Impact is an explicit Finite Element Program Suite which simulates dynamic impact events. It has a range of elements, contact handling and different material laws. Models can be created, solved and analyzed with the included pre- and postprocessor. Impact is based on an Explicit Time stepping algorithm. These kind of codes are used to simulate dynamic phenomena such as car crashes and similar, usually involving large deformations.
CNC code generator is a software to generate CNC codes (G & M codes) for maching operations like milling, drilling. At present CNC code generator is limited for end milling. we working on other machining operations like turning, drilling etc.
An EnergyPlus shell for parametric studies and more ...
Parametric analysis is often needed for exploring design options, especially when a global optimization method is not available, or the optimization result is in doubt. Parametric analysis can also be applied to all design variables simultaneously, which forms an exhaustive search that, providing that the search grid is fine enough, will guarantee a global optimum solution. In order to perform complex parametric analyses on multiple parameters with more than a handful of alternative values each, a tool to generate commands for the simulation model to run, and to collect results afterwards will be needed. jEPlus has been developed as such a parametric tool for EnergyPlus. To see jEPlus in action, check out this video: http://youtu.be/jBA7Q7npNK4 The source code of the jEPlus project is now hosted on GitHub: https://github.com/jeplus/jEPlus/
APP for control a manual mill and obtain a CNC Mill
APP for Android 3.1 or greater to implement a CNC Controller that send orders using USB port to Arduino Mega 2560 R3 board to control 3 stepper motor to have a real CNC mill /// APP para Android 3.1 o superior para implementar un Controlador de CNC que envia ordenes usando el puerto USB a la placa Arduino Mega 2560 R3 para controlar 3 motores paso a paso para tener una fresadora de CNC real.
Fachwerk calculates strut-and-tie models used by structural engineers for analysing and designing reinforced concrete structures. The program only uses the equilibrium conditions, thus it is not assuming elastic behaviour.
The PARSEC CEE is the primary achievement of several years of effort at NASA's Marshall Space Flight Center. The CEE was developed to allow engineers in the Advanced Concepts Department to rapidly prototype launch vehicle and spacecraft concepts.
Clothes - sewing CAD for creation of models of clothes. Based on the new concept of the automated designing of clothes with use of parametrical model. Creates a base design of model of clothes and allows to change it depending on necessity of updating.
Fachwerk3D calculates three-dimensional strut-and-tie models used by structural engineers for analysing and designing reinforced concrete structures. The program only uses the equilibrium conditions, thus it is not assuming elastic behaviour.
openCDT is a conceptual design tool for aircraft design
GeomSS is a geometry modeling and scripting system in Java. Write scripts that create and analyze complex geometry including NURBS curves and surfaces. This is especially useful for tasks that must be repeated with small or parametric variations.
Software to analyse 3D and 2D framed structures, also gives matrices
PSA(Program for Structural Analysis) is able to analyse Framed structures using FEM(Direct Stiffness Method). Apart from giving the analysed results, PSA is able to give user the various stiffness Matrices generated during the analysis, as web page.
HVAC Minimum Pipe Size Calculator
Starting off as a simple LISP command in AutoCAD this HAVC pipe size calculator was migrated to a standalone Java application. Calculates HVAC minimum pipe ID based on GPM and FPS for numerous fluid types (found in the fluid density chart on EngineeringToolbox.com) Includes a table to automatically calculate riser piping sizes per floor. Read the README.txt file included in PipeSize.zip for instructions.
Soil Sieve Test Analyzer is an application for analyzing results of sieve test. Sieve Test is part of Grading Test in Geotechnical Engineering that is part of Civil Engineering to classify mechanical soil behavior.
COPanno optimizes the panels cuts.
COPanno is now at http://download.tuxfamily.org/copanno/ COPanno is a small utility to find the best solution for cutting rectangular panels in a defined-size sheet. * v1.2 Introduce multi-threading (calculation is up to 8 times faster) and internationalization support. English and French translations are done. * v1.3 Add per panel orientation keeping Copanno est un utilitaire de calepinage donnant la meilleure manière de découper des panneaux rectangulaire dans une feuille de dimension définie. * v1.2 Le calcul parallèle permet d'accélérer le traitement sur les ordinateurs multi-cœurs. La traduction en Français et en Anglais est réalisée. * v1.3 La conservation de l'orientation des panneaux (le fil) peut être définie pour chaque élément.
Open channels hydraulics is very important part of hydraulic and civil engineering. Finding critical depth in open channel flows is a basic task in this field. This is an application for calculating critical depth in open channels flow.
Data Mining Platform is a platform for data mining and analysis. It contains many of the new and sophisticated methods such as kernel-based classification, two-way clustering, bayesian networks, pattern recognition for time series analysis and many other
A simple application for converting dxf drawings into cnc code (intended for plasma cnc cutters). It can be used as standalone application or as emc2 filter/plugin.
Secondary glazing for sash windows
Application for generating CAD scripts for drawing Glass Shutters for sash windows. Glass Shutters may be used as an alternative to double glazing where it is required to preserve the appearance of your traditional sash windows. The glass is toughened and has a coating which reflects heat back into the room while still letting in heat from the sun. The frameless panels are easily opened to allow access to the window. By choosing an appropriate style, the panel divisions can be made to coincide with the glazing bars. This minimizes the visual impact of the panels from inside while making them virtually invisible from the outside.
Utilities for CNC (G-Code) using Java
Utilities for CNC (G-Code) using Java
RedPlanner is an Open Source framework for core network planning. It is written in Java and based on Eclipse RCP. It is composed of several plug-in modules: optimization engine, physical equipment inventory, automatic equipment allocation, etc.
A java based editor for creating 3D indoor environments based on 2D input.
Software for the design and verification of railway interlocking systems.
The aim of this project is to develop a gear design program, which will be able to utilise any known contemporary tooth profile and perform strength calculations on it. A subsequent goal will be to include a life prediction functionality.
Software application, firmware and U.I. for 4-motors 3-axis milling machine, open hardware, software and mechanics. See also project in details for schematics and images on http://www.contesti.eu/opensource/xyz-dc-motor-controller