO) Adaptive intelligent mobile robot and is controlled by the movement of the hand (via the camera) and by voice commands the control program use new technologies and offer new and cheap way to control remote without extra devices like 'kinect' In hardware part I have adopted simplicity on the idea and the goal was access to a flexible structure easily adjustable so I used meccano pieces.
A software for ATM telescope automation
SoundStepper is a "100% software" telescope controller, for Windows, using audio hardware to control step motors at real time. All it requires to operate are external step motor drives, which can be a commercial "pulse/direction" drive or analog current amplifiers. Documentation: http://soundstepper.sourceforge.net/
A virtual scanner for 3D models.
A virtual scanner that converts 3D models (in Wavefront .obj format) into pointcloud files (in PCL .pcd format). Useful for simulating robotic input. NOTE: This project has been merged into the project at https://github.com/canderegg/cfg_obj
iSpike is a spiking neural interface between the iCub humanoid robot and a spiking neural simulator such as NeMo.The system aims to provide an interface for the iCub that provides as biologically realistic spike trains from its senses as possible.
MIT's spacecraft simulator for control algorithm development
The SPHERES simulation is designed to support most software-related aspects of single- and multi-satellite SPHERES operations. The simulation code base consists of simulated versions of most of the SPHERES core flight code and additional code that simulates dynamics, communications, and other environmental interaction. The simulation is particularly valuable during the early stages of algorithm development and implementation as an aid in accelerating the learning curve for any Guest Scientist for SPHERES. Algorithms may be implemented in C or Embedded MATLAB and executed in the MATLAB simulation environment to verify general desired behavior. With some limitations, the code used in the simulation can be directly transferred to the SPHERES hardware. We are sharing this project with the public to gather more interest for SPHERES Guest Scientists. Feel free to use and contribute to this code base, just don't forget to credit the MIT Space Systems Lab if you distribute any results.
Easy Step Drive direction tool (WndLpt Tool)
Use LPT port pins 2, 3, 4, 5 for stepdrive driver connection.
Library for calculating model jet engines
This experimental library/framework for base and advanced engine calculation and simulation(in future)
Universal LPT StepDrive direction tool (WndLpt Tool)
Use any LPT port pins (2, 3, 4, 5, 6, 7, 8, 9, 1, 14, 16, 17) for stepdrive driver connection.
Trabajo Final de la Carrera de Ingeniería Electrónica de la UBA.
ROVduino is an open source robotics control system, primarily targeted for ROVs. However, rovduino is just as easily used in any environment. ROVduino was specifically designed to be used in harsh environments, and as such, is extremely robust.