Search Results for "file system"

Image of OpenWrt OS, with snort community featured in, for Raspberry Pi 4/ 4B+ and 400, basically for Processor BCM2711. Installed Snort Community Model to Intrusion Detection system. Prevention system not installed. eth0 used as output/ LAN socket, to run internet and access router. eth1, which can be USB -> Ethernet port, is used as WAN port, to connect Pi board to Internet IP. to flash img file, you can restore in SD card, or use Balena Etcher to flash. or you can use DD commend of UNIX. **USERNAME** - root **PASSWORD** - bing.google12

Python script for pushing the same configuration (stored in a predefined file) on multiple devices at the same time via SSHv2. The script reads the IPs of the devices from the NETWORK_IP file, then gets the SSHv2/Telnet credentials from the SSH_USERPASS file and sends the commands you enter in the CMD_FILE file to all the devices. The script also checks if all the needed files exist, if all the IP addresses are valid and if all the devices are reachable. Tools used: Python 2.7.3,...

Python script for pushing the same configuration (stored in a predefined file) on multiple devices at the same time via Telnet. The script reads the IPs of the devices from the NETWORK_IP file and sends the commands you enter in the CMD_FILE file to all the devices. Telnet username/password parameters are configured within the script. This feature can be further customized to prompt the user for them or read them from a file. The script also checks if all the needed files exist, if...

OSPF_SNMP_v1.0.py is an OSPF network discovery script. It allows the discovery of all OSPF network devices in the network, without connecting to each of them or knowing all their IP addresses. The user must provide the IP and SNMP community string of a single OSPF device in the network (for example, a device in the core) and the script searches for all other OSPF routers. Prior to running the script, the user should configure SNMPv2 community string on the device and also include the subnet...

Proxy Tester is a proxy list tester and then it generates a wpad.dat file you can use for your browser based on working servers. wpad.dat file selects a random proxy server from the list of provided working proxy servers with each connection request.