Search Results for "python file"

Image of OpenWrt OS, with snort community featured in, for Raspberry Pi 4/ 4B+ and 400, basically for Processor BCM2711. Installed Snort Community Model to Intrusion Detection system. Prevention system not installed. eth0 used as output/ LAN socket, to run internet and access router. eth1, which can be USB -> Ethernet port, is used as WAN port, to connect Pi board to Internet IP. to flash img file, you can restore in SD card, or use Balena Etcher to flash. or you can use DD...

Python script for pushing the same configuration (stored in a predefined file) on multiple devices at the same time via SSHv2. The script reads the IPs of the devices from the NETWORK_IP file, then gets the SSHv2/Telnet credentials from the SSH_USERPASS file and sends the commands you enter in the CMD_FILE file to all the devices.

Python script for pushing the same configuration (stored in a predefined file) on multiple devices at the same time via Telnet. The script reads the IPs of the devices from the NETWORK_IP file and sends the commands you enter in the CMD_FILE file to all the devices. Telnet username/password parameters are configured within the script.

...Prior to running the script, the user should configure SNMPv2 community string on the device and also include the subnet between his PC and the router into the OSPF process, so he has IP connectivity to all other OSPF nodes. After providing necessary info and the OSPF info is gathered, the user has three choices: display the OSPF routers info on the screen, export the data to a file for Excel importing and generate the OSPF topology showing neighborships, router IDs and neighbor IPs. Tools used for coding and testing: Python 2.7.3, PySNMP, GNS3, Linux. Tested on Cisco 2621, 2691, 3660.

Proxy Tester is a proxy list tester and then it generates a wpad.dat file you can use for your browser based on working servers. wpad.dat file selects a random proxy server from the list of provided working proxy servers with each connection request.