C API to control NexStar compatible telescopes
This library implements the serial commands supported by the Celestron NexStar hand control (HC) and SkyWatcher/Orion SynScan HC. This applies to the Celestron: NexStar GPS, NexStar GPS-SA, NexStar iSeries, NexStar SE Series, NexStar GT, CPC, SLT, Advanced-VX, Advanced-GT, CGE, CGEM etc. SkyWatcher: EQ5, HEQ5, EQ6 (Pro), AZ-EQ5 GT, AZ-EQ6 GT, EQ8 etc. and the corresponding Orion mounts. Communication to the hand control is 9600 bits/sec, no parity and one stop bit via the RS-232 port on the base of the hand control. Communication can be established over TCP/IP if nexbridge is running on the computer connected to the telescope. To control network based telescopes nexbridge must be used on the remote site. https://sourceforge.net/projects/nexbridge/
Ksetiwatch monitors multiple SETI@home clients running on your computer or in your local network, and logs/manages completed work units. It is developed for the K Desktop Environment.
A console-based monitoring tool for SETI@home.