CLISP is a portable ANSI Common Lisp implementation and development environment by Bruno Haible. Interpreter, compiler, debugger, CLOS, MOP, FFI, Unicode, sockets, CLX. UI in English, German, French, Spanish, Dutch, Russian, and Danish.
Version 2 of the myFocuser Project
Version 2, myFocuserPro2 for telescopes controlled by Arduino Nano. Many different options and driver board supported. Ongoing support. (c) Copyright Robert Brown 2014-2018. All Rights Reserved. YOU MAY NOT SELL CONTROLLERS OR PCBs BASED ON THIS PROJECT without express written permission granted from the author. Schematics, Code, Firmware, Ideas, Applications, Layout are protected by International Copyright Law. Permission is NOT granted to any person to redistribute, market, manufacture or sell for commercial gain the myFocuserPro products, ideas, PCB's, circuits, builds, variations and units described or discussed herein or on this site. Permission granted for personal and Academic use only. THIS MEANS THAT YOU CANNOT COPY/RE-DESIGN AND MAKE AVAILABLE KITS OR PCB BASED ON THIS PROJECT AND OFFER THOSE KITS OR PCB FOR SALE TO OTHERS. THAT IS A BREACH OF COPYRIGHT. Use of this project, circuit, firmware and applications is deemed acceptance of the above.
PICSimLab is a realtime emulator for PIC and Arduino
PICSimLab is a realtime emulator of development boards with integrated MPLABX/avr-gdb debugger. PICSimLab supports picsim microcontrollers (PIC16F84, PIC16F628, PIC16F648, PIC16F777, PIC16F877A, PIC18F452, PIC18F4520, PIC18F4550 and PIC18F4620) and simavr microcontrollers (ATMEGA328). PICSimLab have integration with MPLABX/Arduino IDE for programming the boards microcontrollers.
An USB programmer for various devices, including PIC, dsPIC, AVR microcontrollers, and various kinds of serial eeproms
Precise Calculator has arbitrary precision and can calculate with complex numbers, fractions, vectors and matrices. Has more than 150 mathematical functions and statistical functions and is programmable (if, goto, print, return, for).
Arduino Focuser, fully ASCOM complaint
A stepper motor focus controller (DIY) based on Arduino Nano/Uno. (c) Copyright Robert Brown 2014-2018. All Rights Reserved. YOU MAY NOT SELL CONTROLLERS OR PCBs BASED ON THIS PROJECT without express written permission granted from the author. Schematics, Code, Firmware, Ideas, Applications, Layout are protected by International Copyright Law. Permission is NOT granted to any person to redistribute, market, manufacture or sell for commercial gain the myFocuserPro products, ideas, PCB's, circuits, builds, variations and units described or discussed herein or on this site. Permission granted for personal and Academic use only. THIS MEANS THAT YOU CANNOT COPY/RE-DESIGN AND MAKE AVAILABLE KITS OR PCB BASED ON THIS PROJECT AND OFFER THOSE KITS OR PCB FOR SALE TO OTHERS. THAT IS A BREACH OF COPYRIGHT. Use of this project, circuit, firmware and applications is deemed acceptance of the above.
Automated integer factorization
YAFU (with assistance from other free software) uses the most powerful modern algorithms (and implementations of them) to factor input integers in a completely automated way. The automation within YAFU is state-of-the-art, combining factorization algorithms in an intelligent and adaptive methodology that minimizes the time to find the factors of arbitrary input integers. Most algorithm implementations are multi-threaded, allowing YAFU to fully utilize multi- or many-core processors (including SNFS, GNFS, SIQS, and ECM). YAFU is primarily a command-line driven tool. You provide the number to factor and, via screen output and log files, YAFU will provide you the factors. There is also an interactive environment similar to MATLAB or PARI/GP, where you can type commands and store results. YAFU is very customizable, through the optional use of many many command line parameters and a very capable expression interpreter.
Mecrisp - A native code Forth implementation for MSP430 microcontrollers
Serial Bootloader for Microchip, Atmel, NXP, TI, 8051 microcontrolers
What is it? It's a Bootloader for Microchip, Atmel, NXP, TI and 8051 devices. A Bootloader is a firmware running in the microcontroler device which allows the user to send it's own firmware without the need of a programmer. This Bootloader consists of: - firmwares for many devices (this firmware need to be send to the device's flash memory with a programmer, only once) - a PC software which communicates with the bootloader firmware in the device and send the user's program in its memory Where does it come from? This Bootloader is based on "Tiny PIC Bootloader" made by Claudiu Chiculita. A special THANK to him!!! What can it do? It can program: - Microchip PIC10/12/16/18/24/32/dsPIC30/33 - Atmel ATtiny, ATmega - TI MPS430 - NXP ARM Cortex-M0+ - Silicon Labs C8051 And this: - with light modifications to the Bootloader firmware for new devices - without modifying your source code or using a special linker script - via GUI or command line prog - with automatic Reset
The GNU Prolog native compiler
GNU Prolog is a free implementation (under GPL) of the logic programming language PROLOG. It can compile to native machine code which is extremely fast in execution. Another feature is the included constraint solver.
