PICSimLab is a realtime emulator for PIC and Arduino
PICSimLab is a realtime emulator of development boards with integrated MPLABX/avr-gdb debugger. PICSimLab supports picsim microcontrollers (PIC16F84, PIC16F628, PIC16F648, PIC16F777, PIC16F877A, PIC18F452, PIC18F4520, PIC18F4550 and PIC18F4620) and simavr microcontrollers (ATMEGA328). PICSimLab have integration with MPLABX/Arduino IDE for programming the boards microcontrollers.
Avr Libraries aims at create complete drivers and services libraries for use on AVR 8-bits MCU.
"DSO" is a Digital Signal Oscilloscope. My DSO will be connected via the USB to the PC. All software to operate the DSO is developed within this project.
The goal of this project is to build a centralized domotic system. This project contents three parts: - An electronic part; - An embedded software part (PIC Microship controller); - A PC software part (Dotnet/Mono)
Digital Signal Processing Block Diagram Compiler - user extendable to all DSP's, but presently supports only the TI C2000 family. Rich support for fixed point arithmetic, both saturated and unsaturated. Block diagram entry is via TinyCAD (included).
The idea of this project is automatize hydrogen Booster system created by Stanley Meyer to implement it in cars,trucks and electric plants as well as for production of free energy.
EDA / PCB software to envelope and manufacture printed circuit boards
LTProg is pindriver technology multi devices programmer througth the PC USB Port
PicOload is a programmer and a bootloader that allow to program a PIC 16f87X / 16f87XA using a RS232 serial line whithout leaving the chip from his support and without disturbing the rest of the device
QUASI is stand-alone AVR RISC processor simulator with debugging features, EDA-like GUI and plugin interface.
SDL REFLEX is the micro kernel of a real time operating system for the AVR microcontroller family. The kernel is especially designed to implement systems described in SDL The Specification and Description Language . Compiler GNU ANSI-C for AVR v.3.3
SECU86 is Standard Engine Control Unit x86. The project goal is to develop a standard computer and OS (opensource) that would work on any car. It'll be based on the x86 processor and will try to replace the poor standard ECU that comes with any car.
vcomp is a verilog compiler for x86 linux targets - it was a commercial product which is now in the process of being GPL'd
asfpga is an assembler written for use in FPGA design. It can be easily modified for your instruction set. The ultimate goal of this software is to allow a FPGA designer to easily write assembly code for a custom instruction set. The current version al
GPICD - The GNU PIC Programmer and In-Circuit Debugger. GPICD is an open-source Programmer and In-Circuit debugger for the Microchip (TM) PIC (TM) family of microcontrollers. It is an ideal complement for the gputils development tool set.
The ixo.de USB JTAG pod and firmware allows to access JTAG-capable chips via USB and a protocol like Altera USB-Blaster.
PPort is a simple yet handy automation program and its documented counterpart for interfacing a PC with external devices. With this bundle, one can control any household appliance or electronic device with minimal hassle and practically no changes