OpenGTS (Open Source GPS Tracking System) is a full featured web-based GPS tracking system for your fleet of vehicles. It supports OpenLayers and other map providers, detail/summary Reporting, and various GPS tracking devices.
OpenCPN: A concise ChartPlotter/Navigator. A cross-platform ship-borne GUI application supporting * GPS/GPDS Postition Input * BSB Raster Chart Display * S57 Vector ENChart Display * AIS Input Decoding * Waypoint Autopilot Navigation
QLandkarte GT is the ultimate outdoor aficionado's tool. It supports GPS maps in GeoTiff format as well as Garmin's img vector map format. Additional it is the PC side front end to QLandkarte M, a moving map application for mobile devices.
GPlates is an interactive plate-tectonics visualisation program. GPlates enables interactive visualisation and manipulation of the plate-tectonic reconstructions of geological and paleo-geographic features through geological time.
Multiplatform Ham Radio APRS and Mapping Program
NOTE: Code commits are FROZEN on SourceForge: New code is now at <http://github.com/Xastir/Xastir>. Real-time tracking & messaging of stations via radio/internet APRS data streams, w/125 map formats supported. Linux/FreeBSD/Solaris/MacOSX/Windows in any of 7 languages. Can also be used for mobile mapping w/GPS. MAILING LISTS ARE AT: PROJECT->WEB SITE.
** This site is of historical interest only. The project is active on www.gpsbabel.org and github. Some of the county/state files remain active, but no version of GPSBabel should be downloaded from this site. ** GPSBabel reads, writes, and manipulates GPS waypoints in a variety of formats. Over 100 supported formats include GPX, Magellan and Garmin serial and USB protocols, Geocaching *.loc, Garmin Mapsource, and Magellan Mapsend. For Windows, Linux, Mac.
OTB is an open-source C++ library for remote sensing images processing
The Orfeo Toolbox is a C++ library for high resolution remote sensing image processing. It is developped by CNES in the frame of the ORFEO program. More information is available at www.orfeo-toolbox.org It is based on the medical image processing library ITK and offers particular functionalities for remote sensing image processing in general and for high spatial resolution images in particular. Targeted algorithms for high resolution optical images (SPOT, Quickbird, Worldview, Landsat, Ikonos), hyperspectral sensors (Hyperion) or SAR (TerraSarX, ERS, Palsar) are available. Orfeo ToolBox has three main access depending on the category of user: write processing chains in C++ using existing filters or creating new ones, use the OTB applications, which is a plugin-based framework allowing to extend high-level processing chains from various environment ( command-line, QT, QGis, Python....) or use Monteverdi, a software for everyday life image manipulation and analysis.
JCT draws and edits thematic maps in Java. Primarily intended to geography teachers and their pupils.
WW2D allows you to explore Earth using satellite imagery, topographic maps and image from other data sources also providing large placenames and boundaries database and allowing you to install community-made add-ons for even more info about our planet.
The full-featured, easy-to-use desktop GIS with real processing power!
The Community Edition (gvSIG CE) is a fork of the gvSIG desktop GIS project (http://www.gvsig.org). It is open to external contributors and fully community-driven. Our official releases are designed to be portable and include all necessary binaries for Linux, Mac OS X and Windows. No installation necessary: Just download, unpack and run!
NOTE - All project resources are now hosted at http://qgis.org. Quantum GIS (QGIS) is a Geographic Information System (GIS). QGIS supports common vector and raster formats, including Shapefiles, PostGIS, GRASS, GeoTiff, TIFF, JPG, and many more.
EDAS2 is a web-based environmental quality data management and decision support framework
Space Time Analysis of Regional Systems: Combines a suite of geocomputational and dynamic visualization modules for the exploratory analysis of data measured for spatial and temporal units.
Automated detection of the unknown early map projection
New scientific software supporting the automated detection of the early map projection and its parameters. Useful for studying and analysis of different kinds of maps with the lack of information about the map projection. The analysis is based on the minimization of residuals between control points on the early and current reference maps. Designed for cartographers as well as for enthusiasts. Available free of charge. The awareness of the map projection is primarily important for: • refinement of spatial georeference for the medium- and small-scale maps, • analysis of the knowledge about the former world, • location of the incorrectly/inaccurately drawn map regions. Sytem requirements: • 2 GHz or faster 32-bit (x86) or 64-bit (x64) processor. • 2 GB RAM (32-bit) or 4 GB RAM (64-bit) system. • 120 MB available hard disk space. • JDK 1.8 +. • Internet connection (download speed > 2Mb/s
A reference implementation of the Polish geobotanical grid
This project is a reference, open source implementation of the coordinate conversion algorithms for the Polish geobotanical grid called ATPOL.
Batch convert Lat/Long to UTM for Zone 19
This simple R code converts GPS coordinates from Decimal Degrees or Degrees Minutes Seconds format to Northings and Eastings in UTM Zone 19. Coordinates should be entered as a .csv containing the column names "Latitude" and "Longitude" (capitalization does not matter). The code was designed primarily for use by researchers at the University of Maine working on the Penobscot River, but could be easily modified to handle other UTM Zones.
Use map data to plan hikes or explore new areas. Includes 3D maps of terrain rendered in real-time; trace trails across the terrain and get height verses distance profiles; tile together adjacent maps to create seamless map areas. Reads USGS SDTS files.
Integrated Heritage Management System that includes a Generic Geographical Information System for the management of the World Heritage sites.
monoGIS will be a complete GIS suite for the Mono platform. The current milestone release includes an internet mapserver, OGC WMS implementation and some tools like spatial format conversion. For other projects using monoGIS see mdwglib and Appomattox.
3D Online Content Management System
Atena č il primo programma topografico rilasciato con licenza Open Source che usa PREGEO 8 come motore di calcolo. Le funzionalitŕ previste sono: creazione visuale di punti, disegno di contorni, creazione curve di livello, DTM3D, profili e sezioni, ecc..
Python script for Geocachers. Takes GPX file (eg from Geotoad), downloads waypoints to Garmin Etrex, and produces OpenOffice quick-reference document with the descriptions and hints.
A nautical GIS navigation software written in Perl/Tk running on Windows, Linux and Macintosh platforms. It allows to calibrate maps,trace paths and show and record GPS and other NMEA informations.
ForeRunner X01 toolkit provides an easy access to Forerunner 201/301/305/305E GPS-units. There are multiple command line tools to read data from GPS into database and tools to export data in different formats like gpx and tcx.