Microcontroller based PC Oscilloscope
PPMScope is a do-it-yourself oscilloscope with an open source design. The intent is that the project can be constructed by an electronics hobbiest using the instructions included. The design is a compromise between features and cost. The bandwidth is lower than a commercial scope, so it's use is limited to signals of 500 kHz and below. It's sample buffer is also smaller than a commercial scope, however sufficient for most oscilloscope functions. This is a version based on the PIC16F877A microcontroller running with a 20MHz clock. The maximum sampling rate is 1 MHz with a 5 Mhz equivalent sampling mode. Currently, the computer interface supports USB, serial, and parallel ports. Good luck on the construction and I hope you enjoy your oscilloscope. I am happy to answer any questions or provide technical support for this design.
Unicornscan is an asynchronous TCP and UDP port scanner developed by the late Jack C. Louis.
Rejacker is an toolkit set for PE repair, manualy optimize after unpack.
fractal explorer with movie recording, deep zoom, multicore and more
Fractice is a fractal explorer/renderer for Windows. It supports navigation, thumbnails, previews, deep zoom, printing, posters, palettes, multicore and distributed processing, movie recording, undo/redo, job control, VJ mixing, dual-monitor, & MIDI.
Custom firmware and IDE for the VEX Cortex Microcontroller
This project has been moved to http://pros.cs.purdue.edu/ PROS is a lightweight and fast alternative operating system for the VEX Cortex Microcontroller. It features multitasking, low-level control, and Wiring compatible functions to harness the full power of the Cortex. With a real-time kernel based on FreeRTOS and a development environment built on Eclipse CDT, PROS uses proven software to increase the reliability and usability of the VEX development system across all three major computing platforms. PROS is currently under active development to make it usable for VEX high school and middle school teams. PROS is intended for advanced VEX users seeking to move beyond competing environments. Eclipse and FreeRTOS have their own licensing agreements. Please see http://www.eclipse.org/legal/epl-v10.html and http://www.freertos.org/a00114.html for details.
Collection of fast and optimized assembly libraries for x86-64 Linux
LinAsm is collection of very fast and SIMD optimized assembly written libraries for x86-64 Linux. It implements many common and widely used algorithms for array manipulations: searching, sorting, arithmetic and vector operations, unit conversions; fast mathematical and statistic functions; numbers and time converting algorithms; finite impulse response (FIR) digital filters; spectrum analysis algorithms, Fast Hartley transformation; CPU cache friendly functions and extremely fast abstract data types (ADT) such as hash tables b-trees, and much more. LinAsm libraries are written on FASM assembly language. They are stable and have appropriate benchmarks for many units. All libraries are well documented and grouped by their functionality. To get more information about this library, please visit the official web site: http://linasm.sourceforge.net
View, manipulate, analyze (LS fit, SVD, FT), and make figs of, spectra
Program for viewing, editing, manipulating, and analyzing absorbance spectra. Simple arithnetic includes making linear combinatins of up to 10 spectra. Advanced functions include fitting spectra as LC of standard basis spectra, singular value decomposition, Fourier transform, differentiation, integration, global fitting of 3D titration and kinetic data. Graphics features allow composing Figures and export to postscript files which can be converted to pdf, imported into photoshop for rasterization, or used in page design software like Illustrator.
OpenPFGW is software that is designed to perform PRP and primality tests on numbers of specific forms. This software currently run on any x86 hardware with the support of George Woltman's gwnum library, the same library behind GIMPS and Prime95.
Create 3D models easily in Win95,NT,XP,Vista,Win7 on all desktops, laptops and even netbooks without any 3D hardware acceleration. Supports 3DS, DXF, WRL, POV, ASC, spreadsheet & compressed files, extrude/sweep, mesh edit, parametric NURBS curves ...
A memory device programmer (Flash / EPROM / E2PROM) board and software, connected to PC by USB port. Placa e software para gravação de memórias (Flash / EPROM / E2PROM), conectada ao PC através de porta USB.
Simple 8085 assembler and disassembler for educational use. The 8085asm generates the map file and intel hex file. It support the directives EQU, ORG, DB, DS and END.
a firmware for AVR910 programmer. started from ver3.8 (http://www.mikrocontroller-projekte.de/Mikrocontroller/AVR-Prog/AVR-Programmer.html) upgraded for speed and reliability. provided generic masterSPI interface please mail me on AlexRainPE196@hotbox.ru
FFFF is the fastest Win32/OSX/Linux/IRIX Mandelbrot generator. Features OpenGL, realtime zoom, SSE/AltiVec QuadPixel, SSE2/3DNow! DualPixel calc, FPU per pixel calc, GPU asm (Fragment/Vertex) calc, multiprocessor support, and benchmarking. Opt asm code!
Microcontroller (AVR) based standalone digital light controllers ("dimmers"). The "Diamond" series supports 20 channels (TRIAC, FET, 0-10V, relay) with automatic fading, 20 scenes, 21 timers, IR remote, LCD, DMX-512 interface, global standby & more.
UART communications with data flow monitoring
A simple to use serial communication software for communicating with other serial, MCU and Arduino. The SoftIB Serial Communicator communicates with other Serial devices that use a simple asynchronous communication using only the RX and TX signals without any control signals. The application was developed based on the communication with microcontrollers, but it can be used in all other cases.